component
SGM3005XMS
Public Made by Adomby adom
SGMICRO Analog Switches, Multiplexers, MSOP-10. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSGM3005XMS
SGMICRO · Analog Switches, Multiplexers · MSOP-10
SGM3005XMS from SGMICRO, in a MSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | V+ | power_in | Power supply input; the datasheet specifies single-supply operation from +1.8 V to +5.5 V, with absolute maximum V+ to GND of -0.3 V to +6 V. |
| 2 | NO1 | bidirectional | Normally-open terminal of switch 1, connected to COM1 when IN1 is logic 1; continuous current is limited to ±300 mA and peak current to ±500 mA. |
| 3 | COM1 | bidirectional | Common terminal of switch 1, connected to NC1 when IN1 is logic 0 and to NO1 when IN1 is logic 1; signals beyond V+ are clamped by internal diodes and forward diode current must be limited. |
| 4 | IN1 | input | Digital control input selecting the COM1 connection; VINH is 2.4 V min and VINL is 0.8 V max at V+ = 5 V (2.0 V min and 0.4 V max at V+ = 3 V). |
| 5 | NC1 | unconnected | Normally-closed terminal of switch 1, connected to COM1 when IN1 is logic 0; continuous current is limited to ±300 mA and peak current to ±500 mA. |
| 6 | GND | power_in | Ground reference pin for the device, at 0 V. |
| 7 | NC2 | unconnected | Normally-closed terminal of switch 2, connected to COM2 when IN2 is logic 0; continuous current is limited to ±300 mA and peak current to ±500 mA. |
| 8 | IN2 | input | Digital control input selecting the COM2 connection; VINH is 2.4 V min and VINL is 0.8 V max at V+ = 5 V (2.0 V min and 0.4 V max at V+ = 3 V). |
| 9 | COM2 | bidirectional | Common terminal of switch 2, connected to NC2 when IN2 is logic 0 and to NO2 when IN2 is logic 1; signals beyond V+ are clamped by internal diodes and forward diode current must be limited. |
| 10 | NO2 | bidirectional | Normally-open terminal of switch 2, connected to COM2 when IN2 is logic 1; continuous current is limited to ±300 mA and peak current to ±500 mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SGMICRO |
| Package | MSOP-10 |
| Category | Interface |
| Pins | 10 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (V+ to GND, single supply) | V+ | 1.8 | 5.5 | V | Single supply, as stated in General Description | 1 | |
| V+ to GND | -0.3 | 6 | V | 2 | |||
| Analog, digital voltage range | -0.3 | V | Printed maximum is V+ + 0.3V; not a fixed number | 2 | |||
| Continuous current NO, NC, or COM | -300 | 300 | mA | 2 | |||
| Peak current NO, NC, or COM | -500 | 500 | mA | 2 | |||
| Operating temperature range | -40 | 125 | °C | 2 | |||
| Junction temperature | 150 | °C | 2 | ||||
| Storage temperature | -65 | 150 | °C | 2 | |||
| Analog signal range (5 V) | VNO, VNC, VCOM | 0 | V | V+ = +5 V ±10%, TA = -40°C to +125°C; max printed as V+ | 3 | ||
| On-resistance (5 V, +25°C) | RON | 0.5 | 0.9 | Ω | V+ = +5 V ±10%; TA = +25°C; 0 ≤ VNO or VNC ≤ V+, ICOM = −10 mA, Test Circuit 1 | 3 | |
| On-resistance (5 V, -40°C to +125°C) | RON | 1.1 | Ω | V+ = +5 V ±10%; TA = -40°C to +125°C; 0 ≤ VNO or VNC ≤ V+, ICOM = −10 mA, Test Circuit 1 | 3 | ||
| On-resistance match between channels (5 V, +25°C) | ΔRON | 0.05 | 0.09 | Ω | V+ = +5 V ±10%; TA = +25°C; 0 ≤ VNO or VNC ≤ V+, ICOM = −10 mA, Test Circuit 1 | 3 | |
| On-resistance match between channels (5 V, -40°C to +125°C) | ΔRON | 0.12 | Ω | V+ = +5 V ±10%; TA = -40°C to +125°C; 0 ≤ VNO or VNC ≤ V+, ICOM = −10 mA, Test Circuit 1 | 3 | ||
| On-resistance flatness (5 V, +25°C) | RFLAT(ON) | 0.25 | 0.3 | Ω | V+ = +5 V ±10%; TA = +25°C; 0 ≤ VNO or VNC ≤ V+, ICOM = −10 mA, Test Circuit 1 | 3 | |
| On-resistance flatness (5 V, -40°C to +125°C) | RFLAT(ON) | 0.4 | Ω | V+ = +5 V ±10%; TA = -40°C to +125°C; 0 ≤ VNO or VNC ≤ V+, ICOM = −10 mA, Test Circuit 1 | 3 | ||
| Source OFF leakage current (5 V, +25°C) | INC(OFF), INO(OFF) | -10 | 4 | 10 | nA | V+ = +5 V ±10%; TA = +25°C; VNO or VNC = 4.5V/1V, VCOM = 1V/4.5V, V+ = +5.5V, Test Circuit 2 | 3 |
| Source OFF leakage current (5 V, -40°C to +125°C) | INC(OFF), INO(OFF) | -1000 | 1000 | nA | V+ = +5 V ±10%; TA = -40°C to +125°C; VNO or VNC = 4.5V/1V, VCOM = 1V/4.5V, V+ = +5.5V, Test Circuit 2 | 3 | |
| Channel ON leakage current (5 V, +25°C) | INC(ON), INO(ON), ICOM(ON) | -10 | 4 | 10 | nA | V+ = +5 V ±10%; TA = +25°C; VNO or VNC = VCOM = 1V or 4.5V, V+ = +5.5V, Test Circuit 3 | 3 |
| Channel ON leakage current (5 V, -40°C to +125°C) | INC(ON), INO(ON), ICOM(ON) | -1000 | 1000 | nA | V+ = +5 V ±10%; TA = -40°C to +125°C; VNO or VNC = VCOM = 1V or 4.5V, V+ = +5.5V, Test Circuit 3 | 3 | |
| Input high voltage (5 V) | VINH | 2.4 | V | V+ = +5 V ±10% | 3 | ||
| Input low voltage (5 V) | VINL | 0.8 | V | V+ = +5 V ±10% | 3 | ||
| Input current (5 V, +25°C) | IINL or IINH | -0.1 | 0.01 | 0.1 | µA | V+ = +5 V ±10%; TA = +25°C; VIN = VINH or VINH | 3 |
| Input current (5 V, -40°C to +125°C) | IINL or IINH | -1 | 1 | µA | V+ = +5 V ±10%; TA = -40°C to +125°C; VIN = VINH or VINH | 3 | |
| Power supply current (5 V) | I+ | 0.001 | 1 | µA | V+ = +5.5V, VIN = 0V or 5V | 3 | |
| Analog signal range (3 V) | VNO, VNC, VCOM | 0 | V | V+ = +3 V ±10%, TA = -40°C to +125°C; max printed as V+ | 4 | ||
| On-resistance (3 V, +25°C) | RON | 0.6 | 1 | Ω | V+ = +3 V ±10%; TA = +25°C; 0 ≤ VNO or VNC ≤ V+, ICOM = −10 mA, Test Circuit 1 | 4 | |
| On-resistance (3 V, -40°C to +125°C) | RON | 1.3 | Ω | V+ = +3 V ±10%; TA = -40°C to +125°C; 0 ≤ VNO or VNC ≤ V+, ICOM = −10 mA, Test Circuit 1 | 4 | ||
| On-resistance match between channels (3 V, +25°C) | ΔRON | 0.05 | 0.1 | Ω | V+ = +3 V ±10%; TA = +25°C; 0 ≤ VNO or VNC ≤ V+, ICOM = −10 mA, Test Circuit 1 | 4 | |
| On-resistance match between channels (3 V, -40°C to +125°C) | ΔRON | 0.13 | Ω | V+ = +3 V ±10%; TA = -40°C to +125°C; 0 ≤ VNO or VNC ≤ V+, ICOM = −10 mA, Test Circuit 1 | 4 | ||
| On-resistance flatness (3 V, +25°C) | RFLAT(ON) | 0.25 | 0.3 | Ω | V+ = +3 V ±10%; TA = +25°C; 0 ≤ VNO or VNC ≤ V+, ICOM = −10 mA, Test Circuit 1 | 4 | |
| On-resistance flatness (3 V, -40°C to +125°C) | RFLAT(ON) | 0.4 | Ω | V+ = +3 V ±10%; TA = -40°C to +125°C; 0 ≤ VNO or VNC ≤ V+, ICOM = −10 mA, Test Circuit 1 | 4 | ||
| Source OFF leakage current (3 V, +25°C) | INC(OFF), INO(OFF) | -11 | 5 | 11 | nA | V+ = +3 V ±10%; TA = +25°C; VNO or VNC = 3V/1V, VCOM = 1V/3V, V+ = +3.3V, Test Circuit 2 | 4 |
| Source OFF leakage current (3 V, -40°C to +125°C) | INC(OFF), INO(OFF) | -1000 | 1000 | nA | V+ = +3 V ±10%; TA = -40°C to +125°C; VNO or VNC = 3V/1V, VCOM = 1V/3V, V+ = +3.3V, Test Circuit 2 | 4 | |
| Channel ON leakage current (3 V, +25°C) | INC(ON), INO(ON), ICOM(ON) | -11 | 5 | 11 | nA | V+ = +3 V ±10%; TA = +25°C; VNO or VNC = VCOM = 1V or 3V, V+ = +3.3V, Test Circuit 3 | 4 |
| Channel ON leakage current (3 V, -40°C to +125°C) | INC(ON), INO(ON), ICOM(ON) | -1000 | 1000 | nA | V+ = +3 V ±10%; TA = -40°C to +125°C; VNO or VNC = VCOM = 1V or 3V, V+ = +3.3V, Test Circuit 3 | 4 | |
| Input high voltage (3 V) | VINH | 2 | V | V+ = +3 V ±10% | 4 | ||
| Input low voltage (3 V) | VINL | 0.4 | V | V+ = +3 V ±10% | 4 | ||
| Input current (3 V, +25°C) | IINL or IINH | -0.1 | 0.01 | 0.1 | µA | V+ = +3 V ±10%; TA = +25°C; VIN = VINH or VINH | 4 |
| Input current (3 V, -40°C to +125°C) | IINL or IINH | -1 | 1 | µA | V+ = +3 V ±10%; TA = -40°C to +125°C; VIN = VINH or VINH | 4 | |
| Power supply current (3 V) | I+ | 0.001 | 1 | µA | V+ = +3.3V, VIN = 0V or 3V | 4 |
CAD (KiCad official)
- Symbol:
SGM3005XMS - Footprint:
Package_SO:MSOP-10_3x3mm_P0.5mm - 3D model: MSOP-10 (KiCad packages3D, STEP)
- 3D model files:
sgm3005xms-etched.step/sgm3005xms-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sgm3005xms.step/sgm3005xms.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SGMICRO datasheet (11 pp, sha256
9b3e1fbdc5c31fcf, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).