Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LT1763MPDE-3.3#PBF

Analog Devices · Linear Voltage Regulators (LDO) · DFN-12-EP(3x4)

LT1763MPDE-3.3#PBF from Analog Devices, in a DFN-12-EP(3x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No connect pin with no connection to any internal circuitry; it may be tied to GND or VIN or left floating.
2 OUT power_out Output pin supplies power to the load and requires a minimum output capacitor of 3.3µF to prevent oscillations.
3 OUT power_out Output pin supplies power to the load and requires a minimum output capacitor of 3.3µF to prevent oscillations.
4 NC unconnected No connect pin with no connection to any internal circuitry; it may be tied to GND or VIN or left floating.
5 SENSE input For the fixed LT1763-3.3 this pin is the error amplifier input and should be connected to OUT at the load for optimum regulation, with a SENSE bias current of 10µA at the nominal output voltage.
6 BYP passive Bypass pin is internally clamped to ±0.6V and takes a capacitor of at most 0.01µF to reduce output noise to a typical 20µVRMS over 10Hz to 100kHz; leave unconnected if unused.
7 GND power_in Ground pin that should be connected directly to the exposed pad (pin 13) and to the bottom of the output voltage setting divider.
8 SHDN input Shutdown pin turns the output off when pulled low and must be connected to VIN if unused, since the device enters shutdown if it is left unconnected.
9 NC unconnected No connect pin with no connection to any internal circuitry; it may be tied to GND or VIN or left floating.
10 IN power_in Input pin supplies power to the device and withstands reverse voltages with respect to ground and OUT; a bypass capacitor of 1µF to 10µF is sufficient.
11 IN power_in Input pin supplies power to the device and withstands reverse voltages with respect to ground and OUT; a bypass capacitor of 1µF to 10µF is sufficient.
12 NC unconnected No connect pin with no connection to any internal circuitry; it may be tied to GND or VIN or left floating.
13 GND power_in Exposed pad is the GND electrical and thermal connection and must be soldered to the PCB ground and tied directly to pin 7.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package DFN-12-EP(3x4)
Category Power Supply Chip
Pins 13

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Minimum Operating Voltage 1.8 2.35 V MP Grade: ILOAD = 500mA (Notes 3, 11) 4
Regulated Output Voltage VOUT 3.267 3.3 3.333 V VIN = 3.8V, ILOAD = 1mA 4
Regulated Output Voltage VOUT 3.22 3.3 3.38 V 4.3V < VIN < 20V, 1mA < ILOAD < 500mA 4
Line Regulation 1 5 mV ∆VIN = 3.8V to 20V, ILOAD = 1mA 4
Load Regulation 7 17 mV VIN = 4.3V, ∆ILOAD = 1mA to 500mA 4
Load Regulation 33 mV VIN = 4.3V, ∆ILOAD = 1mA to 500mA 4
Dropout Voltage 0.13 0.19 V VIN = VOUT(NOMINAL), ILOAD = 10mA 4
Dropout Voltage 0.25 V VIN = VOUT(NOMINAL), ILOAD = 10mA 4
Dropout Voltage 0.17 0.22 V VIN = VOUT(NOMINAL), ILOAD = 50mA 4
Dropout Voltage 0.32 V VIN = VOUT(NOMINAL), ILOAD = 50mA 4
Dropout Voltage 0.2 0.24 V VIN = VOUT(NOMINAL), ILOAD = 100mA 4
Dropout Voltage 0.34 V VIN = VOUT(NOMINAL), ILOAD = 100mA 4
Dropout Voltage 0.3 0.35 V VIN = VOUT(NOMINAL), ILOAD = 500mA 4
Dropout Voltage 0.45 V VIN = VOUT(NOMINAL), ILOAD = 500mA 4
GND Pin Current 30 75 µA VIN = VOUT(NOMINAL), ILOAD = 0mA 5
GND Pin Current 65 120 µA VIN = VOUT(NOMINAL), ILOAD = 1mA 5
GND Pin Current 1.1 1.6 mA VIN = VOUT(NOMINAL), ILOAD = 50mA 5
GND Pin Current 2 3 mA VIN = VOUT(NOMINAL), ILOAD = 100mA 5
GND Pin Current 5 8 mA VIN = VOUT(NOMINAL), ILOAD = 250mA 5
GND Pin Current 11 16 mA VIN = VOUT(NOMINAL), ILOAD = 500mA 5
Current Limit 520 mA MP Grade: VIN = 2.35V (Note 12), ∆VOUT = -0.1V 5
Input Reverse Leakage Current 1 mA VIN = -20V, VOUT = 0V 5
Shutdown Threshold (Off to On) 0.25 0.8 V VOUT = Off to On 5
Shutdown Threshold (On to Off) 0.65 2 V VOUT = On to Off 5
Reverse Output Current 10 20 µA LT1763-3.3: VOUT = 3.3V, VIN < 3.3V 5
Ripple Rejection 50 65 dB VIN, VOUT = 1.5V (Avg), VRIPPLE = 0.5VP-P, fRIPPLE = 120Hz, ILOAD = 500mA 5
IN Pin Voltage -20 20 V 2
OUT Pin Voltage -20 20 V 2
Input to Output Differential Voltage -20 20 V 2
SENSE Pin Voltage -20 20 V 2
BYP Pin Voltage -0.6 0.6 V 2
SHDN Pin Voltage -20 20 V 2
Operating Junction Temperature Range (MP Grade) TJ -55 125 °C MP Grade 2
Storage Temperature Range (DFN Package) -65 150 °C DFN Package 2
Maximum Junction Temperature TJMAX 125 °C DE12 package 2
Input Voltage Range VIN 1.8 20 V Wide Input Voltage Range 1
Minimum Output Capacitor COUT 3.3 µF Required to prevent oscillations 15
Output Capacitor ESR ESR 3 Ω Maximum ESR with minimum 3.3µF output capacitor 15
Output Voltage Noise 20 µVRMS COUT = 10µF, CBYP = 0.01µF, ILOAD = 500mA, BW = 10Hz to 100kHz 5
Quiescent Current in Shutdown 0.1 1 µA VIN = 6V, VSHDN = 0V 5
SHDN Pin Current 0.1 µA VSHDN = 0V 5
SHDN Pin Current 1 µA VSHDN = 20V 5
Thermal Resistance Junction-to-Ambient θJA 40 °C/W DE12 package, 2500mm2 board and copper area 2
Thermal Resistance Junction-to-Ambient θJA 60 °C/W DE12 package, 100mm2 copper area 16
Thermal Resistance Junction-to-Case θJC 5 °C/W DE12 package 2

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts COPPER Table 1. DE Package, 12-Lead DFN COPPER AREA 16

CAD (KiCad official)

  • Symbol: LT1763MPDE-3.3#PBF
  • Footprint: Package_DFN_QFN:DFN-12-1EP_3x4mm_P0.5mm_EP1.7x3.3mm
  • 3D model: DFN-12-EP(3x4) (KiCad packages3D, STEP)
  • 3D model files: lt1763mpde-3-3-pbf-etched.step / lt1763mpde-3-3-pbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt1763mpde-3-3-pbf.step / lt1763mpde-3-3-pbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (22 pp, sha256 2bc1aa72821928b4, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF