3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownM95128-RMN6P
STMicroelectronics · EEPROM · SOIC-8
M95128-RMN6P from STMicroelectronics, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | S | input | Chip select: the device is selected when S is driven low, and a falling edge is required on S after power-up before any instruction can start. |
| 2 | Q | output | Serial data output; DC output current is limited to 5 mA (IOL with Q = 0 and IOH with Q = 1) per the absolute maximum ratings. |
| 3 | W | input | Write protect input, used together with the status register protection bits to control write access to the memory. |
| 4 | VSS | power_in | Ground reference for the device. |
| 5 | D | input | Serial data input, used to shift instructions, addresses and data into the device on the SPI bus. |
| 6 | C | input | Serial clock for the SPI bus; the high-speed clock is specified up to 20 MHz. |
| 7 | HOLD | input | Hold input: communications with the device can be interrupted while HOLD is driven low. |
| 8 | VCC | power_in | Supply voltage; the M95128-R operates from 1.8 V to 5.5 V over -40 °C to +85 °C (Table 10). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOIC-8 |
| Category | Memory |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
M95128-RMN6P - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
m95128-rmn6p-etched.step/m95128-rmn6p-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);m95128-rmn6p.step/m95128-rmn6p.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (48 pp, sha256
b42ce2bd4117758a, retrieved 2026-10-10, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).