AP7332-3333W6-7
Public Unreviewedby Ray
Diodes Incorporated Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-26. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Symbol & Footprint
Schematic Symbol
Open full view ↗PCB Footprint
Open full view ↗Datasheet
Open in new tab ↗Contents
README
markdownAP7332-3333W6-7
Diodes Incorporated · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-26
AP7332-3333W6-7 from Diodes Incorporated, in a SOT-26. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT2 | power_out | Regulated voltage output for channel 2 (3.3V, 300mA). Bypass to ground through a 1µF ceramic capacitor for stability. |
| 2 | GND | power_in | Device ground reference. Shared return for both regulator channels and internal control circuitry. |
| 3 | EN2 | input | Enable input for channel 2, active high. VIH ≥ 1.4V turns OUT2 on; VIL ≤ 0.4V places channel 2 in shutdown. Input current ±1µA max. |
| 4 | EN1 | input | Enable input for channel 1, active high. VIH ≥ 1.4V turns OUT1 on; VIL ≤ 0.4V places channel 1 in shutdown. Input current ±1µA max. |
| 5 | IN | power_in | Unregulated voltage input, 2V to 6V operating range (6.5V absolute max). Supplies both regulator channels. Bypass to ground through at least a 1µF ceramic capacitor. |
| 6 | OUT1 | power_out | Regulated voltage output for channel 1 (3.3V, 300mA). Bypass to ground through a 1µF ceramic capacitor for stability. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-26 |
| Category | PMIC |
| Pins | 6 |
Ordering variants
AP7332-3333W6-7
CAD (KiCad official)
- Symbol:
AP7332-3333W6-7 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-26 (KiCad packages3D, STEP)
3D model downloads
Two STEP files. Same geometry, different body top:
| File | Size | Use it when |
|---|---|---|
ap7332-3333w6-7.step |
97 KB | You want the bare part, or you mark your own boards. |
ap7332-3333w6-7-etched.step |
3.0 MB | You want the part with AP7332-3333W6-7 already on it. |
The marking in the etched file is real recessed geometry cut into the solid, not a texture or a decal: 704 faces against 117 in the bare model. It survives export, section views, and rendering in any CAD tool, and it drops straight into KiCad or Fusion with no extra setup.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (18 pp, sha256
136d4a90eee58602, retrieved 2026-08-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).