Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM22677TJ-5.0

Texas Instruments · DC-DC Converters · TO-263-7

LM22677TJ-5.0 from Texas Instruments, in a TO-263-7. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SW output Switching output of the regulator.
2 VIN power_in Supply input to the regulator; the recommended VIN supply range is 4.5 V to 42 V.
3 BOOT input Bootstrap input that provides the gate voltage for the high-side N-FET.
4 GND power_in Ground input to regulator; system common ground pin.
5 RT/SYNC input Oscillator mode control used to set the switching frequency or synchronize the oscillator; see the Switching Frequency Adjustment and Synchronization section.
6 FB input Feedback input to the regulator.
7 EN input Enable input used to control regulator start-up and shutdown; see the Precision Enable and UVLO section.
8 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TO-263-7
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Feedback Voltage VFB 4.925 5 5.075 V VIN = 8 V to 42 V 5
Feedback Voltage over temperature VFB 4.9 5.1 V VIN = 8 V to 42 V, -40°C ≤ TJ ≤ 125°C 5
Quiescent Current IQ 6 mA VFB = 5 V, -40°C ≤ TJ ≤ 125°C 5
Standby Quiescent Current ISTDBY 25 40 µA EN Pin = 0 V 5
Current Limit ICL 6 7.1 8.4 A 5
Current Limit over temperature ICL 5.75 8.75 A -40°C ≤ TJ ≤ 125°C 5
Output Leakage Current IL 0.2 2 µA VIN = 42 V, EN Pin = 0 V, VSW = 0 V 5
Output Leakage Current (reverse) IL 0.1 3 µA VSW = -1 V 5
Switch On-Resistance RDS(ON) 0.1 0.14 Ω 5
Switch On-Resistance over temperature RDS(ON) 0.2 Ω -40°C ≤ TJ ≤ 125°C 5
Oscillator Frequency fO 400 600 kHz -40°C ≤ TJ ≤ 125°C 5
Oscillator Frequency (nominal) fO 500 kHz 5
Minimum Off-time TOFFMIN 200 ns 5
Minimum Off-time over temperature TOFFMIN 100 300 ns -40°C ≤ TJ ≤ 125°C 5
Enable Threshold Voltage (falling) VEN 1.6 V Falling 5
Enable Threshold Voltage (falling) over temperature VEN 1.3 1.9 V Falling, -40°C ≤ TJ ≤ 125°C 5
Enable Voltage Hysteresis VENHYST 0.6 V 5
Enable Input Current IEN 6 µA EN Input = 0 V 5
Maximum Synchronization Frequency FSYNC 1 MHz VSYNC = 3.5 V, 50% duty-cycle 5
Thermal Shutdown Threshold TSD 150 °C 5
VIN to GND VIN 43 V 4
EN Pin Voltage EN -0.5 6 V 4
RT/SYNC Pin Voltage RT/SYNC -0.5 7 V 4
SW to GND SW -5 V DC voltage; max = VIN; pulse -10 V up to 50 ns 4
BOOT Pin Voltage BOOT 7 V referenced to VSW (VSW + 7 V) 4
FB Pin Voltage FB -0.5 7 V 4
Junction Temperature TJ 150 °C 4
Storage Temperature Tstg -65 150 °C 4
VIN Supply Voltage VIN 4.5 42 V 4
Junction Temperature (operating) TJ -40 125 °C 4
Junction-to-ambient thermal resistance RθJA 22 °C/W package mounted to 1 square inch of copper 4

CAD (KiCad official)

  • Symbol: LM22677TJ-5.0
  • Footprint: Package_TO_SOT_SMD:TO-263-7_TabPin8
  • 3D model: TO-263-7 (KiCad packages3D, STEP)
  • 3D model files: lm22677tj-5-0-etched.step / lm22677tj-5-0-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm22677tj-5-0.step / lm22677tj-5-0.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (31 pp, sha256 8ffab04cc1a854c9, retrieved 2026-10-28, tier: manufacturer)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF