component
FPF2004
Public Made by Adomby adom
onsemi AC-DC Controllers And Regulators, SC-70-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownFPF2004
onsemi · AC-DC Controllers And Regulators · SC-70-5
FPF2004 from onsemi, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | power_out | Output of the power switch, a 0.7 Ω current-limited P-channel MOSFET; VOUT must not be driven above VIN because reverse voltage can cause large currents and permanent damage, and VIN, VOUT, ON and FLAGB are rated −0.3 V to 6 V to GND. |
| 2 | GND | power_in | Ground reference for the device; all voltage ratings (VIN, VOUT, ON, FLAGB) are specified relative to GND. |
| 3 | FLAGB | output | Active-LO open-drain fault output that indicates over-current, supply under-voltage or over-temperature and requires a pull-up resistor between VIN and FLAGB; rated −0.3 V to 6 V to GND. |
| 4 | ON | input | On control input that turns the switch on (Active HI or Active LO depending on the ordering version), with VIL at most 0.5 V at VIN = 1.8 V and 0.9 V at VIN = 5.5 V, VIH at least 0.8 V at 1.8 V and 1.5 V at 5.5 V, and an absolute maximum of 6 V to GND. |
| 5 | VIN | power_in | Input to the power switch and the supply voltage for the IC, specified for 1.8 V to 5.5 V operation with an absolute maximum of 6 V to GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SC-70-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
CAD (KiCad official)
- Symbol:
FPF2004 - Footprint:
Package_TO_SOT_SMD:SOT-353_SC-70-5 - 3D model: SC-70-5 (KiCad packages3D, STEP)
- 3D model files:
fpf2004-etched.step/fpf2004-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);fpf2004.step/fpf2004.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (12 pp, sha256
620e278c1043178d, retrieved 2026-10-09, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).