Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM5163HQDDARQ1

Texas Instruments · DC-DC Converters · SO-8

LM5163HQDDARQ1 from Texas Instruments, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground connection for internal circuits.
2 VIN power_in Regulator supply input pin to high-side power MOSFET and internal bias regulator; connect directly to input supply with short, low impedance paths.
3 EN/UVLO input Precision enable and undervoltage lockout programming pin with converter shutdown below 1.1V, standby mode between 1.1V and 1.5V, and startup sequence initiation above 1.5V.
4 RON input On-time programming pin where external resistor to GND sets the buck switch on-time.
5 FB input Feedback input of voltage regulation comparator.
6 PGOOD output Open-drain power good indicator output pin requiring external pullup resistor between 10kΩ and 100kΩ to source voltage.
7 BST power_in Bootstrap gate-drive supply pin requiring 2.2nF 50V X7R ceramic capacitor between BST and SW to bias internal high-side gate driver.
8 SW power_out Switching node internally connected to high-side NMOS buck switch source and low-side NMOS synchronous rectifier drain, connecting to power inductor switching node.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SO-8
Category Power Management (PMIC)
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input voltage VIN to GND -0.3 100 V 4
EN to GND -0.3 100 V 4
FB to GND -0.3 5.5 V 4
RON to GND -0.3 5.5 V 4
Bootstrap capacitor, external BST to SW capacitance 1.5 2.5 nF 4
BST to GND -0.3 105.5 V 4
BST to SW -0.3 5.5 V 4
SW to GND -1.5 100 V 4
SW to GND (20-ns transient) -3 V 20-ns transient 4
PGOOD to GND -0.3 14 V 4
Operating junction temperature TJ -40 165 °C 4
Storage temperature Tstg -65 150 °C 4
VIN input voltage VIN 6 100 V 4
Switch node voltage VSW 100 V 4
Enable voltage VEN/UVLO 100 V 4
Switching frequency FSW 1000 kHz 4
Programmable on-time tON 50 10000 ns 4
Enable threshold rising VEN-RISING 1.45 1.5 1.55 V VEN/UVLO rising 5
Enable threshold falling VEN-FALLING 1.35 1.4 1.44 V VEN/UVLO falling 5
FB regulation voltage VREF 1.181 1.2 1.218 V VFB falling 5
FB upper threshold for PGOOD high to low VPG-UTH 1.105 1.14 1.175 V VFB rising 5
FB lower threshold for PGOOD high to low VPG-LTH 1.055 1.08 1.1 V VFB falling 5
Gate drive UVLO VBST-UV 2.7 3.4 V VBST rising 5
Internal soft-start time tSS 1.75 3 4.75 ms 6
Peak current limit threshold (HS) IPEAK1 0.63 0.75 0.87 A 6
Peak current limit threshold (LS) IPEAK2 0.63 0.75 0.87 A 6
Valley current limit threshold IVALLEY 0.5 0.6 0.72 A 6
CBST external BST to SW capacitance CBST 2.2 nF 4
VIN shutdown current IQ-SHUTDOWN 3 µA VEN = 0 V 5
VIN sleep current IQ-SLEEP1 10.5 µA VEN = 2.5 V, VFB = 1.5 V 5
VIN active current IQ-ACTIVE 600 µA VEN = 2.5 V 5
Shutdown threshold rising VSD-RISING 1.1 V VEN/UVLO rising 5
Shutdown threshold falling VSD-FALLING 0.45 V VEN/UVLO falling 5
PGOOD upper and lower threshold hysteresis VPG-HYS 60 mV VFB falling 5
On-time1 tON1 5000 ns VVIN = 6 V, RRON = 75 kΩ 5
On-time2 tON2 1650 ns VVIN = 6 V, RRON = 25 kΩ 5
On-time3 tON3 2550 ns VVIN = 12 V, RRON = 75 kΩ 5
On-time4 tON4 830 ns VVIN = 12 V, RRON = 25 kΩ 5
PGOOD pulldown resistance RPG 30 Ω VFB = 1 V 5
High-side MOSFET RDSON RDSON-HS 0.725 Ω ISW = –100 mA 5
Low-side MOSFET RDSON RDSON-LS 0.33 Ω ISW = 100 mA 5
Min of (IPEAK1 or IPEAK2) minus IVALLEY IDELTA-ILIM 100 mA 6
Thermal shutdown threshold TSD 175 °C TJ rising 6
Thermal shutdown hysteresis TSD-HYS 10 °C 6
Junction-to-ambient thermal resistance RθJA 43.4 °C/W 5
Junction-to-case (top) thermal resistance RθJC(top) 59.5 °C/W 5
Junction-to-board thermal resistance RθJB 16.1 °C/W 5
Junction-to-top characterization parameter ΨJT 4 °C/W 5
Junction-to-board characterization parameter ΨJB 16.3 °C/W 5
Junction-to-case (bottom) thermal resistance RθJC(bot) 3.9 °C/W 5

CAD (KiCad official)

  • Symbol: LM5163HQDDARQ1
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SO-8 (KiCad packages3D, STEP)
  • 3D model files: lm5163hqddarq1-etched.step / lm5163hqddarq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm5163hqddarq1.step / lm5163hqddarq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (36 pp, sha256 af92c1259e2d7425, retrieved 2026-10-05, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF