Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM239AQDRQ1

Texas Instruments · Comparators · SOIC-14

LM239AQDRQ1 from Texas Instruments, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1OUT output Output of comparator 1; open-collector, with 36 V maximum output voltage and 20 mA maximum output current, and may be wired-AND with other open-collector outputs.
2 2OUT output Output of comparator 2; open-collector, with 36 V maximum output voltage and 20 mA maximum output current, and may be wired-AND with other open-collector outputs.
3 VCC power_in Positive supply pin; single supply 2 V to 36 V or dual supplies with a 2 V to 36 V difference, with VCC at least 1.5 V more positive than the input common-mode voltage.
4 2IN− input Inverting input of comparator 2; differential input voltage range equals the maximum-rated supply voltage (±36 V).
5 2IN+ input Non-inverting input of comparator 2; common-mode input voltage range includes ground.
6 1IN− input Inverting input of comparator 1; differential input voltage range equals the maximum-rated supply voltage (±36 V).
7 1IN+ input Non-inverting input of comparator 1; common-mode input voltage range includes ground.
8 3IN− input Inverting input of comparator 3; differential input voltage range equals the maximum-rated supply voltage (±36 V).
9 3IN+ input Non-inverting input of comparator 3; common-mode input voltage range includes ground.
10 4IN− input Inverting input of comparator 4; differential input voltage range equals the maximum-rated supply voltage (±36 V).
11 4IN+ input Non-inverting input of comparator 4; common-mode input voltage range includes ground.
12 GND power_in Ground (network ground) reference pin; all voltages except differential voltages are referenced to this pin.
13 OUT4 output Output of comparator 4; open-collector, with 36 V maximum output voltage and 20 mA maximum output current, and may be wired-AND with other open-collector outputs.
14 OUT3 output Output of comparator 3; open-collector, with 36 V maximum output voltage and 20 mA maximum output current, and may be wired-AND with other open-collector outputs.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-14
Category Operational Amplifier/Comparator
Pins 14

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage, 25°C VIO 1 2.5 mV TA = 25°C; VCC = 5 V to 30 V, VIC = VICR(min), VO = 1.4 V 3
Input offset voltage, full range (-40°C to 125°C) VIO 5.5 mV VCC = 5 V to 30 V, VIC = VICR(min), VO = 1.4 V 3
Input offset current, 25°C IIO 5 50 nA TA = 25°C; VO = 1.4 V 3
Input offset current, full range (-40°C to 125°C) IIO 150 nA VO = 1.4 V 3
Input bias current, 25°C IIB -25 -250 nA TA = 25°C; VO = 1.4 V 3
Input bias current, full range (-40°C to 125°C) IIB -400 nA VO = 1.4 V 3
Common-mode input voltage range, 25°C (min) VICR 0 V TA = 25°C; max printed as VCC−1.5 V 3
Common-mode input voltage range, full range (min) VICR 0 V Full range; max printed as VCC−2 V 3
Large-signal differential voltage amplification, 25°C AVD 50 200 V/mV TA = 25°C; VCC = 15 V, VO = 1.4 V to 11.4 V, RL ≥ 15 kΩ to VCC 3
High-level output current, 25°C IOH 0.1 50 nA TA = 25°C; VOH = 5 V, VID = 1 V 3
High-level output current, full range (-40°C to 125°C) IOH 1 µA VID = 1 V, VOH = 30 V 3
Low-level output voltage, 25°C VOL 150 400 mV TA = 25°C; VID = −1 V, IOL = 4 mA 3
Low-level output voltage, full range (-40°C to 125°C) VOL 700 mV VID = −1 V, IOL = 4 mA 3
Low-level output current, 25°C IOL 6 16 mA TA = 25°C; VID = −1 V, VOL = 1.5 V 3
Supply voltage VCC 36 V See Note 1 2
Differential input voltage VID -36 36 V See Note 2 2
Input voltage range (either input) VI -0.3 36 V 2
Output voltage VO 36 V 2
Output current IO 20 mA 2
Lead temperature 260 °C 1,6 mm (1/16 inch) from case for 10 seconds 2
Maximum operating junction temperature TJ 136 °C 2
Storage temperature range Tstg -65 150 °C 2
Package thermal impedance θJA 86 °C/W Calculated per JESD 51-7 (see Note 4) 2
Operating free-air temperature range TA -40 125 °C Ordering information, LM239AQ (TA range) 1
Supply voltage operating range 2 36 V Features list: single supply, or dual supplies with difference 2 V to 36 V 1

CAD (KiCad official)

  • Symbol: LM239AQDRQ1
  • Footprint: Package_SO:SOIC-14_3.9x8.7mm_P1.27mm
  • 3D model: SOIC-14 (KiCad packages3D, STEP)
  • 3D model files: lm239aqdrq1-etched.step / lm239aqdrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm239aqdrq1.step / lm239aqdrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (11 pp, sha256 4f86d07ba45738af, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF