3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownHMC443LP4ETR
Analog Devices · RF Misc ICs and Modules · QFN-24-EP(4x4)
HMC443LP4ETR from Analog Devices, in a QFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | N/C | unconnected | Not connected internally; the datasheet measurements were taken with this pin connected to RF/DC ground externally. |
| 2 | N/C | unconnected | Not connected internally; the datasheet measurements were taken with this pin connected to RF/DC ground externally. |
| 3 | RFIN | input | RF input needs to be DC blocked only if there is an external DC voltage applied to RF IN. |
| 4 | GND | power_in | All ground leads and the ground paddle must be soldered to PCB RF/DC ground. |
| 5 | N/C | unconnected | Not connected internally; the datasheet measurements were taken with this pin connected to RF/DC ground externally. |
| 6 | N/C | unconnected | Not connected internally; the datasheet measurements were taken with this pin connected to RF/DC ground externally. |
| 7 | N/C | unconnected | Not connected internally; the datasheet measurements were taken with this pin connected to RF/DC ground externally. |
| 8 | N/C | unconnected | Not connected internally; the datasheet measurements were taken with this pin connected to RF/DC ground externally. |
| 9 | N/C | unconnected | Not connected internally; the datasheet measurements were taken with this pin connected to RF/DC ground externally. |
| 10 | N/C | unconnected | Not connected internally; the datasheet measurements were taken with this pin connected to RF/DC ground externally. |
| 11 | N/C | unconnected | Not connected internally; the datasheet measurements were taken with this pin connected to RF/DC ground externally. |
| 12 | N/C | unconnected | Not connected internally; the datasheet measurements were taken with this pin connected to RF/DC ground externally. |
| 13 | N/C | unconnected | Not connected internally; the datasheet measurements were taken with this pin connected to RF/DC ground externally. |
| 14 | N/C | unconnected | Not connected internally; the datasheet measurements were taken with this pin connected to RF/DC ground externally. |
| 15 | GND | power_in | All ground leads and the ground paddle must be soldered to PCB RF/DC ground. |
| 16 | RFOUT | output | Multiplied RF output that is AC coupled, so no external DC blocks are necessary. |
| 17 | N/C | unconnected | Not connected internally; the datasheet measurements were taken with this pin connected to RF/DC ground externally. |
| 18 | N/C | unconnected | Not connected internally; the datasheet measurements were taken with this pin connected to RF/DC ground externally. |
| 19 | Vcc | power_in | Supply voltage of 5V ± 0.5V. |
| 20 | N/C | unconnected | Not connected internally; the datasheet measurements were taken with this pin connected to RF/DC ground externally. |
| 21 | N/C | unconnected | Not connected internally; the datasheet measurements were taken with this pin connected to RF/DC ground externally. |
| 22 | N/C | unconnected | Not connected internally; the datasheet measurements were taken with this pin connected to RF/DC ground externally. |
| 23 | N/C | unconnected | Not connected internally; the datasheet measurements were taken with this pin connected to RF/DC ground externally. |
| 24 | N/C | unconnected | Not connected internally; the datasheet measurements were taken with this pin connected to RF/DC ground externally. |
| 25 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | QFN-24-EP(4x4) |
| Category | RF & Radio |
| Pins | 25 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Frequency Range, Input | 2.45 | 2.8 | GHz | 1 | |||
| Frequency Range, Output | 9.8 | 11.2 | GHz | 1 | |||
| Input Power Range | -15 | 5 | dBm | 1 | |||
| Supply Current (Icc) | Icc | 52 | 69 | mA | TA = +25 °C, Vcc = 5V | 1 | |
| RF Input power (Vcc = +5V) | 20 | dBm | Vcc = +5V | 4 | |||
| Vcc supply voltage | Vcc | 5.5 | V | 4 | |||
| Channel Temperature | 135 | °C | 4 | ||||
| Continuous Pdiss | Pdiss | 500 | mW | T=85 °C, derate 7.6 mW/°C above 85 °C | 4 | ||
| Storage Temperature | -65 | 150 | °C | 4 | |||
| Operating Temperature | -40 | 85 | °C | 4 | |||
| Thermal Resistance (Rth) | Rth | 130.8 | °C/W | junction to ground paddle | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | Part Number Package Body Material Lead Finish MSL Rating Package Marking [3] HMC443LP4 Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 [1] H443 | 4 |
CAD (KiCad official)
- Symbol:
HMC443LP4ETR - Footprint:
Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm - 3D model: QFN-24-EP(4x4) (KiCad packages3D, STEP)
- 3D model files:
hmc443lp4etr-etched.step/hmc443lp4etr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);hmc443lp4etr.step/hmc443lp4etr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (6 pp, sha256
416c0afbdb265d6c, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).