Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

INA296B3IDDFR

TEXAS INSTRUMENTS · Global Sourcing Parts · SOT-23-8

INA296B3IDDFR from TEXAS INSTRUMENTS, in a SOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 IN- input Current-sense amplifier negative input, connected to the load side of the sense resistor in high-side applications and the ground side in low-side applications, with a common-mode range of −5 V to 110 V.
2 GND power_in Ground reference for the device.
3 REF2 input Reference 2 voltage input, to be connected to a potential between 0 V and VS.
4 NC unconnected Reserved pin that must be connected to ground.
5 OUT output Output voltage of the current-sense amplifier, which swings between ground and the supply rail within the specified headroom (about 20 mV to 200 mV from VS).
6 VS power_in Power supply input, operating from 2.7 V to 20 V.
7 REF1 input Reference 1 voltage input, to be connected to a potential between 0 V and VS.
8 IN+ input Current-sense amplifier positive input, connected to the bus-voltage side of the sense resistor in high-side applications and the load side in low-side applications, with a common-mode range of −5 V to 110 V.

Key specifications

Parameter Value
Manufacturer TEXAS INSTRUMENTS
Package SOT-23-8
Category Global Sourcing Parts
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Common-mode input range VCM -5 110 V VIN+, VIN- = -5V to 110V, VSENSE = 0mV, TA = -40°C to 125°C 5
Common-mode rejection ratio, input-referred (INA296B) CMRR 120 130 dB VIN+, VIN- = -5V to 110V, VSENSE = 0mV, TA = -40°C to 125°C, INA296B 5
Offset voltage, input-referred (INA296B) Vos -150 25 150 µV VSENSE = 0mV, INA296B 5
Offset voltage drift, input-referred (INA296B) dVos/dT -500 100 500 nV/°C TA = -40°C to 125°C, INA296B 5
Power-supply rejection ratio, input-referred (INA296B) PSRR -10 1 10 µV/V VS = 2.7V to 20V, VSENSE = 0mV, VREF1 = VREF2 = 1V, TA = -40°C to 125°C, INA296B 5
Input bias current IB 25 35 45 µA IB+, IB-, VSENSE=0mV 5
Reference input range 0 V 0 to VS 5
Gain error (INA296B) GERR -0.1 0.02 0.1 % (GND + 50mV) < VOUT < (VS - 200mV), INA296B 6
Gain error drift (INA296B) -5 0.2 5 ppm/°C TA = -40°C to +125°C, INA296B 6
Swing to VS power supply rail -0.07 -0.2 V Printed VS − 0.07 (typ), VS − 0.2 (max); RL = 10kΩ to GND, TA = -40°C to +125°C 6
Swing to ground 8 20 mV RL = 10kΩ to GND, VSENSE = 0mV, VREF1 = VREF2 = 0V, TA = -40°C to +125°C 6
Reference voltage rejection ratio, input-referred (INA296B) RVRR -20 10 20 µV/V VREF1 = VREF2 = 0.5V to 4.5V, TA = -40°C to +125°C, INA296B 6
Reference divider accuracy (INA296B) -0.15 0.02 0.15 % VOUT = /(VREF1 + VREF2)/ / 2 at VSENSE = 0mV, VREF1 = VS, VREF2 = GND or VREF1 = GND, VREF2 = VS, TA = -40°C to +125°C, INA296B 6
Supply voltage VS 2.7 20 V 7
Quiescent current IQ 2.5 3 mA VSENSE = 0mV 7
Quiescent current, over temperature IQ 3.2 mA VSENSE = 0mV, TA = -40°C to +125°C 7
Specified temperature range TA -40 125 °C 7
Supply voltage (absolute maximum) VS 22 V 4
Differential analog input voltage VIN+ − VIN− -30 30 V (VIN+) − (VIN-) 4
Common-mode analog input voltage -20 120 V Common-mode 4
Operating temperature (absolute maximum) TA -55 150 °C 4
Junction temperature TJ 150 °C 4
Storage temperature Tstg -65 150 °C 4
ESD HBM V(ESD) -2000 2000 V Human body model, ANSI/ESDA/JEDEC JS-001, all pins 4
ESD CDM V(ESD) -1000 1000 V Charged device model, ANSI/ESDA/JEDEC JS-002, all pins 4
Common-mode input range (recommended) VCM -5 48 110 V 4
Operating supply range VS 2.7 5 20 V 4
Ambient temperature TA -40 125 °C 4
Junction-to-ambient thermal resistance RθJA 129.7 °C/W DDF (SOT23) 4
Junction-to-case (top) thermal resistance RθJC(top) 58 °C/W DDF (SOT23) 4
Junction-to-board thermal resistance RθJB 52.6 °C/W DDF (SOT23) 4
Junction-to-top characterization parameter ΨJT 2.3 °C/W DDF (SOT23) 4
Junction-to-board characterization parameter ΨJB 52.3 °C/W DDF (SOT23) 4
CMRR at 50kHz CMRR 105 dB f = 50kHz 5
Gain G 50 V/V A3, B3 Devices 5
Non-linearity error 0.001 % 6
Maximum capacitive load 1 nF No sustained oscillations, No isolation resistor 6
Bandwidth BW 1.1 MHz All Gains, −3dB Bandwidth 6
Settling time to 0.5% 1.5 µs VIN+, VIN- = 48V, VOUT = 0.5V to 4.5V, Output settles to 0.5% 6
Settling time to 1% 1 µs VIN+, VIN- = 48V, VOUT = 0.5V to 4.5V, Output settles to 1% 6
Settling time to 5% 0.5 µs VIN+, VIN- = 48V, VOUT = 0.5V to 4.5V, Output settles to 5% 6
Slew rate SR 8 V/µs Rising 6
Voltage noise density 39 nV/√Hz A3, B3 Devices 7

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: INA296B3IDDFR
  • Footprint: Package_TO_SOT_SMD:SOT-23-8
  • 3D model: SOT-23-8, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.1 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: ina296b3iddfr-etched.step / ina296b3iddfr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina296b3iddfr.step / ina296b3iddfr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: TEXAS INSTRUMENTS datasheet (43 pp, sha256 a811e78481cbe850, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF