Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

24FC1025T-I/SN

Microchip Tech · EEPROM · SOIC-8

24FC1025T-I from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 A0 input User-configurable chip select input whose level is compared with the A0 bit of the slave address; it must be driven to logic 0 or 1 before normal device operation can proceed.
2 A1 input User-configurable chip select input whose level is compared with the A1 bit of the slave address; it must be driven to logic 0 or 1 before normal device operation can proceed.
3 A2 input Non-configurable chip select input that must be hard-wired to VCC; if left floating or tied to VSS, device operation will be undefined.
4 VSS power_in Ground reference for the device.
5 SDA bidirectional Open-drain serial data pin requiring a pull-up resistor to VCC (typical 10 kΩ for 100 kHz, 2 kΩ for 400 kHz and 1 MHz), with data allowed to change only while SCL is low except for Start and Stop conditions.
6 SCL input Serial clock input used to synchronize data transfer to and from the device.
7 WP input Write-protect input that must be tied to VSS to enable write operations or to VCC to inhibit write operations, with read operations unaffected.
8 VCC power_in Supply voltage; for the 24FC1025 the stated range is +1.8 to 5.5V.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-8
Category Memory
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
All inputs and outputs w.r.t. VSS -0.6 V 2
Storage temperature -65 °C 2
Storage temperature 150 °C 2
Ambient temperature with power applied -40 °C 2
Ambient temperature with power applied 125 °C 2
Supply voltage (24FC1025) VCC 1.8 5.5 V 24FC1025 (Device Selection Table) 1
Ambient temperature, Industrial TA -40 85 °C Industrial (I) 1
High-level input voltage (0.7 VCC) VIH 0.7 V A1, A2, SCL, SDA and WP pins 2
Low-level input voltage (0.3 VCC) VIL 0.3 V VCC ≥ 2.5V 2
Low-level input voltage (0.2 VCC) VIL 0.2 V VCC < 2.5V 2
Hysteresis of Schmitt trigger inputs (0.05 VCC) VHYS 0.05 V VCC ≥ 2.5V (Note) 2
Low-level output voltage VOL 0.4 V IOL = 3.0 mA @ VCC = 4.5V 2
Input leakage current ILI -1 µA VIN = VSS or VCC 2
Input leakage current ILI 1 µA VIN = VSS or VCC 2
Output leakage current ILO -1 µA VOUT = VSS or VCC 2
Output leakage current ILO 1 µA VOUT = VSS or VCC 2
Pin capacitance (all inputs/outputs) CIN, COUT 10 pF VCC = 5.0V (Note); TA = 25°C, FCLK = 1 MHz 2
Read operating current ICC 450 µA VCC = 5.5V, SCL = 400 kHz 2
Write operating current ICC 5 mA VCC = 5.5V 2
Standby current ICCS 5 µA SCL, SDA, VCC = 5.5V; A1, A2, WP = VSS 2
Clock frequency FCLK 400 kHz 1.8V ≤ VCC ≤ 2.5V (24FC1025 only) 3
Clock frequency FCLK 1000 kHz 2.5V ≤ VCC ≤ 5.5V (24FC1025 only) 3
Clock high time THIGH 600 ns 1.8V ≤ VCC ≤ 2.5V (24FC1025 only) 3
Clock high time THIGH 500 ns 2.5V ≤ VCC ≤ 5.5V (24FC1025 only) 3
Clock low time TLOW 1300 ns 1.8V ≤ VCC ≤ 2.5V (24FC1025 only) 3
Clock low time TLOW 500 ns 2.5V ≤ VCC ≤ 5.5V (24FC1025 only) 3
SDA and SCL rise time TR 300 ns 1.8V ≤ VCC ≤ 2.5V (24FC1025 only) 3
SDA and SCL fall time TF 100 ns 1.8V ≤ VCC ≤ 5.5V (24FC1025 only) 3
Start condition hold time THD:STA 600 ns 1.8V ≤ VCC ≤ 2.5V (24FC1025 only) 3
Start condition hold time THD:STA 250 ns 2.5V ≤ VCC ≤ 5.5V (24FC1025 only) 3
Start condition setup time TSU:STA 600 ns 1.8V ≤ VCC ≤ 2.5V (24FC1025 only) 3
Start condition setup time TSU:STA 250 ns 2.5V ≤ VCC ≤ 5.5V (24FC1025 only) 3
Data input hold time THD:DAT 0 ns (Note 2) 3
Data input setup time TSU:DAT 100 ns 1.8V ≤ VCC ≤ 2.5V (24FC1025 only) 3
Stop condition setup time TSU:STO 600 ns 1.8V ≤ VCC ≤ 2.5V (24FC1025 only) 3
Stop condition setup time TSU:STO 250 ns 2.5V ≤ VCC ≤ 5.5V (24FC1025 only) 3
WP setup time TSU:WP 600 ns 1.8V ≤ VCC ≤ 2.5V (24FC1025 only) 4
WP hold time THD:WP 1300 ns 1.8V ≤ VCC ≤ 2.5V (24FC1025 only) 4
Output valid from clock TAA 900 ns 1.8V ≤ VCC ≤ 2.5V (24FC1025 only) 4
Output valid from clock TAA 400 ns 2.5V ≤ VCC ≤ 5.5V (24FC1025 only) 4
Bus free time TBUF 1300 ns 1.8V ≤ VCC ≤ 2.5V (24FC1025 only) 4
Bus free time TBUF 500 ns 2.5V ≤ VCC ≤ 5.5V (24FC1025 only) 4
Write cycle time (byte or page) TWC 5 ms 4
Endurance 1e+06 cycles Page mode, 25°C, VCC = 5.5V (Note 4) 4

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin SM = Plastic SOIJ (5.28 mm Body), 8-lead SN = Plastic SOIC (3.90 mm Body), 8-lead 25

CAD (KiCad official)

  • Symbol: 24FC1025T-I
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: 24fc1025t-i-etched.step / 24fc1025t-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); 24fc1025t-i.step / 24fc1025t-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (28 pp, sha256 912f93f6c367e2e0, retrieved 2026-11-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

Other parts in this family

This page is 24FC1025T-I/SN. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:

  • 24FC1025T-I/SM