3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLT1762EMS8-5#TRPBF
Analog Devices · Linear Voltage Regulators (LDO) · MSOP-8
LT1762EMS8-5#TRPBF from Analog Devices, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | power_out | Regulated output that supplies the load and requires a minimum 2.2µF output capacitor to prevent oscillations. |
| 2 | SENSE | input | Output sense input to the error amplifier on the fixed-voltage LT1762-5, connected to OUT (or to the load for Kelvin sensing), with 10µA bias current at the nominal output voltage. |
| 3 | BYP | passive | Reference bypass pin, clamped internally to ±0.6V, where a capacitor of up to 0.01µF from OUT lowers noise to 20µVRMS typical; leave unconnected if not used. |
| 4 | GND | power_in | Ground. |
| 5 | SHDN | input | Shutdown input that turns the output off when pulled low; connect to VIN if unused, since the device is in shutdown if the pin is left unconnected. |
| 6 | NC | unconnected | No connect pin. |
| 7 | NC | unconnected | No connect pin. |
| 8 | IN | power_in | Input supply pin, rated ±20V maximum, that tolerates reverse voltage and may need a 1µF to 10µF bypass capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | MSOP-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Regulated Output Voltage | VOUT | 4.95 | 5 | 5.05 | V | LT1762-5, VIN = 5.5V, ILOAD = 1mA | 3 |
| Regulated Output Voltage (full temp) | VOUT | 4.875 | 5 | 5.125 | V | LT1762-5, 6V < VIN < 20V, 1mA < ILOAD < 150mA, over temperature | 3 |
| Line Regulation | 1 | 5 | mV | LT1762-5, ΔVIN = 5.5V to 20V, ILOAD = 1mA, over temperature | 3 | ||
| Load Regulation | 9 | 25 | mV | LT1762-5, VIN = 6V, ΔILOAD = 1mA to 150mA | 3 | ||
| Load Regulation (full temp) | 50 | mV | LT1762-5, VIN = 6V, ΔILOAD = 1mA to 150mA, over temperature | 3 | |||
| Minimum Operating Voltage | 1.8 | 2.3 | V | ILOAD = 150mA, over temperature | 3 | ||
| Dropout Voltage | 0.09 | 0.15 | V | ILOAD = 1mA, VIN = VOUT(NOMINAL) | 3 | ||
| Dropout Voltage (full temp) | 0.19 | V | ILOAD = 1mA, over temperature | 3 | |||
| Dropout Voltage | 0.15 | 0.21 | V | ILOAD = 10mA, VIN = VOUT(NOMINAL) | 3 | ||
| Dropout Voltage (full temp) | 0.25 | V | ILOAD = 10mA, over temperature | 3 | |||
| Dropout Voltage | 0.21 | 0.27 | V | ILOAD = 50mA, VIN = VOUT(NOMINAL) | 3 | ||
| Dropout Voltage (full temp) | 0.31 | V | ILOAD = 50mA, over temperature | 3 | |||
| Dropout Voltage | 0.27 | 0.33 | V | ILOAD = 150mA, VIN = VOUT(NOMINAL) | 3 | ||
| Dropout Voltage (full temp) | 0.4 | V | ILOAD = 150mA, over temperature | 3 | |||
| GND Pin Current | 25 | 65 | µA | ILOAD = 0mA, VIN = VOUT(NOMINAL), over temperature | 3 | ||
| GND Pin Current | 70 | 120 | µA | ILOAD = 1mA, VIN = VOUT(NOMINAL), over temperature | 3 | ||
| GND Pin Current | 350 | 500 | µA | ILOAD = 10mA, VIN = VOUT(NOMINAL), over temperature | 3 | ||
| GND Pin Current | 1.3 | 1.8 | mA | ILOAD = 50mA, VIN = VOUT(NOMINAL), over temperature | 3 | ||
| GND Pin Current | 4 | 7 | mA | ILOAD = 150mA, VIN = VOUT(NOMINAL), over temperature | 3 | ||
| Shutdown Threshold (Off to On) | 0.8 | 2 | V | VOUT = Off to On, over temperature | 4 | ||
| Shutdown Threshold (On to Off) | 0.25 | 0.65 | V | VOUT = On to Off, over temperature | 4 | ||
| SHDN Pin Current | 1 | µA | VSHDN = 20V | 4 | |||
| Quiescent Current in Shutdown | 0.1 | 1 | µA | VIN = 6V, VSHDN = 0V | 4 | ||
| Ripple Rejection | 50 | 65 | dB | VIN, VOUT = 1V (Avg), VRIPPLE = 0.5VP-P, fRIPPLE = 120Hz, ILOAD = 150mA | 4 | ||
| Current Limit | 160 | mA | VIN = VOUT(NOMINAL) + 1V, ΔVOUT = -0.1V, over temperature | 4 | |||
| Input Reverse Leakage Current | 1 | mA | VIN = -20V, VOUT = 0V, over temperature | 4 | |||
| Reverse Output Current | 10 | 20 | µA | LT1762-5, VOUT = 5V, VIN < 5V | 4 | ||
| Current Limit (short circuit) | 400 | mA | VIN = 7V, VOUT = 0V | 4 | |||
| Output Voltage Noise | 20 | µVRMS | COUT = 10µF, CBYP = 0.01µF, ILOAD = 150mA, BW = 10Hz to 100kHz | 4 | |||
| IN Pin Voltage | -20 | 20 | V | 2 | |||
| OUT Pin Voltage | -20 | 20 | V | 2 | |||
| Input to Output Differential Voltage | -20 | 20 | V | 2 | |||
| SENSE Pin Voltage | -20 | 20 | V | 2 | |||
| BYP Pin Voltage | -0.6 | 0.6 | V | 2 | |||
| SHDN Pin Voltage | -20 | 20 | V | 2 | |||
| Operating Junction Temperature Range | -40 | 125 | °C | Note 2 | 2 | ||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Maximum Junction Temperature | TJMAX | 150 | °C | MS8 package | 2 | ||
| Thermal Resistance Junction-to-Ambient | θJA | 125 | °C/W | MS8 package | 2 |
CAD (KiCad official)
- Symbol:
LT1762EMS8-5#TRPBF - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
lt1762ems8-5-trpbf-etched.step/lt1762ems8-5-trpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt1762ems8-5-trpbf.step/lt1762ems8-5-trpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (18 pp, sha256
74e2ca01c993d790, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).