3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSN74AC139PWRQ1
Texas Instruments · Signal Switches, Multiplexers, Decoders · TSSOP-16
SN74AC139PWRQ1 from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1G | input | Channel 1 output strobe, active low; when G is HIGH all Channel 1 outputs are forced high. |
| 2 | 1A0 | input | Channel 1 address select 0 input that selects which Channel 1 output goes low. |
| 3 | 1A1 | input | Channel 1 address select 1 input that selects which Channel 1 output goes low. |
| 4 | 1Y0 | output | Channel 1 decoder output 0, low when selected and strobe is enabled. |
| 5 | 1Y1 | output | Channel 1 decoder output 1, low when selected and strobe is enabled. |
| 6 | 1Y2 | output | Channel 1 decoder output 2, low when selected and strobe is enabled. |
| 7 | 1Y3 | output | Channel 1 decoder output 3, low when selected and strobe is enabled. |
| 8 | GND | power_in | Ground reference for the device. |
| 9 | 2Y3 | output | Channel 2 decoder output 3, low when selected and strobe is enabled. |
| 10 | 2Y2 | output | Channel 2 decoder output 2, low when selected and strobe is enabled. |
| 11 | 2Y1 | output | Channel 2 decoder output 1, low when selected and strobe is enabled. |
| 12 | 2Y0 | output | Channel 2 decoder output 0, low when selected and strobe is enabled. |
| 13 | 2A1 | input | Channel 2 address select 1 input that selects which Channel 2 output goes low. |
| 14 | 2A0 | input | Channel 2 address select 0 input that selects which Channel 2 output goes low. |
| 15 | 2G | input | Channel 2 output strobe, active low; when G is HIGH all Channel 2 outputs are forced high. |
| 16 | VCC | power_in | Positive supply; the features list gives a wide operating range of 1.5 V to 6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-16 |
| Category | Logic |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 1.5 | 6 | V | 5 | ||
| High-level input voltage | VIH | 1.2 | V | VCC = 1.5V | 5 | ||
| High-level input voltage | VIH | 1.26 | V | VCC = 1.8V | 5 | ||
| High-level input voltage | VIH | 1.75 | V | VCC = 2.5V | 5 | ||
| High-level input voltage | VIH | 2.1 | V | VCC = 3V | 5 | ||
| High-level input voltage | VIH | 3.15 | V | VCC = 4.5V | 5 | ||
| High-level input voltage | VIH | 3.85 | V | VCC = 5.5V | 5 | ||
| Low-level input voltage | VIL | 0.3 | V | VCC = 1.5V | 5 | ||
| Low-level input voltage | VIL | 0.54 | V | VCC = 1.8V | 5 | ||
| Low-level input voltage | VIL | 0.75 | V | VCC = 2.5V | 5 | ||
| Low-level input voltage | VIL | 0.9 | V | VCC = 3V | 5 | ||
| Low-level input voltage | VIL | 1.35 | V | VCC = 4.5V | 5 | ||
| Low-level input voltage | VIL | 1.65 | V | VCC = 5.5V | 5 | ||
| High-level output current | IOH | -1 | mA | VCC = 1.8V | 5 | ||
| High-level output current | IOH | -2 | mA | VCC = 2.5V | 5 | ||
| High-level output current | IOH | -12 | mA | VCC = 3V | 5 | ||
| High-level output current | IOH | -24 | mA | VCC = 4.5V to 5.5V | 5 | ||
| Low-level output current | IOL | 1 | mA | VCC = 1.8V | 5 | ||
| Low-level output current | IOL | 2 | mA | VCC = 2.5V | 5 | ||
| Low-level output current | IOL | 12 | mA | VCC = 3V | 5 | ||
| Low-level output current | IOL | 24 | mA | VCC = 4.5V to 5.5V | 5 | ||
| Input transition rise or fall rate | Δt/Δv | 50 | ns/V | VCC = 1.5V to 3V | 5 | ||
| Input transition rise or fall rate | Δt/Δv | 20 | ns/V | VCC > 3V | 5 | ||
| Operating free-air temperature | TA | -40 | 125 | °C | 5 | ||
| Supply voltage range | VCC | -0.5 | 7 | V | 4 | ||
| Input voltage range | VI | -0.5 | V | max = VCC + 0.5V | 4 | ||
| Output voltage range | VO | -0.5 | V | max = VCC + 0.5V | 4 | ||
| Input clamp current | IIK | -20 | 20 | mA | VI < -0.5V or VI > VCC + 0.5V | 4 | |
| Output clamp current | IOK | -50 | 50 | mA | VO < -0.5V or VO > VCC + 0.5V | 4 | |
| Continuous output current | IO | -50 | 50 | mA | VO = 0 to VCC | 4 | |
| Continuous output current through VCC or GND | -200 | 200 | mA | 4 | |||
| Junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| High-level output voltage | VOH | 1.44 | V | IOH = -1mA, VCC 1.8V | 6 | ||
| High-level output voltage | VOH | 2 | V | IOH = -2mA, VCC 2.5V | 6 | ||
| High-level output voltage | VOH | 2.4 | V | IOH = -4mA, VCC 3V | 6 | ||
| High-level output voltage | VOH | 3.7 | V | IOH = -24mA, VCC 4.5V | 6 | ||
| High-level output voltage | VOH | 4.7 | V | IOH = -24mA, VCC 5.5V | 6 | ||
| High-level output voltage | VOH | 3.85 | V | IOH = -75mA, VCC 5.5V | 6 | ||
| Low-level output voltage | VOL | 0.36 | V | IOL = 1mA, VCC 1.8V | 6 | ||
| Low-level output voltage | VOL | 0.5 | V | IOL = 2mA, VCC 2.5V | 6 | ||
| Low-level output voltage | VOL | 1.65 | V | IOL = 75mA, VCC 5.5V | 6 | ||
| Input leakage current | II | -1 | 1 | µA | VI = 5.5V or GND, 0V to 5.5V | 6 | |
| Supply current | ICC | 2 | µA | VI = VCC or GND, IO = 0, VCC 5.5V | 6 | ||
| Propagation delay tphl (Any A to Any Y) | tphl | 6.4 | 9.3 | ns | CL = 50 pF, VCC 5V | 7 | |
| Propagation delay tplh (Any A to Any Y) | tplh | 6.1 | 8.9 | ns | CL = 50 pF, VCC 5V | 7 | |
| Propagation delay tphl (G to Any Y) | tphl | 6.7 | 9.5 | ns | CL = 50 pF, VCC 5V | 7 | |
| Propagation delay tplh (G to Any Y) | tplh | 6.2 | 9 | ns | CL = 50 pF, VCC 5V | 7 | |
| Junction-to-ambient thermal resistance (PW TSSOP) | RθJA | 126.2 | °C/W | 6 | |||
| Junction-to-case (top) thermal resistance (PW TSSOP) | RθJC(top) | 60.5 | °C/W | 6 | |||
| Junction-to-board thermal resistance (PW TSSOP) | RθJB | 84.2 | °C/W | 6 | |||
| Junction-to-top characterization parameter (PW TSSOP) | ΨJT | 7.5 | °C/W | 6 | |||
| Junction-to-board characterization parameter (PW TSSOP) | ΨJB | 83.3 | °C/W | 6 |
CAD (KiCad official)
- Symbol:
SN74AC139PWRQ1 - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
sn74ac139pwrq1-etched.step/sn74ac139pwrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74ac139pwrq1.step/sn74ac139pwrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (30 pp, sha256
f9b2d4db0bbc6995, retrieved 2026-11-17, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).