Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

OPA2333MM

HGSEMI · Operational Amplifier · MSOP-8

OPA2333MM from HGSEMI, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT A output Channel A output; the output swing is stated as within 100mV of the supply rails, and the device is unity-gain stable.
2 -IN A input Channel A inverting input; the input common-mode range extends 0.1V beyond the supply rails, (V-)-0.1V to (V+)+0.1V.
3 +IN A input Channel A non-inverting input; the input common-mode range extends 0.1V beyond the supply rails, (V-)-0.1V to (V+)+0.1V.
4 V- power_in Negative power supply (lowest potential); the operating supply range is 1.8V to 5.5V total (V+ minus V-).
5 +IN B input Channel B non-inverting input; the input common-mode range extends 0.1V beyond the supply rails, (V-)-0.1V to (V+)+0.1V.
6 -IN B input Channel B inverting input; the input common-mode range extends 0.1V beyond the supply rails, (V-)-0.1V to (V+)+0.1V.
7 OUT B output Channel B output; the output swing is stated as within 100mV of the supply rails, and the device is unity-gain stable.
8 V+ power_in Positive power supply (highest potential); the operating supply range is 1.8V to 5.5V total (V+ minus V-).

Key specifications

Parameter Value
Manufacturer HGSEMI
Package MSOP-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input offset voltage (OPA2333, non-B) VOS 2 15 µV VS = 5V 8
Power supply rejection ratio PSRR 1 8 µV/V VS = 1.8V to 5.5V 8
Input bias current IB -70 70 pA 8
Input bias current over full temperature range IB -150 150 pA TA = -40°C to +125°C 8
Input offset current IOS -140 140 pA 8
Common-mode rejection ratio CMRR 102 115 dB (V-) - 0.1V < VCM < (V+) + 0.1V 8
Open-loop voltage gain AOL 102 130 dB (V-) + 0.1V < VO < (V+) - 0.1V 8
Output voltage swing from supply rail 30 70 mV TA = -40°C to +125°C 8
Short-circuit current ISC -5 5 mA 8
Quiescent current per amplifier IQ 17 28 µA IO = 0mA, TA = -40°C to +125°C 9
Supply voltage (rated range) VS 1.8 5.5 V 6
Rated temperature range -40 125 °C 6
Operating temperature range -40 85 °C 9
Supply voltage VS 7 V VS = (V+) - (V-) 6
Current at signal input pins -10 10 mA 6
Operating temperature -40 125 °C 6
Soldering lead temperature (10 s) 260 °C 10 s 6
Junction temperature 150 °C 6
Storage temperature Tstg -65 150 °C 6
ESD human body model (HBM) V(ESD) -4000 4000 V ANSI/ESDA/JEDEC JS-001 6
ESD charged device model (CDM) V(ESD) -1000 1000 V JEDEC JESD22-C101 6
Junction-to-ambient thermal resistance (MSOP-8) RθJA 180.3 °C/W 7
Junction-to-case (top) thermal resistance (MSOP-8) RθJC(top) 48.1 °C/W 7
Junction-to-board thermal resistance (MSOP-8) RθJB 100.9 °C/W 7
Junction-to-top characterization parameter (MSOP-8) ψJT 2.4 °C/W 7
Junction-to-board characterization parameter (MSOP-8) ψJB 99.3 °C/W 7

CAD (KiCad official)

  • Symbol: OPA2333MM
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: opa2333mm-etched.step / opa2333mm-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); opa2333mm.step / opa2333mm.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HGSEMI datasheet (20 pp, sha256 bc8cb63c9597692f, retrieved 2026-11-04, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF