3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownHUF75344P3
onsemi · MOSFETs · TO-220AB-3
HUF75344P3 from onsemi, in a TO-220AB-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | G | input | Gate; controls the channel, with VGS(TH) of 2 V to 4 V at ID = 250µA and an absolute maximum of ±20 V gate-to-source. |
| 2 | D | passive | Drain, also connected to the mounting flange; rated 55 V drain-to-source and 75 A continuous drain current. |
| 3 | S | passive | Source; the current return terminal of the N-channel MOSFET, with the body diode running from source to drain (VSD max 1.25 V at 75 A). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | TO-220AB-3 |
| Category | Transistors |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Drain to Source Voltage | VDSS | 55 | V | Note 1: TJ = 25°C to 150°C | 3 | ||
| Drain to Gate Voltage | VDGR | 55 | V | RGS = 20kΩ (Note 1) | 3 | ||
| Gate to Source Voltage | VGS | -20 | 20 | V | 3 | ||
| Operating and Storage Temperature | TJ, TSTG | -55 | 175 | °C | 3 | ||
| Maximum Temperature for Soldering, Leads | TL | 300 | °C | at 0.063in (1.6mm) from case for 10s | 3 | ||
| Maximum Temperature for Soldering, Package Body | Tpkg | 260 | °C | Package body for 10s, see Techbrief 334 | 3 | ||
| Power Dissipation | PD | 285 | W | TC = 25°C | 3 | ||
| Drain to Source Breakdown Voltage | BVDSS | 55 | V | ID = 250µA, VGS = 0V (Figure 11) | 3 | ||
| Zero Gate Voltage Drain Current | IDSS | 1 | µA | VDS = 50V, VGS = 0V | 3 | ||
| Zero Gate Voltage Drain Current at 150°C | IDSS | 250 | µA | VDS = 45V, VGS = 0V, TC = 150°C | 3 | ||
| Gate to Source Leakage Current | IGSS | -100 | 100 | nA | VGS = ±20V | 3 | |
| Gate to Source Threshold Voltage | VGS(TH) | 2 | 4 | V | VGS = VDS, ID = 250µA (Figure 10) | 3 | |
| Drain to Source On Resistance | rDS(ON) | 6.5 | 8 | mΩ | ID = 75A, VGS = 10V (Figure 9) | 3 | |
| Turn-On Time | tON | 187 | ns | VDD = 30V, ID ≅ 75A, RL = 0.4Ω, VGS = 10V, RGS = 3.0Ω | 3 | ||
| Turn-Off Time | tOFF | 147 | ns | VDD = 30V, ID ≅ 75A, RL = 0.4Ω, VGS = 10V, RGS = 3.0Ω | 3 | ||
| Total Gate Charge | Qg(TOT) | 175 | 210 | nC | VGS = 0V to 20V, VDD = 30V, ID ≅ 75A, RL = 0.4Ω, Ig(REF) = 1.0mA (Figure 13) | 3 | |
| Gate Charge at 10V | Qg(10) | 90 | 108 | nC | VGS = 0V to 10V | 3 | |
| Threshold Gate Charge | Qg(TH) | 5.9 | 7 | nC | VGS = 0V to 2V | 3 | |
| Source to Drain Diode Voltage | VSD | 1.25 | V | ISD = 75A | 4 | ||
| Reverse Recovery Time | trr | 105 | ns | ISD = 75A, dISD/dt = 100A/µs | 4 | ||
| Reverse Recovered Charge | QRR | 210 | nC | ISD = 75A, dISD/dt = 100A/µs | 4 | ||
| Thermal Resistance Junction to Case | RθJC | 0.52 | °C/W | Figure 3 | 3 | ||
| Thermal Resistance Junction to Ambient, TO-220 | RθJA | 62 | °C/W | TO-220 package | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | Abs | Package Body for 10s, See Techbrief 334 . . . . . . . . . . . . . . . Tpkg CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress | 3 |
CAD (KiCad official)
- Symbol:
HUF75344P3 - Footprint:
Package_TO_SOT_THT:TO-220-3_Vertical - 3D model: TO-220AB-3 (KiCad packages3D, STEP)
- 3D model files:
huf75344p3-etched.step/huf75344p3-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);huf75344p3.step/huf75344p3.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (11 pp, sha256
5c7fb68e781095e9, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).