Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MCP73855-I

Microchip Tech · Battery Management ICs · DFN-10-EP(3x3)

MCP73855-I from Microchip Tech, in a DFN-10-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 STAT1 output Charge status output is a current-limited open-drain drive for direct connection to an LED, or it can use a pull-up resistor to interface with a host microcontroller.
2 VSET input Voltage regulation selection: connect to VSS for 4.1V regulation voltage or to VDD for 4.2V regulation voltage.
3 VDD1 power_in Battery management input supply; a supply of [VREG(Typ) + 0.3V] to 5.5V is recommended, bypassed to VSS with a minimum of 4.7 µF.
4 VSS1 power_in Battery management 0V reference, to be connected to the negative terminal of the battery.
5 PROG passive Current regulation set: a resistor from PROG to VSS scales the preconditioning, fast-charge and termination currents.
6 TIMER passive Timer set: all safety timers are scaled by CTIMER/0.1 µF, where CTIMER is the external capacitor on this pin.
7 VSS2 power_in Battery management 0V reference, to be connected to the negative terminal of the battery.
8 VBAT1 power_out Battery charge control output connected to the positive battery terminal; it is the drain of the internal P-channel pass transistor and needs a minimum 4.7 µF bypass to VSS for loop stability when the battery is disconnected.
9 VBAT2 power_out Battery charge control output connected to the positive battery terminal; it is the drain of the internal P-channel pass transistor and needs a minimum 4.7 µF bypass to VSS for loop stability when the battery is disconnected.
10 EN input Logic enable input used to force charge termination, initiate a charge, clear faults, or disable automatic recharge.
11 EP power_in Exposed pad, which is at VSS potential and should be connected to VSS.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package DFN-10-EP(3x3)
Category Power Management
Pins 11

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage (VDD1,2) absolute maximum VDD1,2 6.5 V 3
All Inputs and Outputs w.r.t. VSS -0.3 V 3
ESD protection, Human Body Model 4 kV Human Body Model (1.5k in series with 100pF) 3
ESD protection, Machine Model 400 V Machine Model (200pF, no series resistance) 3
Supply Voltage VDD 4.5 5.5 V 3
Supply Current (disabled) ISS 0.28 4 µA Disabled 3
Supply Current (operating) ISS 0.83 4 mA Operating 3
UVLO Start Threshold VSTART 4.25 4.45 4.65 V VDD Low-to-High 3
UVLO Stop Threshold VSTOP 4.2 4.4 4.55 V VDD High-to-Low 3
Regulated Output Voltage (4.1V option) VREG 4.079 4.1 4.121 V VSET = VSS 3
Regulated Output Voltage (4.2V option) VREG 4.179 4.2 4.221 V VSET = VDD; VDD = [VREG(Typ) + 1V], IOUT = 10 mA, TA = -5°C to +55°C (printed note below this row) 3
Line Regulation ΔVBAT/(VBAT·ΔVDD) 0.02 0.25 %/V VDD = [VREG(Typ) + 1V] to 5.5V; IOUT = 10 mA 3
Load Regulation ΔVBAT/VBAT 0.022 0.25 % IOUT = 10 mA to 150 mA; VDD = [VREG(Typ) + 1V] 3
Output Reverse-Leakage Current IDISCHARGE 0.24 1 µA VDD < VBAT = VREG(Typ) 3
Fast Charge Current Regulation (PROG open) IREG 70 85 100 mA PROG = OPEN 3
Fast Charge Current Regulation (PROG = VSS) IREG 325 400 475 mA PROG = VSS; TA = -5°C to +55°C 3
Precondition Current Regulation (PROG open) IPREG 5 9 15 mA PROG = OPEN 3
Precondition Current Regulation (PROG = VSS) IPREG 25 40 75 mA PROG = VSS; TA = -5°C to +55°C 3
Precondition Threshold Voltage (VSET = VSS) VPTH 2.7 2.8 2.9 V VSET = VSS; VBAT Low-to-High 3
Precondition Threshold Voltage (VSET = VDD) VPTH 2.75 2.85 2.95 V VSET = VDD; VBAT Low-to-High 3
Charge Termination Current (PROG open) ITERM 3.7 6.5 9.3 mA PROG = OPEN 4
Charge Termination Current (PROG = VSS) ITERM 18 32 46 mA PROG = VSS; TA = -5°C to +55°C 4
Status Indicator STAT1 Sink Current ISINK 4 8 12 mA 4
Status Indicator Low Output Voltage VOL 200 400 mV ISINK = 1 mA 4
Status Input Leakage Current ILK 0.01 1 µA ISINK = 0 mA, VSTAT1,2 = 5.5V 4
Enable Input High Voltage Level VIH 1.4 V 4
Enable Input Low Voltage Level VIL 0.8 V 4
Enable Input Leakage Current ILK 0.01 1 µA VENABLE = 5.5V 4
UVLO Start Delay tSTART 5 ms VDD Low-to-High 5
Transition Time Out of Preconditioning tDELAY 1 ms VBAT < VPTH to VBAT > VPTH 5
Current Rise Time Out of Preconditioning tRISE 1 ms IOUT Rising to 90% of IREG 5
Fast Charge Safety Timer Period tFAST 1.1 1.5 1.9 Hours CTIMER = 0.1 µF 5
Preconditioning Charge Safety Timer Period tPRECON 45 60 75 Minutes CTIMER = 0.1 µF 5
Elapsed Time Termination Period tTERM 2.2 3 3.8 Hours CTIMER = 0.1 µF 5
Status Output Turn-off Time tOFF 200 µs ISINK = 1 mA to 0 mA 5
Status Output Turn-on Time tON 200 µs ISINK = 0 mA to 1 mA 5
Specified Temperature Range TA -40 85 °C 5
Operating Temperature Range TJ -40 125 °C 5
Storage Temperature Range TA -65 150 °C 5
Thermal Resistance, 10-L 3x3 mm DFN, junction-to-ambient JA 51 °C/W 4-Layer JC51-7 Standard Board, Natural Convection 5

CAD (KiCad official)

  • Symbol: MCP73855-I
  • Footprint: Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.55x2.48mm
  • 3D model: DFN-10-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: mcp73855-i-etched.step / mcp73855-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp73855-i.step / mcp73855-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (32 pp, sha256 58fc7769055374e6, retrieved 2026-11-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF