component
TPS79718MDCKREP
Public Made by Adomby adom
Texas Instruments Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SC-70-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTPS79718MDCKREP
Texas Instruments · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SC-70-5
TPS79718MDCKREP from Texas Instruments, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | PG | output | Open-drain active-high power good output that goes to high impedance when VO exceeds approximately 90% of the regulated voltage and to low impedance when VO falls below approximately 90%, and it requires a pullup resistor. |
| 2 | GND | power_in | Ground terminal; all voltage values in the absolute maximum ratings are referenced to the network ground terminal. |
| 3 | NC | unconnected | No connection; the datasheet assigns no function to this pin. |
| 4 | IN | power_in | Power supply input to the device, with an absolute input range of 0.3 V to 6 V and an operating range of 1.8 V minimum (or VO(typ) + 1 V, whichever is greater) to 5.5 V maximum. |
| 5 | OUT | power_out | Provides the regulated output voltage; maximum dc output voltage is 4.9 V and output current is limited internally to a range of 190 mA to 300 mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SC-70-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
CAD (KiCad official)
- Symbol:
TPS79718MDCKREP - Footprint:
Package_TO_SOT_SMD:SOT-353_SC-70-5 - 3D model: SC-70-5 (KiCad packages3D, STEP)
- 3D model files:
tps79718mdckrep-etched.step/tps79718mdckrep-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps79718mdckrep.step/tps79718mdckrep.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (17 pp, sha256
bd0bdf9d2889c005, retrieved 2026-10-11, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).