3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLM393PWR
Texas Instruments · Comparators · TSSOP-8
LM393PWR from Texas Instruments, in a TSSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OUT | output | Open-collector output of comparator 1 compatible with TTL/MOS/CMOS logic; maximum output current 20mA. |
| 2 | 1IN- | input | Negative input of comparator 1; input voltage range 0 to (VCC - 2.0V). |
| 3 | 1IN+ | input | Positive input of comparator 1; input voltage range 0 to (VCC - 2.0V). |
| 4 | GND | power_in | Ground; connection to negative power supply rail. |
| 5 | 2IN+ | input | Positive input of comparator 2; input voltage range 0 to (VCC - 2.0V). |
| 6 | 2IN- | input | Negative input of comparator 2; input voltage range 0 to (VCC - 2.0V). |
| 7 | 2OUT | output | Open-collector output of comparator 2 compatible with TTL/MOS/CMOS logic; maximum output current 20mA. |
| 8 | VCC | power_in | Positive power supply; operating voltage range 2 to 30V for LM393. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (non-V devices, recommended) | VS | 2 | 30 | V | VS = (V+) - (V-), non-V devices | 4 | |
| Ambient temperature (LM393) | TA | 0 | 70 | °C | LM393, LM393A | 4 | |
| Input voltage range (non-B devices), upper limit given as expression | VIVR | 0 | V | non-B devices; max printed as (V+) - 2.0 V | 4 | ||
| Supply voltage (non-B, absolute max) | VCC | -0.3 | 36 | V | Non-B versions | 4 | |
| Differential input voltage (non-B, absolute max) | VID | -36 | 36 | V | Non-B versions | 4 | |
| Input voltage, either input (non-B, absolute max) | VI | -0.3 | 36 | V | Non-B versions | 4 | |
| Input current | IIK | -50 | mA | Input current through parasitic diode; printed as single value -50 mA | 4 | ||
| Output voltage (non-B, absolute max) | VO | -0.3 | 36 | V | Non-B versions | 4 | |
| Output current (non-B, absolute max) | IO | 20 | mA | Non-B versions | 4 | ||
| Operating virtual-junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Input offset voltage | VIO | 2 | 5 | mV | 25°C; VCC = 5V to 30V, VIC = VICR min, VO = 1.4V | 8 | |
| Input offset voltage (full range) | VIO | 9 | mV | Full range (0°C to 70°C); VCC = 5V to 30V, VIC = VICR min, VO = 1.4V | 8 | ||
| Input offset current | IIO | 5 | 50 | nA | 25°C; VO = 1.4V | 8 | |
| Input offset current (full range) | IIO | 250 | nA | Full range; VO = 1.4V | 8 | ||
| Input bias current | IIB | -25 | -250 | nA | 25°C; VO = 1.4V | 8 | |
| Input bias current (full range) | IIB | -400 | nA | Full range; VO = 1.4V | 8 | ||
| Common-mode input-voltage range, 25°C (lower limit) | VICR | 0 | V | 25°C; upper limit printed as VCC - 1.5 V | 8 | ||
| Common-mode input-voltage range, full range (lower limit) | VICR | 0 | V | Full range; upper limit printed as VCC - 2 V | 8 | ||
| Large-signal differential-voltage amplification | AVD | 50 | 200 | V/mV | 25°C; VCC = 15V, VO = 1.4V to 11.4V, RL ≥ 15kΩ to VCC | 8 | |
| High-level output current | IOH | 0.1 | 50 | nA | 25°C; VOH = 5V, VID = 1V | 8 | |
| High-level output current (full range) | IOH | 1 | µA | Full range; VOH = 30V, VID = 1V | 8 | ||
| Low-level output voltage | VOL | 130 | 400 | mV | 25°C; IOL = 4mA, VID = -1V | 8 | |
| Low-level output voltage (full range) | VOL | 700 | mV | Full range; IOL = 4mA, VID = -1V | 8 | ||
| Low-level output current | IOL | 6 | mA | 25°C; VOL = 1.5V, VID = -1V | 8 | ||
| Supply current, 5V | ICC | 0.45 | 1 | mA | 25°C; VCC = 5V, RL = ∞ | 8 | |
| Supply current, 30V | ICC | 0.55 | 2.5 | mA | Full range; VCC = 30V, RL = ∞ | 8 | |
| Response time, 100mV step with 5mV overdrive | tresponse | 1.3 | µs | VCC = 5V, TA = 25°C; RL to 5V through 5.1kΩ, CL = 15pF | 10 | ||
| Response time, TTL-level input step | tresponse | 0.3 | µs | VCC = 5V, TA = 25°C; RL to 5V through 5.1kΩ, CL = 15pF | 10 | ||
| Junction-to-ambient thermal resistance (PW TSSOP) | RθJA | 200.6 | °C/W | PW (TSSOP) 8-pin | 5 | ||
| Junction-to-case (top) thermal resistance (PW TSSOP) | RθJC(top) | 89.6 | °C/W | PW (TSSOP) 8-pin | 5 | ||
| Junction-to-board thermal resistance (PW TSSOP) | RθJB | 131.3 | °C/W | PW (TSSOP) 8-pin | 5 | ||
| Junction-to-top characterization parameter (PW TSSOP) | ψJT | 22.1 | °C/W | PW (TSSOP) 8-pin | 5 | ||
| Junction-to-board characterization parameter (PW TSSOP) | ψJB | 129.6 | °C/W | PW (TSSOP) 8-pin | 5 |
CAD (KiCad official)
- Symbol:
LM393PWR - Footprint:
Package_SO:TSSOP-8_3x3mm_P0.65mm - 3D model: TSSOP-8 (KiCad packages3D, STEP)
- 3D model files:
lm393pwr-etched.step/lm393pwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm393pwr.step/lm393pwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (56 pp, sha256
f28830c2f4cbd9ef, retrieved 2026-10-03, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).