3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownAD7306ARZ
Analog Devices · Multi-protocol Transceivers · SOIC-24-300mil
AD7306ARZ from Analog Devices, in a SOIC-24-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | V+ | power_out | Internally generated positive supply (+9 V nominal); a 0.1 µF capacitor must be connected between this pin and GND. |
| 2 | C1+ | passive | External capacitor 1 terminal; a 0.1 µF capacitor must be connected between C1+ and C1-. |
| 3 | C1- | passive | External capacitor 1 terminal; a 0.1 µF capacitor must be connected between C1- and C1+. |
| 4 | R2IN | input | RS-232 receiver R2 input, which accepts RS-232 input voltages (±15 V input range per the RS-232 receiver specification). |
| 5 | T1OUT | output | RS-232 transmitter (driver) T1 output, typically ±7.5 V. |
| 6 | T2OUT | output | RS-232 transmitter (driver) T2 output, typically ±7.5 V. |
| 7 | VCC | power_in | Power supply input, 5 V ±5%. |
| 8 | R1IN (B) | input | RS-422 receiver R1 differential input B. |
| 9 | R1IN/R1IN (A) | input | Receiver R1 input that may be configured for single-ended RS-232 levels or differential RS-422 levels using the 232/422 SEL pin. |
| 10 | T3OUT (B) | output | RS-422 transmitter (driver) T3 differential output B. |
| 11 | T3OUT (A) | output | RS-422 transmitter (driver) T3 differential output A. |
| 12 | NC | unconnected | No connect pin. |
| 13 | NC | unconnected | No connect pin. |
| 14 | GND | power_in | Ground pin; must be connected to 0 V. |
| 15 | 232/422 SEL | input | Select input that configures receiver R1 for RS-232 (logic 1) or RS-422 (logic 0) signal levels. |
| 16 | T3IN | input | TTL/CMOS input to the RS-422 transmitter T3. |
| 17 | R1OUT | output | TTL/CMOS output from receiver R1. |
| 18 | GND | power_in | Ground pin; must be connected to 0 V. |
| 19 | T2IN | input | TTL/CMOS input to RS-232 transmitter T2. |
| 20 | T1IN | input | TTL/CMOS input to RS-232 transmitter T1. |
| 21 | R2OUT | output | TTL/CMOS output from receiver R2. |
| 22 | C2+ | passive | External capacitor 2 terminal; a 0.1 µF capacitor must be connected between C2+ and C2-. |
| 23 | C2- | passive | External capacitor 2 terminal; a 0.1 µF capacitor must be connected between C2- and C2+. |
| 24 | V- | power_out | Internally generated negative supply (-9 V nominal); a 0.1 µF capacitor must be connected between this pin and GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOIC-24-300mil |
| Category | Communication Interface Chip/UART/485/232 |
| Pins | 24 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| TTL Input Logic Low (RS-232 driver) | VINL | 0.8 | V | 2 | |||
| TTL Input Logic High (RS-232 driver) | VINH | 2 | V | 2 | |||
| Input Logic Current (RS-232 driver) | -10 | 0.1 | 10 | µA | VIN = 0 V to VCC | 2 | |
| RS-232 High Level Output Voltage | 5 | 7.3 | V | RL = 3 kΩ | 2 | ||
| RS-232 Low Level Output Voltage | -5 | -6.5 | V | RL = 3 kΩ | 2 | ||
| Output Short Circuit Current (RS-232 driver) | -5 | 12 | 5 | mA | VOUT = 0 V, TA = 0°C to +70°C | 2 | |
| Slew Rate | 8 | 20 | 30 | V/µs | CL = 50 pF, RL = 3 kΩ | 2 | |
| Slew Rate | 4 | V/µs | CL = 2500 pF, RL = 3 kΩ | 2 | |||
| Output Resistance (Powered Down) | 300 | Ω | VCC = 0 V, VOUT = ±3 V | 2 | |||
| Output Resistance (Powered Down) | 10 | MΩ | VCC = 0 V, VOUT = ±3 V | 2 | |||
| RS-232 Input Voltage Range | -15 | 15 | V | 2 | |||
| RS-232 Input Threshold Low | 0.8 | 1.3 | V | 2 | |||
| RS-232 Input Threshold High | 1.7 | 2.4 | V | 2 | |||
| RS-232 Input Hysteresis | 0.1 | 0.4 | 1 | V | 2 | ||
| RS-232 Input Resistance | 3 | 5 | 7 | kΩ | 2 | ||
| TTL Output Voltage Low (RS-232 receiver) | VOL | 0.2 | 0.4 | V | IOUT = +4 mA | 2 | |
| TTL Output Voltage High (RS-232 receiver) | VOH | 3.5 | 4.8 | V | IOUT = -4 mA | 2 | |
| TTL Input Logic Low (RS-422 driver) | VINL | 0.8 | V | 2 | |||
| TTL Input Logic High (RS-422 driver) | VINH | 2 | V | 2 | |||
| Logic Input Current (RS-422 driver) | -10 | 0.1 | 10 | µA | VIN = 0 V to VCC | 2 | |
| Differential Output Voltage | 2 | V | RL Diff = 100 Ω; Figure 3 | 2 | |||
| Common-Mode Output Voltage | 3 | V | 2 | ||||
| ∆/VOUT/ for Complementary O/P States | 0.2 | V | RL Diff = 100 Ω | 2 | |||
| Output Short Circuit Current (RS-422 driver) | 35 | 150 | mA | 0 V ≤ VCMR ≤ +7 V | 2 | ||
| Common-Mode Voltage Range (RS-422 receiver) | -7 | 7 | V | Typical RS-422 Input Voltage <5 V | 2 | ||
| Differential Input Threshold Voltage | -0.2 | 0.2 | V | 2 | |||
| Input Voltage Hysteresis (RS-422 receiver) | 70 | mV | VCM = 0 V | 2 | |||
| Input Resistance (RS-422 receiver) | 3 | 5 | 7 | kΩ | 2 | ||
| TTL Output Voltage Low (RS-422 receiver) | VOL | 0.2 | 0.4 | V | IOUT = +4.0 mA | 2 | |
| TTL Output Voltage High (RS-422 receiver) | VOH | 3.5 | 4.8 | V | IOUT = -4.0 mA | 2 | |
| Input Logic Low (232/422 SEL) | VINL | 0.8 | V | 2 | |||
| Input Logic High (232/422 SEL) | VINH | 2 | V | 2 | |||
| Logic Input Current (232/422 SEL) | -10 | 0.1 | 10 | µA | VIN = 0 V to VCC | 2 | |
| Power Supply Current | ICC | 10 | 15 | mA | Outputs Unloaded | 2 | |
| V+ Output Voltage (charge pump) | V+ | 9 | V | RS-232 Output Unloaded | 2 | ||
| V- Output Voltage (charge pump) | V- | -9 | V | RS-232 Outputs Unloaded | 2 | ||
| Generator Rise Time | 200 | µs | 2 | ||||
| Propagation Delay Input to Output (RS-422 driver) | TPLH, TPHL | 35 | 100 | ns | RL Diff = 100 Ω. CL1 = CL2 = 100 pF, Figures 2 & 4 | 3 | |
| RS-422 O/P to O/P Skew | TSKEW | 2 | 10 | ns | RL Diff = 100 Ω. CL1 = CL2 = 100 pF, Figures 2 & 4 | 3 | |
| Driver Rise/Fall Time | TR, TF | 15 | 40 | ns | RL Diff = 100 Ω. CL1 = CL2 = 100 pF, Figures 2 & 4 | 3 | |
| Propagation Delay Input to Output (RS-422 receiver) | TPLH, TPHL | 70 | 200 | ns | CL = 15 pF. Figure 5 | 3 | |
| RS-232 Disable to RS-422 Enable | TEN1 | 70 | 200 | ns | Figure 6 | 3 | |
| RS-422 Disable to RS-232 Enable | TEN2 | 70 | 200 | ns | Figure 6 | 3 | |
| Transmission Rate (RS-422) | 5 | MHz | 3 | ||||
| Transmission Rate (RS-232) | 100 | kHz | CL = 50 pF | 3 | |||
| Transmission Rate (RS-232) | 20 | kHz | CL = 2.5 nF | 3 | |||
| VCC supply voltage | VCC | 7 | V | 3 | |||
| V+ (positive charge pump output) | V+ | 13.2 | V | 3 | |||
| V- (negative charge pump output) | V- | -13.2 | 0.3 | V | 3 | ||
| T3IN input voltage | T3IN | -0.3 | V | 3 | |||
| R1IN A/B, R2IN input voltage | R1IN, R2IN | -25 | 25 | V | 3 | ||
| 232/422 SEL input voltage | 232/422 SEL | -0.3 | V | 3 | |||
| T1OUT, T2OUT output voltage | T1OUT, T2OUT | -15 | 15 | V | 3 | ||
| T3OUT(A), T3OUT(B) output voltage | T3OUT | -0.3 | 7 | V | 3 | ||
| R1OUT, R2OUT output voltage | R1OUT, R2OUT | -0.3 | V | 3 | |||
| Power Dissipation (Small Outline) | 650 | mW | 3 | ||||
| Storage Temperature Range | -65 | 150 | °C | 3 | |||
| Lead Temperature (Soldering, 10 s) | 300 | °C | 10 secs | 3 | |||
| Operating Temperature Range (Industrial, A Version) | -40 | 85 | °C | A Version (AD7306ARZ) | 3 | ||
| Supply Voltage VCC | VCC | 5 | V | 5 V ±5%; C1 = C2 = C3 = C4 = 0.1 µF | 2 |
CAD (KiCad official)
- Symbol:
AD7306ARZ - Footprint:
Package_SO:SOIC-24W_7.5x15.4mm_P1.27mm - 3D model: SOIC-24-300mil (KiCad packages3D, STEP)
- 3D model files:
ad7306arz-etched.step/ad7306arz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ad7306arz.step/ad7306arz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (10 pp, sha256
9e94e5ba3bba2b74, retrieved 2026-11-17, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).