component
LR122WF280LT4E
Public Made by Adomby adom
UNI ROYAL Uniroyal Elec Current Sense Resistors / Shunt Resistors, 2512. Unpolarised two-terminal part: the datasheet prints no pin numbers, so pins 1 and 2 follow the library convention, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLR122WF280LT4E
UNI ROYAL Uniroyal Elec · Current Sense Resistors / Shunt Resistors · 2512
LR122WF280LT4E from UNI ROYAL Uniroyal Elec, in a 2512. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1 | passive | Terminal 1 of an unpolarised resistor; either orientation. |
| 2 | 2 | passive | Terminal 2 of an unpolarised resistor; either orientation. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | UNI ROYAL Uniroyal Elec |
| Package | 2512 |
| Category | Resistors |
| Pins | 2 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Temperature coefficient (TCR) | TCR | -50 | 50 | PPM/℃ | t1=+25°C, t2=125°C test temperature; R2-R1/R1(t2-t1)×10^6 | 4 | |
| Resistance tolerance (7th code F = ±1%) | -1 | 1 | % | MPN code F = ±1% | 2 | ||
| Short-time overload resistance change | ΔR | -0.5 | 0.5 | % | 5 times rated power (LR12-2W), 5 seconds | 4 | |
| Load life resistance change | ΔR | -1 | 1 | % | 1000 hours at rated or max working current (whichever less), 1.5 h ON / 0.5 h OFF, 70±2°C ambient | 4 | |
| High temperature exposure resistance change | ΔR | -1 | 1 | % | 155±2°C for 1000 H (MIL-STD-202 108A) | 4 | |
| Biased humidity resistance change | ΔR | -0.5 | 0.5 | % | 1000 hours 85°C/85%RH, 10% of operating power; measured at 24±4 h after test | 4 | |
| Rapid change of temperature resistance change | ΔR | -0.5 | 0.5 | % | 30 min at -55°C and 30 min at 155°C; 100 cycles | 4 | |
| Terminal bending resistance change | ΔR | -0.5 | 0.5 | % | 2 mm, 10 s | 4 | |
| Resistance to solder heat resistance change | ΔR | -0.5 | 0.5 | % | Dip at 260±5°C, hold 10±1 seconds | 4 | |
| Solderability terminal coverage | 95 | % | Coverage of new surface; solder temperature 245±3°C; dwell 2~3 seconds | 4 | |||
| Dielectric withstanding limit surge current | 50 | mA | Applied 500 VAC for 1 minute; limit surge current 50 mA (max.) | 4 | |||
| Rated power | P | 2 | W | Continuous load at 70°C ambient; derate above 70°C per Figure 1 | 4 |
CAD (KiCad official)
- Symbol:
LR122WF280LT4E - Footprint:
Resistor_SMD:R_2512_6332Metric - 3D model: 2512 (KiCad packages3D, STEP)
- 3D model files:
lr122wf280lt4e-etched.step/lr122wf280lt4e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lr122wf280lt4e.step/lr122wf280lt4e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: UNI ROYAL Uniroyal Elec datasheet (6 pp, sha256
697e24f2047069dc, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins, primarytwo-terminal convention(convention), consensusoff(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).