3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSI8442AB-D-IS
Skyworks Solutions · Digital Isolators · SOIC-16
SI8442AB-D-IS from Skyworks Solutions, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD1 | power_in | Side 1 power supply, operating from 2.70 V to 5.5 V. |
| 2 | GND1 | power_in | Side 1 ground. |
| 3 | A1 | input | Side 1 digital input. |
| 4 | A2 | input | Side 1 digital input. |
| 5 | A3 | bidirectional | Side 1 digital input or output; on the Si8442, output A3 is enabled and follows the input state when EN1 is high, and is disabled to logic low or high-impedance when EN1 is low. |
| 6 | A4 | bidirectional | Side 1 digital input or output; on the Si8442, output A4 is enabled and follows the input state when EN1 is high, and is disabled to logic low or high-impedance when EN1 is low. |
| 7 | EN1 | input | Side 1 active high enable, internally pulled up to local VDD by a 3 µA current source and may be left floating or tied to a logic level. |
| 8 | GND1 | power_in | Side 1 ground. |
| 9 | GND2 | power_in | Side 2 ground. |
| 10 | EN2 | input | Side 2 active high enable, internally pulled up to local VDD by a 3 µA current source; on the Si8442 it enables outputs B1 and B2. |
| 11 | B4 | bidirectional | Side 2 digital input or output. |
| 12 | B3 | bidirectional | Side 2 digital input or output. |
| 13 | B2 | output | Side 2 digital output, enabled and following the input state when EN2 is high on the Si8442. |
| 14 | B1 | output | Side 2 digital output, enabled and following the input state when EN2 is high on the Si8442. |
| 15 | GND2 | power_in | Side 2 ground. |
| 16 | VDD2 | power_in | Side 2 power supply, operating from 2.70 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Skyworks Solutions |
| Package | SOIC-16 |
| Category | Signal Isolation Devices |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient Operating Temperature | TA | -40 | 25 | 125 | ºC | 150 Mbps, 15 pF, 5 V | 3 |
| Supply Voltage VDD1 | VDD1 | 2.7 | 5.5 | V | 3 | ||
| Supply Voltage VDD2 | VDD2 | 2.7 | 5.5 | V | 3 | ||
| Storage Temperature | TSTG | -65 | 150 | °C | 3 | ||
| Ambient Temperature Under Bias | TA | -40 | 125 | °C | 3 | ||
| Supply Voltage (Revision D) | VDD1, VDD2 | -0.5 | 6 | V | Revision D | 3 | |
| Input Voltage | VI | -0.5 | V | max printed as VDD + 0.5 | 3 | ||
| Output Voltage | VO | -0.5 | V | max printed as VDD + 0.5 | 3 | ||
| Output Current Drive Channel | IO | 10 | mA | 3 | |||
| Lead Solder Temperature | 260 | °C | 10 s | 3 | |||
| Maximum Isolation Voltage | 3600 | VRMS | 1 s | 3 | |||
| High Level Input Voltage | VIH | 2 | V | VDD1 = VDD2 = 5 V ±10%, TA = -40 to 125 °C | 4 | ||
| Low Level Input Voltage | VIL | 0.8 | V | VDD1 = VDD2 = 5 V ±10%, TA = -40 to 125 °C | 4 | ||
| High Level Output Voltage | VOH | 4.8 | V | Ioh = -4 mA; min printed as VDD1,VDD2, 0.4; 5 V | 4 | ||
| Low Level Output Voltage | VOL | 0.2 | 0.4 | V | Iol = 4 mA; 5 V | 4 | |
| Input Leakage Current | IL | -10 | 10 | µA | 4 | ||
| Output Impedance | ZO | 85 | Ω | nominal, ±40% per note 1 | 4 | ||
| Enable Input High Current | IENH | 2 | µA | VENx = VIH | 4 | ||
| Enable Input Low Current | IENL | 2 | µA | VENx = VIL | 4 | ||
| DC Supply Current Si8442Ax VDD1, inputs 0 | VDD1 | 2.3 | 3.5 | mA | All inputs 0 DC | 4 | |
| DC Supply Current Si8442Ax VDD2, inputs 0 | VDD2 | 2.3 | 3.5 | mA | All inputs 0 DC | 4 | |
| DC Supply Current Si8442Ax VDD1, inputs 1 | VDD1 | 4.5 | 6.8 | mA | All inputs 1 DC | 4 | |
| DC Supply Current Si8442Ax VDD2, inputs 1 | VDD2 | 4.5 | 6.8 | mA | All inputs 1 DC | 4 | |
| 1 Mbps Supply Current Si8442Ax VDD1 | VDD1 | 3.6 | 5.4 | mA | All inputs = 500 kHz square wave, CI = 15 pF on all outputs | 4 | |
| 1 Mbps Supply Current Si8442Ax VDD2 | VDD2 | 3.6 | 5.4 | mA | All inputs = 500 kHz square wave, CI = 15 pF on all outputs | 4 | |
| Maximum Data Rate Si844xAx | 0 | 1 | Mbps | 5 | |||
| Minimum Pulse Width Si844xAx | 250 | ns | 5 | ||||
| Propagation Delay Si844xAx | tPHL, tPLH | 35 | ns | See Figure 2 | 5 | ||
| Pulse Width Distortion Si844xAx | PWD | 25 | ns | See Figure 2 | 5 | ||
| Propagation Delay Skew Si844xAx | tPSK(P-P) | 40 | ns | 5 | |||
| Channel-Channel Skew Si844xAx | tPSK | 35 | ns | 5 | |||
| Output Rise Time (5 V) | tr | 3.8 | 5 | ns | CL = 15 pF, See Figure 2 | 6 | |
| Output Fall Time (5 V) | tf | 2.8 | 3.7 | ns | CL = 15 pF, See Figure 2 | 6 | |
| Common Mode Transient Immunity | CMTI | 25 | kV/µs | VI = VDD or 0 V | 6 | ||
| Enable to Data Valid | ten1 | 5 | 8 | ns | See Figure 1 | 6 | |
| Enable to Data Tri-State | ten2 | 7 | 9.2 | ns | See Figure 1 | 6 | |
| Start-up Time | tSU | 15 | 40 | µs | 6 | ||
| High Level Output Voltage (3.3 V) | VOH | 3.1 | V | Ioh = -4 mA; min printed as VDD1,VDD2, 0.4; VDD = 3.3 V ±10% | 8 | ||
| Output Rise Time (3.3 V) | tr | 4.3 | 6.1 | ns | CL = 15 pF, See Figure 2 | 10 | |
| Output Fall Time (3.3 V) | tf | 3 | 4.3 | ns | CL = 15 pF, See Figure 2 | 10 | |
| High Level Output Voltage (2.70 V) | VOH | 2.3 | V | Ioh = -4 mA; min printed as VDD1,VDD2, 0.4; VDD = 2.70 V | 11 | ||
| Output Rise Time (2.70 V) | tr | 4.8 | 6.5 | ns | CL = 15 pF, See Figure 2 | 13 | |
| Output Fall Time (2.70 V) | tf | 3.2 | 4.6 | ns | CL = 15 pF, See Figure 2 | 13 | |
| Junction-to-Air Thermal Resistance (WB SOIC-16) | θJA | 100 | ºC/W | WB SOIC-16 | 16 | ||
| Junction-to-Air Thermal Resistance (NB SOIC-16) | θJA | 105 | ºC/W | NB SOIC-16 | 16 |
CAD (KiCad official)
- Symbol:
SI8442AB-D-IS - Footprint:
Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm - 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files:
si8442ab-d-is-etched.step/si8442ab-d-is-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);si8442ab-d-is.step/si8442ab-d-is.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Skyworks Solutions datasheet (36 pp, sha256
b2562992805393be, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).