3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownZXCT1082E5TA
Diodes Incorporated · Current Sense Amplifiers · SOT-25
ZXCT1082E5TA from Diodes Incorporated, in a SOT-25. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT | output | Output pin providing current output proportional to sensed differential voltage; for ZXCT1082/3 variants, output current = (differential sense voltage / external resistor RG) × internal transconductance. |
| 2 | GND | power_in | Ground pin connecting to device internal ground reference. |
| 3 | S+ | input | Positive input of the current monitor with wide common-mode input range of 2.7V to 60V; must connect external resistor RGT from S+ to input side (VSUPPLY) of sense resistor; differential input voltage limit ±800 mV. |
| 4 | S− | input | Negative input of the current monitor with wide common-mode input range of 2.7V to 60V; must connect external resistor RGT from S− to load side (VLOAD) of sense resistor; differential input voltage limit ±800 mV. |
| 5 | VCC | power_in | Analogue supply pin providing power to internal circuitry with recommended operating voltage range of 2.7V to 60V for ZXCT1082/84/86 variants; quiescent current 0.6 µA typical. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-25 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| S+ input current, TA = FT | IS+ | 5 | µA | TA = FT | 3 | ||
| S- input current, TA = FT | IS- | 5 | µA | TA = FT | 3 | ||
| Input offset voltage | VIO | -1 | 0.2 | 1 | mV | VSENSE = 0mV (ZXCT1082/3/4/5), TA = 25°C | 3 |
| Input offset voltage, TA = FT | VIO | -2.5 | 2.5 | mV | ZXCT1082/3/4/5, TA = FT | 3 | |
| Input offset voltage temperature co-efficient | VIO | -4 | 4 | µV/K | 3 | ||
| Transconductance error | GT-ERR | -1 | 1 | % | 3 | ||
| Transconductance error, TA = FT | GT-ERR | -2 | 2 | % | TA = FT | 3 | |
| Transconductance temperature co-efficient | GT-TC | 10 | nA/K | TA = FT | 3 | ||
| Output relative to common mode, VS- (relative to VLOAD) | VOUTH | -1 | -0.8 | V | ZXCT1082/3; value relative to VLOAD (printed VLOAD - 1 / VLOAD - 0.8) | 3 | |
| VCC supply current, TA = FT | ICC | 2 | µA | VSENSE = 0V, TA = FT | 4 | ||
| VCC supply rejection ratio (ZXCT1082/4, 60V) | PSRR | 80 | 100 | dB | VSENSE = 60mV; VCC = 2.7V to 60V | 4 | |
| VCC supply rejection ratio, TA = FT (ZXCT1082/4, 60V) | PSRR | 75 | dB | TA = FT | 4 | ||
| Common-mode sense rejection ratio (ZXCT1082/4, 60V) | CMRR | 80 | 100 | dB | ZXCT1082/4: VSENSE = 60mV; VS+ = 2.7V to 60V | 4 | |
| Common-mode sense rejection ratio, TA = FT | CMRR | 80 | dB | TA = FT | 4 | ||
| S+ input current | IS+ | 1.7 | µA | VSENSE = 0mV (Note 1), TA = 25°C | 3 | ||
| S- input current | IS- | 1.7 | µA | VSENSE = 0mV (Note 1), TA = 25°C | 3 | ||
| Transconductance ZXCT1082/3 | GT | 200 | µA/V | VSENSE = 10mV to 150mV (Note 1, 3) | 3 | ||
| Output impedance ZXCT1082/3 | ZOUT | 1 | GΩ | ZXCT1082/3; printed 1//5 GΩ//pF (parallel with 5 pF) | 3 | ||
| VCC supply current | ICC | 0.6 | µA | VSENSE = 0V, TA = 25°C | 4 | ||
| -3dB small signal bandwidth, G = 25 | BW | 500 | kHz | VSENSE(AC) = 10mVPP; G = 25 | 4 | ||
| -3dB small signal bandwidth, G = 50 | BW | 200 | kHz | VSENSE(AC) = 10mVPP; G = 50 | 4 | ||
| Settling time (0.1%), G = 25 | ts(0.1%) | 5 | µs | VSENSE = 50mV to 300mV step; G = 25 | 4 | ||
| Settling time (0.1%), G = 50 | ts(0.1%) | 7 | µs | VSENSE = 50mV to 200mV step; G = 50 | 4 | ||
| Output noise current density | iN-OUT | 12 | pA/√Hz | f = 1kHz, ZXCT1082/3 | 4 | ||
| Output noise current density | iN-OUT | 10 | pA/√Hz | f = 10kHz, ZXCT1082/3 | 4 | ||
| Total output noise current | iN-OUT | 3 | nARMS | f = 0.1Hz to 100kHz | 4 | ||
| Voltage on S- and S+ (ZXCT1082/84/86) | VS+, VS- | -0.3 | 65 | V | ZXCT1082, ZXCT1084, ZXCT1086 | 2 | |
| Voltage on VCC (ZXCT1082/84/86) | VCC | -0.3 | 65 | V | ZXCT1082, ZXCT1084, ZXCT1086 | 2 | |
| Voltage on OUT | VOUT | -0.3 | V | maximum is VS- (printed as VS-) | 2 | ||
| Differential input voltage VS+ - VS- | VS+ - VS- | -800 | 800 | mV | Input current limit into S+ or S- must not be exceeded | 2 | |
| Input current into S+ or S- | IS+, IS- | -12 | 12 | mA | 2 | ||
| Storage temperature | TSTG | -55 | 150 | °C | 2 | ||
| Maximum junction temperature | TJ | 150 | °C | 2 | |||
| Package power dissipation | PD | 300 | mW | TA = 25°C; de-rate to zero at 150°C | 2 | ||
| ESD rating, Human Body Model | ESD HBM | 2 | kV | Human Body Model | 2 | ||
| ESD rating, Machine Model | ESD MM | 200 | V | Machine Model | 2 | ||
| Common-mode input range (ZXCT1082/84/86) | VIN | 2.7 | 60 | V | ZXCT1082/1084/1086 | 2 | |
| Supply voltage range (ZXCT1082/84/86) | VCC | 2.7 | 60 | V | ZXCT1082/1084/1086 | 2 | |
| Differential sense input voltage range | VSENSE | 0 | 0.5 | V | 2 | ||
| Output voltage range | VOUT | 0 | V | maximum is VS- -1 (printed as VS- -1) | 2 | ||
| Ambient temperature range | TA | -40 | 125 | °C | 2 |
CAD (KiCad official)
- Symbol:
ZXCT1082E5TA - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-25 (KiCad packages3D, STEP)
- 3D model files:
zxct1082e5ta-etched.step/zxct1082e5ta-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);zxct1082e5ta.step/zxct1082e5ta.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (13 pp, sha256
8f530f6ea2fd9f55, retrieved 2026-09-22, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).