3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownOPA521IRGWR
Texas Instruments · Operational Amplifier · VQFN-20-EP(5x5)
OPA521IRGWR from Texas Instruments, in a VQFN-20-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | V+ | power_in | Positive power supply; the datasheet gives a recommended supply range of 7 V to 24 V and an absolute maximum of 26 V. |
| 2 | NC | unconnected | No internal connection. |
| 3 | NC | unconnected | No internal connection. |
| 4 | NC | unconnected | No internal connection. |
| 5 | NC | unconnected | No internal connection. |
| 6 | NC | unconnected | No internal connection. |
| 7 | -IN | input | Inverting input; with the internal feedback network it sets the closed-loop gain to -7 V/V, and an external resistor between GAIN_SET and -IN raises the gain beyond -7 V/V. |
| 8 | GAIN_SET | input | Connect an external resistor between GAIN_SET and -IN to increase the gain beyond -7 V/V. |
| 9 | +IN | input | Non-inverting input; connect to a voltage equal to (V+)/2. |
| 10 | NC | unconnected | No internal connection. |
| 11 | EN | input | Enables the amplifier when high (active high); a low level disables the amplifier and places the output in a high-impedance state. |
| 12 | ILIM | input | Resistor-programmable output current limit; the resistor is connected between ILIM and ground, and ILIM grounded gives the maximum output current. |
| 13 | IFLAG | output | Current-limit warning flag; open-drain, active high, high signifies a current-limit condition. |
| 14 | TFLAG | output | Thermal-limit warning flag; open-drain, active high, high signifies a thermal-limit condition. |
| 15 | IQSET | input | Quiescent current select, active high; high configures FCC/ARIB operation and low configures CENELEC Bands A, B, C, D operation. |
| 16 | GND | power_in | Ground; one of two ground pins provided for the high currents associated with driving the AC mains. |
| 17 | GND | power_in | Ground; one of two ground pins provided for the high currents associated with driving the AC mains. |
| 18 | VOUT | output | Amplifier output; voltage limited to (V+) + 0.4 V maximum and continuous short-circuit current to GND is permitted. |
| 19 | VOUT | output | Amplifier output; voltage limited to (V+) + 0.4 V maximum and continuous short-circuit current to GND is permitted. |
| 20 | V+ | power_in | Positive power supply; the datasheet gives a recommended supply range of 7 V to 24 V and an absolute maximum of 26 V. |
| 21 | Thermal Pad | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-20-EP(5x5) |
| Category | Amplifiers/Comparators |
| Pins | 21 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage, V+ (pins 1, 20) | V+ | 26 | V | Pins 1, 20 | 4 | ||
| Signal input voltage (pins 7, 8, 9, 12) | -0.4 | V | Pins 7, 8, 9, 12; max printed as (V+) + 0.4 | 4 | |||
| Signal input voltage (pins 11, 15) | -0.4 | 3.3 | V | Pins 11, 15 | 4 | ||
| Signal input current (pins 7, 8, 9, 11, 12, 15) | -10 | 10 | mA | Pins 7, 8, 9, 11, 12, 15 | 4 | ||
| Signal output voltage (pins 18, 19) | -0.4 | V | Pins 18, 19; max printed as (V+) + 0.4 | 4 | |||
| Signal output voltage (pins 13, 14) | -0.4 | 3.3 | V | Pins 13, 14 | 4 | ||
| Operating junction temperature | TJ | -40 | 125 | °C | 4 | ||
| Storage temperature | Tstg | -55 | 150 | °C | 4 | ||
| Supply voltage, V+ | V+ | 7 | 24 | V | 4 | ||
| Output current, DC | 1.9 | A | 4 | ||||
| Operating junction temperature | TJ | -40 | 125 | °C | 4 | ||
| Junction-to-ambient thermal resistance | RθJA | 33 | °C/W | RGW (QFN), 20 pins | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 24.4 | °C/W | RGW (QFN), 20 pins | 4 | ||
| Junction-to-board thermal resistance | RθJB | 12.7 | °C/W | RGW (QFN), 20 pins | 4 | ||
| Junction-to-top characterization parameter | ΨJT | 0.3 | °C/W | RGW (QFN), 20 pins | 4 | ||
| Junction-to-board characterization parameter | ΨJB | 12.7 | °C/W | RGW (QFN), 20 pins | 4 | ||
| Junction-to-case (bottom) thermal resistance | RθJC(bot) | 3.4 | °C/W | RGW (QFN), 20 pins | 4 | ||
| Gain error | GE | -2 | 0.1 | 2 | % | TJ = -40°C to +125°C | 5 |
| Gain error drift | -5 | 5 | ppm/°C | TJ = -40°C to +125°C | 5 | ||
| Power-supply rejection ratio, RTI DC | PSRR | 80 | 94 | dB | RTI, DC | 5 | |
| Voltage output swing from V+ | VO | 0.5 | V | IO = 200-mA sourcing, 1-ms pulse | 5 | ||
| Voltage output swing from V+ | VO | 2.25 | V | IO = 1.5-A sourcing, 1-ms pulse | 5 | ||
| Voltage output swing from GND | VO | 0.5 | V | IO = 200 mA sinking, 1-ms pulse | 5 | ||
| Voltage output swing from GND | VO | 1.5 | V | IO = 1.5-A sinking, 1-ms pulse | 5 | ||
| Max output current, resistor-selectable | 2.5 | A | ILIM (pin 12) connected to ground | 5 | |||
| Leakage input current | -1 | 0.01 | 1 | µA | GND ≤ VIN ≤ 3.3 | 6 | |
| High-level input voltage | VIH | 2 | 3.3 | V | 6 | ||
| Low-level input voltage | VIL | 0.8 | V | 6 | |||
| High-level output current | IOH | 1 | µA | VOH = 3.3 V | 6 | ||
| Low-level output voltage | VOL | 0.4 | V | IOL = 4 mA | 6 | ||
| Low-level output current | IOL | 4 | mA | VOL = 400 mV | 6 | ||
| TFLAG pin high (sink current) | 1 | µA | Device is in thermal shutdown | 6 | |||
| TFLAG pin low | TFLAG | 0.4 | V | Device is not in thermal shutdown | 6 | ||
| IFLAG pin high (sink current) | 1 | µA | Device is in current limit | 6 | |||
| IFLAG pin low | IFLAG | 0.4 | V | Device is not in current limit | 6 | ||
| Enable time | 3 | ms | SD pin transitions from low to high | 6 | |||
| Disable time | 2 | ms | SD pin transitions from high to low | 6 | |||
| Operating supply range, power amplifier | V+ | 7 | 15 | 24 | V | Power amplifier | 6 |
| Quiescent current, FCC/ARIB mode | IQ | 64 | 78 | 88 | mA | IO = 0 A, IQSET pin high | 6 |
| Quiescent current, CENELEC mode | IQ | 41 | 51 | 61 | mA | IO = 0 A, IQSET pin low | 6 |
| Shutdown quiescent current | IQ | 58 | 130 | µA | EN pin low | 6 |
CAD (KiCad official)
- Symbol:
OPA521IRGWR - Footprint:
Package_DFN_QFN:QFN-20-1EP_5x5mm_P0.65mm_EP3.35x3.35mm - 3D model: VQFN-20-EP(5x5) (KiCad packages3D, STEP)
- 3D model files:
opa521irgwr-etched.step/opa521irgwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa521irgwr.step/opa521irgwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (33 pp, sha256
c204c6b1c4cd438a, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).