component
7D026000H01
Public Made by Adomby adom
HD Crystals, SMD2016-4P. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdown7D026000H01
HD · Crystals · SMD2016-4P
7D026000H01 from HD, in a SMD2016-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CRYSTAL | passive | Crystal resonator terminal for the 26.000MHz fundamental-mode unit, specified with 9pF load capacitance and 50 ohms max resonance resistance. |
| 2 | GND | power_in | Ground pad, connected as shown in the internal view connection diagram. |
| 3 | CRYSTAL | passive | Second crystal resonator terminal for the 26.000MHz fundamental-mode unit, specified with 9pF load capacitance and 50 ohms max resonance resistance. |
| 4 | GND | power_in | Ground pad, connected as shown in the internal view connection diagram. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HD |
| Package | SMD2016-4P |
| Category | Crystals, Oscillators, Resonators |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Frequency temperature stability (per printed ±20ppm) | △f/f | -20 | 20 | ppm | 1 | ||
| Frequency tolerance | △f/f | -10 | 10 | ppm | 1 | ||
| Aging | △fA | -3 | 3 | ppm/Year | Max, as printed | 1 | |
| Insulation resistance | IR | 500 | MΩ | 1 | |||
| Resonance resistance | 50 | ohm | Fundamental mode | 1 | |||
| Shunt capacitance | C0 | 2 | pF | 1 | |||
| Drive level | DL | 100 | μW | 1 | |||
| Operating temperature range | TOPR | -20 | 70 | °C | 1 | ||
| Storage temperature range | TSTG | -55 | 125 | °C | 1 | ||
| Nominal frequency | f | 26 | MHz | Fundamental mode | 1 | ||
| Load capacitance | CL | 9 | pF | 1 | |||
| Frequency change after drop test | -5 | 5 | ppm | Free drop 75cm on hard wooden board, 3 times | 2 | ||
| Frequency change after mechanical shock | -5 | 5 | ppm | Half sine 1000g, 3 axes, 3 times each | 2 | ||
| Frequency change after shake test | -5 | 5 | ppm | 10~55Hz, swing 1.5mm, x/y/z, 30 min | 2 | ||
| Frequency change after humidity test | -5 | 5 | ppm | +40±2℃, 90%~95% R.H., 250 hours | 2 | ||
| Frequency change after low temperature test | -5 | 5 | ppm | -40±2℃, 250 hours | 2 | ||
| Frequency change after high temperature test | -5 | 5 | ppm | +85±2℃, 250 hours | 2 | ||
| Frequency change after temperature cycling | -5 | 5 | ppm | -30±3℃/30 min to +85±2℃/30 min, 5 cycles | 2 | ||
| Frequency change after reflow | -5 | 5 | ppm | Reflow examination | 2 |
CAD (KiCad official)
- Symbol:
7D026000H01 - Footprint:
Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm - 3D model: SMD2016-4P (KiCad packages3D, STEP)
- 3D model files:
7d026000h01-etched.step/7d026000h01-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);7d026000h01.step/7d026000h01.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HD datasheet (4 pp, sha256
52f50b83a2996ecf, retrieved 2026-10-16, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).