Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PIC18F4450-I

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-44(10x10)

PIC18F4450-I from Microchip Tech, in a TQFP-44(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RC7/RX/DT bidirectional PORTC digital I/O (Schmitt Trigger), EUSART asynchronous receive input or synchronous data I/O.
2 RD4 bidirectional PORTD bidirectional digital I/O with Schmitt Trigger input.
3 RD5 bidirectional PORTD bidirectional digital I/O with Schmitt Trigger input.
4 RD6 bidirectional PORTD bidirectional digital I/O with Schmitt Trigger input.
5 RD7 bidirectional PORTD bidirectional digital I/O with Schmitt Trigger input.
6 VSS power_in Ground reference for logic and I/O pins.
7 VDD power_in Positive supply for logic and I/O pins.
8 RB0/AN12/INT0 bidirectional PORTB digital I/O (TTL, weak pull-up), analog input 12 or external interrupt 0.
9 RB1/AN10/INT1 bidirectional PORTB digital I/O (TTL, weak pull-up), analog input 10 or external interrupt 1.
10 RB2/AN8/INT2/VMO bidirectional PORTB digital I/O, analog input 8, external interrupt 2 or external USB transceiver VMO output.
11 RB3/AN9/VPO bidirectional PORTB digital I/O, analog input 9 or external USB transceiver VPO output.
12 NC/ICCK/ICPGC bidirectional No connect unless ICPRT is set; then dedicated ICD/ICSP port clock (ICCK in-circuit debugger clock, ICPGC programming clock).
13 NC/ICDT/ICPGD bidirectional No connect unless ICPRT is set; then dedicated ICD/ICSP port data (ICDT debugger data, ICPGD programming data).
14 RB4/AN11/KBI0 bidirectional PORTB digital I/O, analog input 11 or interrupt-on-change pin.
15 RB5/KBI1/PGM bidirectional PORTB digital I/O, interrupt-on-change pin or low-voltage ICSP programming enable pin.
16 RB6/KBI2/PGC bidirectional PORTB digital I/O, interrupt-on-change pin or in-circuit debugger and ICSP programming clock pin.
17 RB7/KBI3/PGD bidirectional PORTB digital I/O, interrupt-on-change pin or in-circuit debugger and ICSP programming data pin.
18 MCLR/VPP/RE3 input Active-low Master Clear (Reset) input, programming voltage input, or digital input RE3 when MCLR is disabled.
19 RA0/AN0 bidirectional PORTA digital I/O (TTL) or analog input 0.
20 RA1/AN1 bidirectional PORTA digital I/O (TTL) or analog input 1.
21 RA2/AN2/VREF- bidirectional PORTA digital I/O, analog input 2 or A/D reference voltage (low) input.
22 RA3/AN3/VREF+ bidirectional PORTA digital I/O, analog input 3 or A/D reference voltage (high) input.
23 RA4/T0CKI/RCV bidirectional PORTA digital I/O, Timer0 external clock input or external USB transceiver RCV input.
24 RA5/AN4/HLVDIN bidirectional PORTA digital I/O, analog input 4 or High/Low-Voltage Detect input.
25 RE0/AN5 bidirectional PORTE digital I/O (Schmitt Trigger) or analog input 5.
26 RE1/AN6 bidirectional PORTE digital I/O (Schmitt Trigger) or analog input 6.
27 RE2/AN7 bidirectional PORTE digital I/O (Schmitt Trigger) or analog input 7.
28 VDD power_in Positive supply for logic and I/O pins.
29 VSS power_in Ground reference for logic and I/O pins.
30 OSC1/CLKI input Oscillator crystal input or external clock source input.
31 OSC2/CLKO/RA6 bidirectional Oscillator crystal output, CLKO at 1/4 the OSC1 frequency in select modes, or general purpose I/O RA6.
32 RC0/T1OSO/T1CKI bidirectional PORTC digital I/O, Timer1 oscillator output or Timer1 external clock input.
33 NC/ICRST/ICVPP input No connect unless ICPRT is set; then dedicated ICD/ICSP port Master Clear (Reset) input and programming voltage input.
34 NC/ICPORTS input No connect unless ICPRT is set and DEBUG is cleared; connecting to VSS enables 28-pin device emulation.
35 RC1/T1OSI/UOE bidirectional PORTC digital I/O, Timer1 oscillator input or external USB transceiver OE output.
36 RC2/CCP1 bidirectional PORTC digital I/O or Capture 1 input/Compare 1 output/PWM1 output.
37 VUSB power_out Internal USB 3.3V voltage regulator output; positive supply for the internal USB transceiver.
38 RD0 bidirectional PORTD bidirectional digital I/O with Schmitt Trigger input.
39 RD1 bidirectional PORTD bidirectional digital I/O with Schmitt Trigger input.
40 RD2 bidirectional PORTD bidirectional digital I/O with Schmitt Trigger input.
41 RD3 bidirectional PORTD bidirectional digital I/O with Schmitt Trigger input.
42 RC4/D-/VM bidirectional Digital input, USB differential minus line (input/output) or external USB transceiver VM input.
43 RC5/D+/VP bidirectional Digital input, USB differential plus line (input/output) or external USB transceiver VP input.
44 RC6/TX/CK bidirectional PORTC digital I/O, EUSART asynchronous transmit or synchronous clock.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package TQFP-44(10x10)
Category Single Chip Microcomputer/Microcontroller
Pins 44

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage (HSPLL, XTPLL, ECPIO, ECPLL modes) VDD 3 5.5 V HSPLL, XTPLL, ECPIO and ECPLL Oscillator modes 271
Supply Voltage (EC, HS, XT, Internal modes) VDD 2 5.5 V EC, HS, XT and Internal Oscillator modes 271
RAM Data Retention Voltage VDR 1.5 V 271
VDD Start Voltage to ensure internal Power-on Reset VPOR 0.7 V See Section 4.3 271
VDD Rise Rate to Ensure Internal Power-on Reset SVDD 0.05 V/ms See Section 4.3 271
Brown-out Reset Voltage VBOR 2 2.11 2.22 V BORV1:BORV0 = 11 271
Brown-out Reset Voltage VBOR 2.65 2.79 2.93 V BORV1:BORV0 = 10 271
Brown-out Reset Voltage VBOR 4.11 4.33 4.55 V BORV1:BORV0 = 01 271
Brown-out Reset Voltage VBOR 4.36 4.59 4.82 V BORV1:BORV0 = 00 271
Power-Down Current (Sleep) IPD 0.1 19 μA All devices, -40°C, VDD = 5.0V, Sleep mode 272
Power-Down Current (Sleep) IPD 0.1 2 μA All devices, +25°C, VDD = 5.0V, Sleep mode 272
Power-Down Current (Sleep) IPD 2.5 15 μA All devices, +85°C, VDD = 5.0V, Sleep mode 272
Supply Current RC_RUN IDD 95 168 μA All devices, -40°C, VDD = 5.0V, FOSC = 31 kHz (RC_RUN mode, INTRC source) 273
Supply Current RC_RUN IDD 75 160 μA All devices, +25°C, VDD = 5.0V, FOSC = 31 kHz (RC_RUN mode, INTRC source) 273
Supply Current RC_RUN IDD 65 152 μA All devices, +85°C, VDD = 5.0V, FOSC = 31 kHz (RC_RUN mode, INTRC source) 273
Supply Current RC_IDLE IDD 6.5 16 μA All devices, -40°C, VDD = 5.0V, FOSC = 31 kHz (RC_IDLE mode, INTRC source) 273
Supply Current RC_IDLE IDD 7 16 μA All devices, +25°C, VDD = 5.0V, FOSC = 31 kHz (RC_IDLE mode, INTRC source) 273
Supply Current RC_IDLE IDD 9 36 μA All devices, +85°C, VDD = 5.0V, FOSC = 31 kHz (RC_IDLE mode, INTRC source) 273
Input Low Voltage, I/O Ports with TTL Buffer VIL 0.8 V 4.5V ≤ VDD ≤ 5.5V 280
Input Low Voltage, I/O Ports with TTL Buffer (D030, max 0.15 VDD) VIL 0.15 VDD VDD < 4.5V; max printed as 0.15 VDD 280
Input Low Voltage MCLR (max 0.2 VDD) VIL 0.2 VDD max printed as 0.2 VDD 280
Input Low Voltage OSC1 and T1OSI (max 0.3 VDD) VIL 0.3 VDD XT, HS, HSPLL modes 280
Input Low Voltage OSC1 (max 0.2 VDD) VIL 0.2 VDD EC mode 280
Input High Voltage, I/O Ports with TTL Buffer VIH 2 V 4.5V ≤ VDD ≤ 5.5V (max printed as VDD) 280
Input High Voltage MCLR (min 0.8 VDD) VIH 0.8 1 VDD min printed as 0.8 VDD, max VDD 280
Input High Voltage OSC1 and T1OSI (min 0.7 VDD) VIH 0.7 1 VDD XT, HS, HSPLL modes 280
Input High Voltage OSC1 (min 0.8 VDD) VIH 0.8 1 VDD EC mode 280
Input Leakage Current, I/O Ports IIL -200 200 nA VDD = 5V 280
Input Leakage Current, I/O Ports IIL -50 50 nA VDD = 3V 280
Input Leakage Current MCLR IIL -1 1 μA Vss ≤ VPIN ≤ VDD 280
Input Leakage Current OSC1 IIL -1 1 μA Vss ≤ VPIN ≤ VDD 280
PORTB Weak Pull-up Current IPURB 50 400 μA VDD = 5V, VPIN = VSS 280
Ambient temperature under bias -40 85 °C 269
Storage temperature -65 150 °C 269
Voltage on any pin with respect to VSS (except VDD and MCLR) -0.3 V max is VDD + 0.3V 269
Voltage on VDD with respect to VSS VDD -0.3 7.5 V 269
Voltage on MCLR with respect to VSS 0 13.25 V Note 2 269
Total power dissipation 1 W Note 1 269
Input clamp current IIK -20 20 mA VI < 0 or VI > VDD 269
Output clamp current IOK -20 20 mA VO < 0 or VO > VDD 269
Operating temperature (industrial) TA -40 85 °C industrial 271

CAD (KiCad official)

  • Symbol: PIC18F4450-I
  • Footprint: Package_QFP:TQFP-44_10x10mm_P0.8mm
  • 3D model: TQFP-44(10x10) (KiCad packages3D, STEP)
  • 3D model files: pic18f4450-i-etched.step / pic18f4450-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic18f4450-i.step / pic18f4450-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (324 pp, sha256 9b1d5136ad16e99a, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF