Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MCP14A0151T-E/CH

Microchip Tech · Gate Drive ICs · SOT-23-6

MCP14A0151T-E from Microchip Tech, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Bias supply input for the MOSFET driver with a 4.5V to 18V range, which must be decoupled to ground with a local capacitor (1.0 µF and 0.1 µF recommended).
2 AGND power_in Analog ground, the return for the input and enable stages, to be connected to an electrically quiet ground node as a low-noise reference for IN and EN.
3 IN input High-impedance TTL/CMOS compatible control input (2V to 18V logic) with hysteresis (typ. 0.4V); the MCP14A0151 output is inverting with respect to this pin.
4 EN input Active-high TTL/CMOS compatible device enable with hysteresis and an internal pull-up resistor (typ. 1.8 MΩ), so it can be left floating; driving it low pulls OUT low regardless of IN.
5 GND power_in Power ground, the return for the output stage, which carries high peak discharge currents and needs a low-impedance connection to the bias supply return.
6 OUT output CMOS push-pull output (inverting for MCP14A0151) that sources and sinks 1.5A peak at VDD = 18V, with a 500 mA reverse current latch-up rating.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOT-23-6
Category Power Supply Chip
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VDD 4.5 18 V 4
Input Current IIN -1 1 µA 0V ≤ VIN ≤ VDD, TA = +25°C 3
Input Current (over temp) IIN -10 10 µA 0V ≤ VIN ≤ VDD, over operating range 4
Logic 1 High Input Voltage VIH 2 1.6 V TA = +25°C 3
Logic 0 Low Input Voltage VIL 1.2 0.8 V TA = +25°C 3
Logic 1 High Enable Voltage VEH 2 1.6 V TA = +25°C 3
Logic 0 Low Enable Voltage VEL 1.2 0.8 V TA = +25°C 3
Propagation Delay (enable) tD3 34 41 ns VDD = 18V, VEN = 5V, see Figure 4-3 3
Propagation Delay (enable) tD4 23 30 ns VDD = 18V, VEN = 5V, see Figure 4-3 3
Low Output Voltage VOL 0.025 V IOUT = 0A 3
Output Resistance, High ROH 4.5 6.5 Ω IOUT = 10 mA, VDD = 18V 3
Output Resistance, Low ROL 3 4.5 Ω IOUT = 10 mA, VDD = 18V 3
Latch-Up Protection Withstand Reverse Current IREV 0.5 A Duty cycle ≤ 2%, t ≤ 300 µs 3
Rise Time tR 11.5 18.5 ns VDD = 18V, CL = 1000 pF 3
Fall Time tF 10 17 ns VDD = 18V, CL = 1000 pF 3
Delay Time tD1 33 40 ns VDD = 18V, VIN = 5V 4
Delay Time tD2 24 31 ns VDD = 18V, VIN = 5V 4
Power Supply Current IDD 330 560 µA VIN = 3V, VEN = 3V 4
Power Supply Current IDD 360 580 µA VIN = 0V, VEN = 3V 4
Power Supply Current IDD 375 600 µA VIN = 0V, VEN = 0V 4
Propagation Delay (enable, over temp) tD3 32 39 ns VDD = 18V, VEN = 5V, TA = +125°C 4
Propagation Delay (enable, over temp) tD4 25 32 ns VDD = 18V, VEN = 5V, TA = +125°C 4
Low Output Voltage (over temp) VOL 0.025 V DC Test 4
Output Resistance, High (over temp) ROH 9 Ω IOUT = 10 mA, VDD = 18V 4
Output Resistance, Low (over temp) ROL 6.5 Ω IOUT = 10 mA, VDD = 18V 4
Rise Time (over temp) tR 14 21 ns VDD = 18V, CL = 1000 pF, TA = +125°C 5
Fall Time (over temp) tF 13 20 ns VDD = 18V, CL = 1000 pF, TA = +125°C 5
Delay Time (over temp) tD1 31 38 ns VDD = 18V, VIN = 5V, TA = +125°C 5
Delay Time (over temp) tD2 26 33 ns VDD = 18V, VIN = 5V, TA = +125°C 5
Power Supply Current (over temp) IDD 760 uA VIN = 3V, VEN = 3V 5
Power Supply Current (over temp) IDD 780 uA VIN = 0V, VEN = 3V 5
Power Supply Current (over temp) IDD 800 uA VIN = 0V, VEN = 0V 5
Specified Temperature Range TA -40 125 °C 5
Maximum Junction Temperature TJ 150 °C 5
Storage Temperature Range TA -65 150 °C 5
Supply Voltage (absolute maximum) VDD 20 V 3
Thermal Resistance, 6LD SOT-23 θJA 192 °C/W 5
Input Voltage Hysteresis VHYST(IN) 0.4 V TA = +25°C 3
Enable Voltage Hysteresis VHYST(EN) 0.4 V TA = +25°C 3
Enable Pin Pull-Up Resistance RENBL 1.8 MΩ VDD = 18V, ENB = AGND 3
Enable Input Current IEN 10 µA VDD = 18V, ENB = AGND 3
Enable Input Current (over temp) IEN 12 µA VDD = 18V, ENB = AGND 4
Peak Output Current IPK 1.5 A VDD = 18V 3

CAD (KiCad official)

  • Symbol: MCP14A0151T-E
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: mcp14a0151t-e-etched.step / mcp14a0151t-e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mcp14a0151t-e.step / mcp14a0151t-e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (24 pp, sha256 f7ff7fe1d14e41a2, retrieved 2026-10-26, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

Other parts in this family

This page is MCP14A0151T-E/CH. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:

  • MCP14A0151T-E/MAY