Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ISL21010CFH333Z-TK

RENESAS ELECTRONICS CORPORATION · Global Sourcing Parts · SOT-23-3

ISL21010CFH333Z-TK from RENESAS ELECTRONICS CORPORATION, in a SOT-23-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 VIN power_in Input voltage connection; for the ISL21010-33 (3.3V output) option the supply range is 3.4V to 5.5V.
2 VOUT power_out Voltage reference output, rated for up to 25mA output current sourcing, with VOUT to GND (10s) limited to -0.5V to VIN +0.5V.
3 GND power_in Ground connection.

Key specifications

Parameter Value
Manufacturer RENESAS ELECTRONICS CORPORATION
Package SOT-23-3
Category Global Sourcing Parts
Pins 3

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VOUT Accuracy at TA = +25°C VOA -0.2 0.2 % TA = +25°C (Note 11) 8
Output Voltage Temperature Coefficient TC VOUT 15 50 ppm/°C 8
Input Voltage Range VIN 3.4 5.5 V 8
Supply Current IIN 48 80 µA TA = +25°C 8
Supply Current IIN 100 µA TA = -40°C to +125°C 8
Line Regulation VOUT/VIN 80 320 µV/V 3.4 V < VIN < 5.5V 8
Load Regulation (sourcing) VOUT/IOUT 45 110 µV/mA Sourcing: 0mA ≤ IOUT ≤ 25mA 8
Load Regulation (sinking) VOUT/IOUT 10 µV/mA Sinking: -1mA ≤ IOUT ≤ 0mA 8
Dropout Voltage VINDO 60 150 mV IOUT = 10mA 8
Short-Circuit Current ISC 126 mA TA = +25°C, VOUT tied to GND 8
Turn-On Settling Time tR 300 µs VOUT = ±0.1%, COUT = 1μF 8
Ripple Rejection PSRR 61 dB f = 120Hz 8
Output Voltage Noise eN 95 µVP-P 0.1Hz ≤ f ≤ 10Hz 8
Broadband Voltage Noise VN 40 µVRMS 10Hz ≤ f ≤ 1kHz 8
Thermal Hysteresis VOUT/TA 100 ppm TA = +165°C 8
Long Term Stability VOUT/t 50 ppm 1000 hours, TA = +25°C 8
Output Voltage VOUT 3.3 V 8
VIN to GND VIN -0.5 6.5 V 5
VOUT (pin) to GND VOUT -0.5 V 10s; upper limit printed as VIN +0.5V 5
Input Voltage Slew Rate 1 V/µs 5
Temperature Range (Industrial) -40 125 °C 5
Storage Temperature Range -65 150 °C 5
ESD Human Body Model 5.5 kV 5
ESD Machine Model 300 V 5
ESD Charged Device Model 2 kV 5
Recommended Temperature -40 125 °C 5
Recommended Supply Voltage (VOUT = 3.3V) 3.4 5.5 V VOUT = 3.3V 5
Thermal Resistance Junction-to-Ambient, 3 Ld SOT-23 θJA 275 °C/W Notes 5, 6 5
Thermal Resistance Junction-to-Case, 3 Ld SOT-23 θJC 110 °C/W Notes 5, 6 5

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: ISL21010CFH333Z-TK
  • Footprint: Package_TO_SOT_SMD:SOT-23-3
  • 3D model: SOT-23-3, generated on the KiCad land (body 1.3 x 2.92 mm, terminals on the pads, 1.0 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: isl21010cfh333z-tk-etched.step / isl21010cfh333z-tk-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); isl21010cfh333z-tk.step / isl21010cfh333z-tk.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: RENESAS ELECTRONICS CORPORATION datasheet (37 pp, sha256 c3fcbb4e1bf88185, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF