3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPIC16C57C-04
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-28-208mil
PIC16C57C-04 from Microchip Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VSS | power_in | Ground reference for logic and I/O pins. |
| 2 | T0CKI | input | Clock input to Timer0 (Schmitt Trigger input); must be tied to VSS or VDD if not in use, to reduce current consumption. |
| 3 | VDD | power_in | Positive supply for logic and I/O pins. |
| 4 | VDD | power_in | Positive supply for logic and I/O pins. |
| 5 | RA0 | bidirectional | Bi-directional TTL I/O port pin (PORTA bit 0). |
| 6 | RA1 | bidirectional | Bi-directional TTL I/O port pin (PORTA bit 1). |
| 7 | RA2 | bidirectional | Bi-directional TTL I/O port pin (PORTA bit 2). |
| 8 | RA3 | bidirectional | Bi-directional TTL I/O port pin (PORTA bit 3). |
| 9 | RB0 | bidirectional | Bi-directional TTL I/O port pin (PORTB bit 0). |
| 10 | RB1 | bidirectional | Bi-directional TTL I/O port pin (PORTB bit 1). |
| 11 | RB2 | bidirectional | Bi-directional TTL I/O port pin (PORTB bit 2). |
| 12 | RB3 | bidirectional | Bi-directional TTL I/O port pin (PORTB bit 3). |
| 13 | RB4 | bidirectional | Bi-directional TTL I/O port pin (PORTB bit 4). |
| 14 | VSS | power_in | Ground reference for logic and I/O pins. |
| 15 | RB5 | bidirectional | Bi-directional TTL I/O port pin (PORTB bit 5). |
| 16 | RB6 | bidirectional | Bi-directional TTL I/O port pin (PORTB bit 6). |
| 17 | RB7 | bidirectional | Bi-directional TTL I/O port pin (PORTB bit 7). |
| 18 | RC0 | bidirectional | Bi-directional TTL I/O port pin (PORTC bit 0). |
| 19 | RC1 | bidirectional | Bi-directional TTL I/O port pin (PORTC bit 1). |
| 20 | RC2 | bidirectional | Bi-directional TTL I/O port pin (PORTC bit 2). |
| 21 | RC3 | bidirectional | Bi-directional TTL I/O port pin (PORTC bit 3). |
| 22 | RC4 | bidirectional | Bi-directional TTL I/O port pin (PORTC bit 4). |
| 23 | RC5 | bidirectional | Bi-directional TTL I/O port pin (PORTC bit 5). |
| 24 | RC6 | bidirectional | Bi-directional TTL I/O port pin (PORTC bit 6). |
| 25 | RC7 | bidirectional | Bi-directional TTL I/O port pin (PORTC bit 7). |
| 26 | OSC2/CLKOUT | output | Oscillator crystal output connecting to a crystal or resonator in crystal oscillator mode; in RC mode it outputs CLKOUT at 1/4 the OSC1 frequency, denoting the instruction cycle rate. |
| 27 | OSC1/CLKIN | input | Oscillator crystal input or external clock source input (Schmitt Trigger input). |
| 28 | MCLR | input | Master clear (RESET) input; an active low RESET to the device (Schmitt Trigger input). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SSOP-28-208mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
PIC16C57C-04 - Footprint:
Package_SO:SSOP-28_5.3x10.2mm_P0.65mm - 3D model: SSOP-28-208mil, generated on the KiCad land (body 5.25 x 10.2 mm, terminals on the pads, 1.85 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
pic16c57c-04-ss-etched.step/pic16c57c-04-ss-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16c57c-04-ss.step/pic16c57c-04-ss.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (192 pp, sha256
cd193beed4e3e72c, retrieved 2026-11-21) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).