3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMIC29302AWU
Microchip Tech · Linear Voltage Regulators (LDO) · TO-263-5
MIC29302AWU from Microchip Tech, in a TO-263-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Enable input is an active-high TTL/CMOS-compatible control input and must not float. |
| 2 | IN | power_in | Unregulated input with a maximum of +3V to +16V. |
| 3 | GND | power_in | Ground pin; the TAB is also connected internally to the IC's ground on both packages. |
| 4 | OUT | power_out | Regulator output voltage. |
| 5 | ADJ | input | Feedback voltage pin with a 1.24V feedback from an external resistor divider. |
| 6 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TO-263-5 |
| Category | Power Supply Chip |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Accuracy | ∆VOUT | -2 | 2 | % | 100 mA ≤ IOUT ≤ 3A, (VOUT + 1V) ≤ VIN ≤ 16V | 3 | |
| Line Regulation | ∆VOUT/∆VIN | 0.1 | 0.5 | % | IOUT = 100 mA, (VOUT + 1V) ≤ VIN ≤ 16V | 3 | |
| Load Regulation | ∆VOUT/∆IOUT | 0.2 | 1 | % | VIN = VOUT + 1V, 100 mA ≤ IOUT ≤ 3A | 3 | |
| Dropout Voltage | VDO | 100 | 200 | mV | IOUT = 100 mA, VIN ≥ 3.184V | 3 | |
| Dropout Voltage | VDO | 560 | 800 | mV | IOUT = 3A, VIN ≥ 3.4V | 3 | |
| Ground Current | IGND | 5 | 20 | mA | IOUT = 750 mA, VIN = VOUT + 1V | 3 | |
| Ground Current | IGND | 60 | 150 | mA | IOUT = 3A | 3 | |
| Current Limit | ILIMIT | 3 | 4 | A | VOUT = 0V, Note 3 | 3 | |
| Reference Voltage | VREF | 1.215 | 1.267 | V | Note 4 | 3 | |
| Adjust Pin Bias Current | IADJ | 40 | 120 | nA | 3 | ||
| Enable Input Logic Voltage, Low (OFF) | VENABLE | 0.8 | V | Low (OFF) | 4 | ||
| Enable Input Logic Voltage, High (ON) | VENABLE | 2.4 | V | High (ON) | 4 | ||
| Enable Pin Input Current | IENABLE | 15 | 30 | µA | VEN = 4.2V | 4 | |
| Enable Pin Input Current | IENABLE | 75 | µA | VEN = 4.2V | 4 | ||
| Enable Pin Input Current | IENABLE | 2 | µA | VEN = 0.8V | 4 | ||
| Enable Pin Input Current | IENABLE | 4 | µA | VEN = 0.8V | 4 | ||
| Regulator Output Current in Shutdown | IOUT-SHDN | 20 | µA | Note 5 | 4 | ||
| Input Supply Voltage | VIN | -20 | 20 | V | 3 | ||
| Enable Input Voltage | VEN | -0.3 | V | Maximum is VIN | 3 | ||
| Operating Input Voltage | 3 | 16 | V | 3 | |||
| Junction Operating Temperature Range | TJ | -40 | 125 | °C | 5 | ||
| Storage Temperature Range | TS | -65 | 150 | °C | 5 | ||
| Thermal Resistance TO-263 junction-to-case | θJC | 3 | °C/W | 5 | |||
| Thermal Resistance TO-263 junction-to-air | θJA | 28 | °C/W | 5 |
CAD (KiCad official)
- Symbol:
MIC29302AWU - Footprint:
Package_TO_SOT_SMD:TO-263-5_TabPin6 - 3D model: TO-263-5 (KiCad packages3D, STEP)
- 3D model files:
mic29302awu-etched.step/mic29302awu-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic29302awu.step/mic29302awu.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (24 pp, sha256
7ab2675814b16914, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).