component
FIN1001M5X
Public Made by Adomby adom
onsemi LVDS ICs, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownFIN1001M5X
onsemi · LVDS ICs · SOT-23-5
FIN1001M5X from onsemi, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Power supply pin; the recommended supply range is 3.0 V to 3.6 V, and the absolute maximum supply voltage is 4.6 V. |
| 2 | GND | power_in | Ground reference pin for the device. |
| 3 | DOUT- | output | Inverting LVDS driver output that goes HIGH when DIN is LOW; it is rated for a typical differential swing of 350 mV into a 100 Ω load and an output current of 16 mA maximum. |
| 4 | DOUT+ | output | Non-inverting LVDS driver output that follows DIN; VOD is specified at 230 mV minimum to 450 mV maximum across -40 °C to +125 °C with RL = 100 Ω. |
| 5 | DIN | input | LVTTL data input with VIH minimum 2.0 V and VIL maximum 0.8 V, and a DC input voltage absolute maximum of 6.0 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | onsemi |
| Package | SOT-23-5 |
| Category | Interface |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC | -0.5 | 4.6 | V | 2 | ||
| DC Input Voltage | DIN | -0.5 | 6 | V | 2 | ||
| DC Output Voltage | DOUT | -0.5 | 4.6 | V | 2 | ||
| Output Current | IO | 16 | mA | 2 | |||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 2 | ||
| Maximum Junction Temperature | TJ | 150 | °C | 2 | |||
| Lead Temperature, Soldering | TL | 260 | °C | Soldering, 10 Seconds | 2 | ||
| Electrostatic Discharge, Human Body Model | ESD | 7500 | V | Human Body Model | 2 | ||
| Electrostatic Discharge, Machine Model | ESD | 400 | V | Machine Model | 2 | ||
| Supply Voltage | VCC | 3 | 3.6 | V | 3 | ||
| Input Voltage | VIN | 0 | V | 3 | |||
| Operating Temperature | TA | -40 | 125 | °C | 3 | ||
| Output Differential Voltage | VOD | 250 | 350 | 450 | mV | RL = 100 Ω, See Figure 2, TA = -40° to 85°C | 3 |
| Output Differential Voltage | VOD | 230 | 350 | 450 | mV | RL = 100 Ω, See Figure 2, TA = -40° to 125°C | 3 |
| VOD Magnitude Change from Differential Low-to-High | ΔVOD | 25 | mV | TA = -40° to 125°C | 3 | ||
| Offset Voltage | VOS | 1.125 | 1.25 | 1.375 | V | 3 | |
| Offset Magnitude Change from Differential Low-to-High | ΔVOS | 25 | mV | 3 | |||
| Power-Off Output Current | IOFF | -20 | 20 | µA | VCC = 0 V, VOUT = 0 V or 3.6 V | 3 | |
| Short Circuit Output Current | IOS | -8 | -5.5 | mA | VOUT = 0 V | 3 | |
| Short Circuit Output Current | IOS | -4 | 4 | mA | VOD = 0 V | 3 | |
| Short Circuit Output Current | IOS | -8 | 8 | mA | VOD = 0 V | 3 | |
| Power-OFF Input Current | II(OFF) | -20 | 20 | µA | VCC = 0 V, VIN = 0 V or 3.6 V | 3 | |
| Input HIGH Voltage | VIH | 2 | V | 3 | |||
| Input LOW Voltage | VIL | 0.8 | V | 3 | |||
| Input Current | IIN | -20 | 20 | µA | VIN = 0 V or VCC | 3 | |
| Power-Off Input Current | II(OFF) | -20 | 20 | µA | VCC = 0V, VIN = 0 V or 3.6 V | 3 | |
| Input Clamp Voltage | VIK | -1.5 | -0.8 | V | IIK = −18 mA | 3 | |
| Power Supply Current | ICC | 4.5 | 8 | mA | No Load, VIN = 0 V or VCC | 3 | |
| Power Supply Current | ICC | 6.5 | 10 | mA | RL = 100 Ω, VIN = 0 V or VCC | 3 | |
| Propagation Delay LOW to HIGH | tPLHD | 0.5 | 0.98 | 1.5 | ns | RL = 100 Ω, CL = 5 pF | 4 |
| Propagation Delay HIGH to LOW | tPHLD | 0.5 | 0.93 | 1.5 | ns | RL = 100 Ω, CL = 5 pF | 4 |
| Differential Output Rise Time | tTLHD | 0.4 | 0.5 | 1 | ns | RL = 100 Ω, CL = 5 pF, 20% to 80% | 4 |
| Output Fall Time | tTHLD | 0.4 | 0.5 | 1 | ns | RL = 100 Ω, CL = 5 pF, 80% to 20% | 4 |
| Pulse Skew /tPLH - tPHL/ | tSK(p) | 0.05 | 0.5 | ns | RL = 100 Ω, CL = 5 pF | 4 | |
| Part-to-Part Skew | tSK(PP) | 1 | ns | RL = 100 Ω, CL = 5 pF | 4 | ||
| Input Capacitance | CIN | 3.2 | pF | VCC = 3.3 V | 3 | ||
| Output Capacitance | COUT | 3.3 | pF | VCC = 0 V | 3 |
CAD (KiCad official)
- Symbol:
FIN1001M5X - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
fin1001m5x-etched.step/fin1001m5x-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);fin1001m5x.step/fin1001m5x.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: onsemi datasheet (10 pp, sha256
9d944b4e9de7e114, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).