Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ST3243CPR

STMicroelectronics · RS232 ICs · SSOP-28

ST3243CPR from STMicroelectronics, in a SSOP-28. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 C2+ passive Positive terminal of the inverting charge pump capacitor.
2 C2- passive Negative terminal of the inverting charge pump capacitor.
3 V- power_out Inverted voltage of -5.5 V generated by the charge pump.
4 R1IN input First RS-232 receiver input, accepting a voltage range of ±25 V.
5 R2IN input Second RS-232 receiver input, accepting a voltage range of ±25 V.
6 R3IN input Third RS-232 receiver input, accepting a voltage range of ±25 V.
7 R4IN input Fourth RS-232 receiver input, accepting a voltage range of ±25 V.
8 R5IN input Fifth RS-232 receiver input, accepting a voltage range of ±25 V.
9 T1OUT output First RS-232 transmitter output, swinging ±5 V minimum into a 3 kΩ load to GND.
10 T2OUT output Second RS-232 transmitter output, swinging ±5 V minimum into a 3 kΩ load to GND.
11 T3OUT output Third RS-232 transmitter output, swinging ±5 V minimum into a 3 kΩ load to GND.
12 T3IN input Third transmitter logic input (TTL/CMOS level), with a maximum input voltage of 6 V.
13 T2IN input Second transmitter logic input (TTL/CMOS level), with a maximum input voltage of 6 V.
14 T1IN input First transmitter logic input (TTL/CMOS level), with a maximum input voltage of 6 V.
15 R5OUT output Fifth receiver logic output, referenced to VCC with a range of -0.3 V to VCC + 0.3 V.
16 R4OUT output Fourth receiver logic output, referenced to VCC with a range of -0.3 V to VCC + 0.3 V.
17 R3OUT output Third receiver logic output, referenced to VCC with a range of -0.3 V to VCC + 0.3 V.
18 R2OUT output Second receiver logic output, referenced to VCC with a range of -0.3 V to VCC + 0.3 V.
19 R1OUT output First receiver logic output, referenced to VCC with a range of -0.3 V to VCC + 0.3 V.
20 R2OUTB output Non-inverting complementary receiver output of R2, always active to provide the serial port wake-up function.
21 INVALID output Output of the valid signal detector; logic 1 indicates a valid RS-232 level is present on the receiver inputs.
22 FORCEOFF input Drive low to shut down the transmitters and the on-board power supply, overriding all automatic circuitry and FORCEON.
23 FORCEON input Drive high to override the automatic circuitry and keep the transmitters on; FORCEOFF must be high.
24 C1- passive Negative terminal of the voltage charge pump capacitor.
25 GND power_in Ground reference for the device.
26 VCC power_in Supply voltage, specified for operation from 3 V to 5.5 V (absolute maximum 6 V).
27 V+ power_out Doubled voltage of 5.5 V generated by the charge pump.
28 C1+ passive Positive terminal of the voltage charge pump capacitor.

Key specifications

Parameter Value
Manufacturer STMicroelectronics
Package SSOP-28
Category Interface
Pins 28

CAD (KiCad official)

  • Symbol: ST3243CPR
  • Footprint: Package_SO:SSOP-28_5.3x10.2mm_P0.65mm
  • 3D model: SSOP-28 (KiCad packages3D, STEP)
  • 3D model files: st3243cpr-etched.step / st3243cpr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); st3243cpr.step / st3243cpr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STMicroelectronics datasheet (18 pp, sha256 1bacb0a9b33761de, retrieved 2026-10-11, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF