component
L6384ED
Public Made by Adomby adom
STMicroelectronics Gate Drivers, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownL6384ED
STMicroelectronics · Gate Drivers · SOP-8
L6384ED from STMicroelectronics, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | input | Logic input in phase with HVG and in opposition of phase with LVG, compatible to VCC voltage with Vil Max = 1.5 V and Vih Min = 3.6 V. |
| 2 | VCC | power_in | Supply input voltage with internal clamp at typ. 15.6 V; recommended operating range per Table 3 is up to 14.4 V. |
| 3 | DT/SD | input | High impedance deadtime/shutdown control pin; below Vdt (typ. 0.5 V) shuts down device; above Vdt sets deadtime between high-side and low-side drivers with range of 0.4 to 3.1 µs. |
| 4 | GND | power_in | Ground reference. |
| 5 | LVG | output | Low-side driver output; sources 400 mA and sinks 650 mA with maximum 0.3 V drop at 10 mA sink when VCC > 3 V. |
| 6 | VOUT | power_in | High-side driver floating reference (maximum 580 V per Table 3); layout care required to avoid below-ground spikes on this pin. |
| 7 | HVG | output | High-side driver output; sources 400 mA and sinks 650 mA with maximum 0.3 V drop relative to VOUT at 10 mA sink when VCC > 3 V. |
| 8 | VBOOT | power_in | Bootstrap supply voltage for high-side floating driver supply; minimum 17 V per Table 3 with bootstrap capacitor connected between this pin and pin 6 (VOUT). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOP-8 |
| Category | Motor Driver ICs |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
L6384ED - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
l6384ed-etched.step/l6384ed-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);l6384ed.step/l6384ed.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (18 pp, sha256
3407e0718eb0f7f9, retrieved 2026-10-07, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).