Loads on click. Unloads when scrolled away or the tab is hidden.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads when scrolled away or the tab is hidden.

PCB Footprint

Open full view ↗
Loads on click. Unloads when scrolled away or the tab is hidden.
Loads on click. Unloads when scrolled away or the tab is hidden.
Download PDF
Contents

README

markdown

NT01A

ICMAN Tech · Touch Sensors · SOT-23-6

NT01A from ICMAN Tech, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CMOD passive Charge-collection capacitor input. Connect a fixed capacitor (typ. 4.7nF, range 1nF-10nF) to GND. Sensitivity independent of this value.
2 GND power_in Power supply ground (0V reference).
3 VDD power_in Positive power supply input, 2.5V to 6.0V. Decouple with 100nF close to the pin.
4 OUT output Touch detection output. NMOS open-drain with internal ~10kΩ pull-up. Outputs weak-high when idle and strong-low when touch is detected. Max sink current 10mA; series 510Ω recommended to host.
5 CIN1 input Capacitive sensing input. Connect to the touch pad/electrode (typically via a series resistor such as 3kΩ).
6 CDC passive Sensitivity-setting capacitor input. Connect capacitor 5pF-100pF to GND; smaller value gives higher sensitivity. Use 10%+ tolerance polyester, NPO, or COG capacitor placed close to the IC.

Key specifications

Parameter Value
Manufacturer ICMAN Tech
Package SOT-23-6
Category Sensors
Pins 6

CAD (KiCad official)

  • Symbol: NT01A
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: ICMAN Tech datasheet (12 pp, sha256 7cc27969261a8a84, retrieved 2026-08-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF