G2RL-1A DC5
Public Made by Adomby adom
Aratas (Formerly Omron Components) Relays. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗PCB Footprint
Open full view ↗Datasheet
Open in new tab ↗Contents
README
markdownG2RL-1A DC5
Aratas (Formerly Omron Components) · Relays · Unknown
G2RL-1A DC5 from Aratas (Formerly Omron Components), in a Unknown. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). The symbol is generated from that pin table, the footprint is an Adom_Gen land derived from the manufacturer drawing, and the 3D model is generated to fit it.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | COIL | passive | Relay coil terminal; no coil polarity (p.5). DC5: rated 5 VDC, 80.0 mA, 62.5 ohm (p.2). |
| 5 | COIL | passive | Relay coil terminal; no coil polarity (p.5). DC5: rated 5 VDC, 80.0 mA, 62.5 ohm (p.2). |
| 4 | COM | passive | Common contact: the moving blade's pivot in the p.5 terminal arrangement (as on the SPDT G2RL-1, where it switches between 2 and 3). |
| 3 | NO | passive | Normally open contact: the fixed contact the blade closes onto when the coil is energised (p.5); SPST-NO (1a). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Aratas (Formerly Omron Components) |
| Package | Unknown |
| Category | Relays |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Coil resistance tolerance | -10 | 10 | % | Coil temperature 23°C (Note 1) | 2 | ||
| Must release voltage | 10 | % of rated voltage | Standard, High-capacity type | 2 | |||
| Must operate voltage | 70 | % of rated voltage | Standard, High-capacity type | 2 | |||
| Max. coil voltage | 130 | % of rated voltage | at 85°C | 2 | |||
| Operate time | 15 | ms | Initial value at 23°C (table Note 1) | 3 | |||
| Release time | 5 | ms | Initial value at 23°C (table Note 1) | 3 | |||
| Contact resistance | 100 | mΩ | 5 VDC, 1 A, voltage drop method | 3 | |||
| Insulation resistance | 1000 | MΩ | 500 VDC ohmmeter, measured at same points as dielectric strength | 3 | |||
| Ambient operating temperature | -40 | 85 | °C | No icing or condensation | 3 | ||
| Ambient operating humidity | 5 | 85 | % | No icing or condensation | 3 | ||
| Max. switching voltage (AC) | 440 | VAC | 2 | ||||
| Max. switching voltage (DC) | 300 | VDC | 2 | ||||
| Max. switching current | 12 | A | Standard type | 2 | |||
| Clearance distance | 8 | mm | 7 | ||||
| Creepage distance | 8 | mm | 7 | ||||
| Coil resistance | 62.5 | Ω | Measured at coil temperature 23°C (Note 1) | 2 | |||
| Rated current | 80 | mA | Measured at coil temperature 23°C (Note 1) | 2 | |||
| Power consumption | 400 | mW | Standard, High-capacity type (printed as Approx.) | 2 | |||
| Rated coil voltage | 5 | VDC | 2 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | silver | 5. Contact Material None : Standard (Ag-alloy, Cd free) | 1 |
CAD (Adom-generated)
- Symbol:
G2RL-1A DC5 - Footprint:
Adom_Gen:Aratas_Formerly_Omron_Components__G2_862c72 - 3D model: generated to fit the land (STEP)
- 3D model files:
g2rl-1a-dc5-etched.step/g2rl-1a-dc5-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);g2rl-1a-dc5.step/g2rl-1a-dc5.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Aratas (Formerly Omron Components) datasheet (8 pp, sha256
89ce57abbc4b0892, retrieved 2026-11-12, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: symbol generated from the datasheet pin table; footprint an Adom_Gen land derived from the manufacturer drawing; 3D model generated to fit that land. Land: Omron prints hole positions and diameter only (p.5 PCB Mounting Holes, bottom view: four 1.3-dia. holes; 1-5 7.5 apart, 5-4 20, 4-3 3.5, 3 on the 1 row); annular copper is drill + 0.7 (IPC-2222 level B rule).