component
DRV411AIPWPR
Public Made by Adomby adom
Texas Instruments ADC/DAC - Specialized, HTSSOP-20-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownDRV411AIPWPR
Texas Instruments · ADC/DAC - Specialized · HTSSOP-20-EP
DRV411AIPWPR from Texas Instruments, in a HTSSOP-20-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | REFSEL1 | input | Input that sets the reference mode together with REFSEL2 (see the Voltage Reference section); CMOS logic levels, VIH 0.7×VDD min and VIL 0.3×VDD max. |
| 2 | REFOUT | output | Output terminal for the selected reference voltage (2.5 V, 1.65 V, or ratiometric 50% of VDD); load regulation 0.15-0.35 mV/mA. |
| 3 | REFIN | input | Input for the zero reference to the differential amplifier. |
| 4 | VOUT | output | Output of the differential amplifier. |
| 5 | IAIN2 | input | Noninverting input of the differential amplifier; inputs must be limited to 5 mA (max) or ±1.5 V (max). |
| 6 | IAIN1 | input | Inverting input of the differential amplifier; inputs must be limited to 5 mA (max) or ±1.5 V (max). |
| 7 | GND | power_in | Ground connection. |
| 8 | GND | power_in | Ground connection. |
| 9 | ICOMP2 | output | Output 2 of the compensation coil driver (250 mA H-bridge; ICOMP short-circuit limit 300 mA). |
| 10 | ICOMP1 | output | Output 1 of the compensation coil driver (250 mA H-bridge; ICOMP short-circuit limit 300 mA). |
| 11 | VDD | power_in | Supply voltage, specified from 2.7 V to 5.5 V (absolute maximum 7 V). |
| 12 | GSEL2 | input | Input that selects the gain of the Hall amplifier together with GSEL1 (see Gain Selection and Compensation Frequency section); CMOS logic levels. |
| 13 | GSEL1 | input | Input that selects the gain of the Hall amplifier together with GSEL2 (see Gain Selection and Compensation Frequency section); CMOS logic levels. |
| 14 | ERROR | output | Open-drain error indication output with no internal pull-up; requires an external pull-up resistor (see the Error Conditions section). |
| 15 | HALL4 | passive | Pin 4 of an AKM HW322 / HW302 or similar Hall element. |
| 16 | HALL3 | passive | Pin 3 of an AKM HW322 / HW302 or similar Hall element. |
| 17 | HALL2 | passive | Pin 2 of an AKM HW322 / HW302 or similar Hall element. |
| 18 | HALL1 | passive | Pin 1 of an AKM HW322 / HW302 or similar Hall element. |
| 19 | OR | output | Open-drain overrange indication output with no internal pull-up; requires an external pull-up resistor (see the Error Conditions section). |
| 20 | REFSEL2 | input | Input that sets the reference mode together with REFSEL1 (see the Voltage Reference section); CMOS logic levels. |
| 21 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | HTSSOP-20-EP |
| Category | ADC/DAC/Data Conversion |
| Pins | 21 |
CAD (KiCad official)
- Symbol:
DRV411AIPWPR - Footprint:
Package_SO:TSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP2.15x3.35mm - 3D model: HTSSOP-20-EP, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.2 mm nominal TSSOP height). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions are nominal, not the manufacturer's CAD (STEP)
- 3D model files:
drv411aipwpr-etched.step/drv411aipwpr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);drv411aipwpr.step/drv411aipwpr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (36 pp, sha256
2ed3a527ecc9890c, retrieved 2026-10-08, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).