3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLD39015M125R
STMicroelectronics · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
LD39015M125R from STMicroelectronics, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | LDO input voltage; the operating input range is 1.5 V to 5.5 V, with an absolute maximum DC input of -0.3 V to 7 V. |
| 2 | GND | power_in | Common ground; all absolute maximum ratings are referred to GND. |
| 3 | EN | input | Enable logic input: low (0.4 V max) puts the device in shutdown and high (0.9 V min) makes it active, with EN limited to -0.3 V to VIN + 0.3 V. |
| 4 | NC | unconnected | Not connected. |
| 5 | OUT | power_out | Regulated output voltage (1.25 V for order code LD39015M125R), stable with an output capacitor of 1 µF to 22 µF. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| DC input voltage | VIN | -0.3 | 7 | V | 6 | ||
| Operating input voltage | VIN | 1.5 | 5.5 | V | 7 | ||
| DC output voltage | VOUT | -0.3 | V | Upper limit printed as VI + 0.3 V; no numeric max | 6 | ||
| Enable input voltage | VEN | -0.3 | V | Upper limit printed as VI + 0.3 V; no numeric max | 6 | ||
| Storage temperature range | TSTG | -65 | 150 | °C | 6 | ||
| Operating junction temperature range | TOP | -40 | 125 | °C | 6 | ||
| Turn-on threshold (UVLO) | VUVLO | 1.45 | 1.48 | V | 7 | ||
| Turn-off threshold (UVLO) | VUVLO | 1.3 | 1.35 | mV | 7 | ||
| VOUT accuracy | VOUT | -10 | 10 | mV | VOUT ≤ 1.5 V, IOUT = 1 mA | 7 | |
| VOUT accuracy | VOUT | -30 | 30 | mV | VOUT ≤ 1.5 V, IOUT = 1 mA, -40 °C < TJ < 125 °C | 7 | |
| Output capacitor | COUT | 1 | 22 | µF | Capacitance (see typical performance characteristics for stability) | 8 | |
| Enable pin input current | IEN | 0.1 | 100 | nA | VEN = VIN | 8 | |
| VIN input current in OFF mode | 0.001 | 1 | µA | VEN = GND | 7 | ||
| Static line regulation | ΔVOUT | 0.01 | %/V | VOUT +1 V ≤ VIN ≤ 5.5 V, IOUT = 1 mA | 7 | ||
| Transient line regulation | ΔVOUT | 10 | mVpp | ΔVIN = +500 mV, IOUT = 1 mA, TR = TF = 5 µs | 7 | ||
| Static load regulation | ΔVOUT | 0.002 | %/mA | IOUT = 1 mA to 150 mA | 7 | ||
| Transient load regulation | ΔVOUT | 40 | mVpp | IOUT = 1 mA to 150 mA, TR = TF = 5 µs | 7 | ||
| Quiescent current | IQ | 18 | µA | IOUT = 0 mA | 7 | ||
| Quiescent current | IQ | 50 | µA | IOUT = 0 mA, -40 °C < TJ < 125 °C | 7 | ||
| Quiescent current | IQ | 38 | µA | IOUT = 0 to 150 mA | 7 | ||
| Quiescent current | IQ | 70 | µA | IOUT = 0 to 150 mA, -40 °C < TJ < 125 °C | 7 | ||
| Short-circuit current | ISC | 350 | mA | RL = 0 | 8 | ||
| Enable input logic low | VEN | 0.4 | V | VIN = 1.5 V to 5.5 V, -40 °C < TJ < 125 °C | 8 | ||
| Enable input logic high | VEN | 0.9 | V | VIN = 1.5 V to 5.5 V, -40 °C < TJ < 125 °C | 8 | ||
| Turn-on time | TON | 30 | µs | Time to output reaching 95% of nominal value | 8 | ||
| Thermal shutdown | TSHDN | 160 | °C | 8 | |||
| Thermal shutdown hysteresis | TSHDN | 20 | °C | Hysteresis | 8 | ||
| Thermal resistance junction-ambient | RthJA | 255 | °C/W | SOT23-5L | 6 | ||
| Thermal resistance junction-case | RthJC | 81 | °C/W | SOT23-5L | 6 |
CAD (KiCad official)
- Symbol:
LD39015M125R - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 1.175 mm tall, datasheet A, midpoint of min and max). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
ld39015m125r-etched.step/ld39015m125r-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ld39015m125r.step/ld39015m125r.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (15 pp, sha256
3f7482af11a2ca76, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).