Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SN74ALVC164245DLR

Texas Instruments · Receivers & Transceivers · SSOP-48-300mil

SN74ALVC164245DLR from Texas Instruments, in a SSOP-48-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1DIR input Direction control for the 1A/1B bus; with 1OE it selects B-port outputs (A to B) or A-port outputs (B to A), or puts both ports in high impedance.
2 1B1 bidirectional B-port I/O on the VCCB (3.3 V or 5 V) side, acting as input or output per 1DIR and 1OE; its input circuitry is always active, so it must not float to avoid excess ICC and ICCZ.
3 1B2 bidirectional B-port I/O on the VCCB (3.3 V or 5 V) side, acting as input or output per 1DIR and 1OE; its input circuitry is always active, so it must not float to avoid excess ICC and ICCZ.
4 GND power_in Ground pin.
5 1B3 bidirectional B-port I/O on the VCCB (3.3 V or 5 V) side, acting as input or output per 1DIR and 1OE; its input circuitry is always active, so it must not float to avoid excess ICC and ICCZ.
6 1B4 bidirectional B-port I/O on the VCCB (3.3 V or 5 V) side, acting as input or output per 1DIR and 1OE; its input circuitry is always active, so it must not float to avoid excess ICC and ICCZ.
7 VCCB power_in B-port supply, set to operate at 3.3 V or 5 V; recommended VCCB supply range is 3 V to 5.5 V.
8 1B5 bidirectional B-port I/O on the VCCB (3.3 V or 5 V) side, acting as input or output per 1DIR and 1OE; its input circuitry is always active, so it must not float to avoid excess ICC and ICCZ.
9 1B6 bidirectional B-port I/O on the VCCB (3.3 V or 5 V) side, acting as input or output per 1DIR and 1OE; its input circuitry is always active, so it must not float to avoid excess ICC and ICCZ.
10 GND power_in Ground pin.
11 1B7 bidirectional B-port I/O on the VCCB (3.3 V or 5 V) side, acting as input or output per 1DIR and 1OE; its input circuitry is always active, so it must not float to avoid excess ICC and ICCZ.
12 1B8 bidirectional B-port I/O on the VCCB (3.3 V or 5 V) side, acting as input or output per 1DIR and 1OE; its input circuitry is always active, so it must not float to avoid excess ICC and ICCZ.
13 2B1 bidirectional B-port I/O on the VCCB (3.3 V or 5 V) side, acting as input or output per 2DIR and 2OE; its input circuitry is always active, so it must not float to avoid excess ICC and ICCZ.
14 2B2 bidirectional B-port I/O on the VCCB (3.3 V or 5 V) side, acting as input or output per 2DIR and 2OE; its input circuitry is always active, so it must not float to avoid excess ICC and ICCZ.
15 GND power_in Ground pin.
16 2B3 bidirectional B-port I/O on the VCCB (3.3 V or 5 V) side, acting as input or output per 2DIR and 2OE; its input circuitry is always active, so it must not float to avoid excess ICC and ICCZ.
17 2B4 bidirectional B-port I/O on the VCCB (3.3 V or 5 V) side, acting as input or output per 2DIR and 2OE; its input circuitry is always active, so it must not float to avoid excess ICC and ICCZ.
18 VCCB power_in B-port supply, set to operate at 3.3 V or 5 V; recommended VCCB supply range is 3 V to 5.5 V.
19 2B5 bidirectional B-port I/O on the VCCB (3.3 V or 5 V) side, acting as input or output per 2DIR and 2OE; its input circuitry is always active, so it must not float to avoid excess ICC and ICCZ.
20 2B6 bidirectional B-port I/O on the VCCB (3.3 V or 5 V) side, acting as input or output per 2DIR and 2OE; its input circuitry is always active, so it must not float to avoid excess ICC and ICCZ.
21 GND power_in Ground pin.
22 2B7 bidirectional B-port I/O on the VCCB (3.3 V or 5 V) side, acting as input or output per 2DIR and 2OE; its input circuitry is always active, so it must not float to avoid excess ICC and ICCZ.
23 2B8 bidirectional B-port I/O on the VCCB (3.3 V or 5 V) side, acting as input or output per 2DIR and 2OE; its input circuitry is always active, so it must not float to avoid excess ICC and ICCZ.
24 2DIR input Direction control for the 2A/2B bus; with 2OE it selects B-port outputs (A to B) or A-port outputs (B to A), or puts both ports in high impedance.
25 2OE input Output enable for the 2A/2B bus; with 2DIR it sets whether the B-port or A-port outputs are active or both ports are high impedance, and should be tied to VCC through a pullup resistor to keep outputs high impedance during power up or down.
26 2A8 bidirectional A-port I/O on the VCCA (2.5 V or 3.3 V) side, acting as input or output per 2DIR and 2OE; its input circuitry is always active, so it must not float to avoid excess ICC and ICCZ.
27 2A7 bidirectional A-port I/O on the VCCA (2.5 V or 3.3 V) side, acting as input or output per 2DIR and 2OE; its input circuitry is always active, so it must not float to avoid excess ICC and ICCZ.
28 GND power_in Ground pin.
29 2A6 bidirectional A-port I/O on the VCCA (2.5 V or 3.3 V) side, acting as input or output per 2DIR and 2OE; its input circuitry is always active, so it must not float to avoid excess ICC and ICCZ.
30 2A5 bidirectional A-port I/O on the VCCA (2.5 V or 3.3 V) side, acting as input or output per 2DIR and 2OE; its input circuitry is always active, so it must not float to avoid excess ICC and ICCZ.
31 VCCA power_in A-port supply, set to operate at 2.5 V or 3.3 V; the control inputs (1DIR, 2DIR, 1OE, 2OE) are powered by VCCA.
32 2A4 bidirectional A-port I/O on the VCCA (2.5 V or 3.3 V) side, acting as input or output per 2DIR and 2OE; its input circuitry is always active, so it must not float to avoid excess ICC and ICCZ.
33 2A3 bidirectional A-port I/O on the VCCA (2.5 V or 3.3 V) side, acting as input or output per 2DIR and 2OE; its input circuitry is always active, so it must not float to avoid excess ICC and ICCZ.
34 GND power_in Ground pin.
35 2A2 bidirectional A-port I/O on the VCCA (2.5 V or 3.3 V) side, acting as input or output per 2DIR and 2OE; its input circuitry is always active, so it must not float to avoid excess ICC and ICCZ.
36 2A1 bidirectional A-port I/O on the VCCA (2.5 V or 3.3 V) side, acting as input or output per 2DIR and 2OE; its input circuitry is always active, so it must not float to avoid excess ICC and ICCZ.
37 1A8 bidirectional A-port I/O on the VCCA (2.5 V or 3.3 V) side, acting as input or output per 1DIR and 1OE; its input circuitry is always active, so it must not float to avoid excess ICC and ICCZ.
38 1A7 bidirectional A-port I/O on the VCCA (2.5 V or 3.3 V) side, acting as input or output per 1DIR and 1OE; its input circuitry is always active, so it must not float to avoid excess ICC and ICCZ.
39 GND power_in Ground pin.
40 1A6 bidirectional A-port I/O on the VCCA (2.5 V or 3.3 V) side, acting as input or output per 1DIR and 1OE; its input circuitry is always active, so it must not float to avoid excess ICC and ICCZ.
41 1A5 bidirectional A-port I/O on the VCCA (2.5 V or 3.3 V) side, acting as input or output per 1DIR and 1OE; its input circuitry is always active, so it must not float to avoid excess ICC and ICCZ.
42 VCCA power_in A-port supply, set to operate at 2.5 V or 3.3 V; the control inputs (1DIR, 2DIR, 1OE, 2OE) are powered by VCCA.
43 1A4 bidirectional A-port I/O on the VCCA (2.5 V or 3.3 V) side, acting as input or output per 1DIR and 1OE; its input circuitry is always active, so it must not float to avoid excess ICC and ICCZ.
44 1A3 bidirectional A-port I/O on the VCCA (2.5 V or 3.3 V) side, acting as input or output per 1DIR and 1OE; its input circuitry is always active, so it must not float to avoid excess ICC and ICCZ.
45 GND power_in Ground pin.
46 1A2 bidirectional A-port I/O on the VCCA (2.5 V or 3.3 V) side, acting as input or output per 1DIR and 1OE; its input circuitry is always active, so it must not float to avoid excess ICC and ICCZ.
47 1A1 bidirectional A-port I/O on the VCCA (2.5 V or 3.3 V) side, acting as input or output per 1DIR and 1OE; its input circuitry is always active, so it must not float to avoid excess ICC and ICCZ.
48 1OE input Output enable for the 1A/1B bus; with 1DIR it sets whether the B-port or A-port outputs are active or both ports are high impedance, and should be tied to VCC through a pullup resistor to keep outputs high impedance during power up or down.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SSOP-48-300mil
Category Logic ICs
Pins 48

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VCCB supply voltage VCCB 3 5.5 V 7
High-level input voltage VIH 2 V 7
Low-level input voltage VIL 0.7 V VCCB = 3 V to 3.6 V 7
Low-level input voltage VIL 0.8 V VCCB = 4.5 V to 5.5 V 7
Input voltage (B port) VIB 0 V 7
Output voltage (B port) VOB 0 V 7
High-level output current IOH -24 mA 7
Low-level output current IOL 24 mA 7
Input transition rise or fall rate Δt/Δv 10 ns/V 7
Operating free-air temperature TA -40 85 °C 7
VCCA supply voltage VCCA 2.3 3.6 V 8
High-level input voltage VIH 1.7 V VCCA = 2.3 V to 2.7 V 8
High-level input voltage VIH 2 V VCCA = 3 V to 3.6 V 8
Low-level input voltage VIL 0.7 V VCCA = 2.3 V to 2.7 V 8
Low-level input voltage VIL 0.8 V VCCA = 3 V to 3.6 V 8
Input voltage (A port) VIA 0 V 8
Output voltage (A port) VOA 0 V 8
High-level output current IOH -18 mA VCCA = 2.3 V 8
High-level output current IOH -24 mA VCCA = 3 V 8
Low-level output current IOL 18 mA VCCA = 2.3 V 8
Low-level output current IOL 24 mA VCCA = 3 V 8
Supply voltage VCCA (absolute maximum) VCCA -0.5 4.6 V Over operating free-air temperature range for VCCB at 5 V and VCCA at 3.3 V 7
Supply voltage VCCB (absolute maximum) VCCB -0.5 6 V Over operating free-air temperature range for VCCB at 5 V and VCCA at 3.3 V 7
Input voltage except I/O ports VI -0.5 6 V Limited to 6 V maximum (note 2) 7
Input voltage I/O port A VI -0.5 4.6 V VCCA + 0.5 V; limited to 4.6 V maximum (note 3) 7
Input voltage I/O port B VI -0.5 V VCCB + 0.5 V; limited to 6 V maximum (note 2) 7
Input clamp current IIK -50 mA VI < 0 7
Output clamp current IOK -50 mA VO < 0 7
Continuous output current IO -50 50 mA 7
Continuous current through each VCC or GND -100 100 mA 7
Storage temperature Tstg -65 150 °C 7
Junction-to-ambient thermal resistance (DL, SSOP 48-pin) RθJA 63.6 °C/W DL (SSOP) package, 48 pins 8
Junction-to-case (top) thermal resistance (DL, SSOP 48-pin) RθJC(top) 30.1 °C/W DL (SSOP) package, 48 pins 8
High-level output voltage B to A VOH 2.2 V B to A, IOH = -12 mA, VCCA = 2.7 V 9
High-level output voltage B to A VOH 2.4 V B to A, IOH = -12 mA, VCCA = 3 V 9
High-level output voltage B to A VOH 2 V B to A, IOH = -24 mA, VCCA = 3 V 9
High-level output voltage A to B VOH 4.3 V A to B, IOH = -100 µA, VCCB = 4.5 V 9
High-level output voltage A to B VOH 5.3 V A to B, IOH = -100 µA, VCCB = 5.5 V 9
High-level output voltage A to B VOH 3.7 V A to B, IOH = -24 mA, VCCB = 4.5 V 9
High-level output voltage A to B VOH 4.7 V A to B, IOH = -24 mA, VCCB = 5.5 V 9
Low-level output voltage B to A VOL 0.2 V B to A, IOL = 100 µA, VCCA = 2.7 V to 3.6 V 9
Low-level output voltage B to A VOL 0.4 V B to A, IOL = 12 mA, VCCA = 2.7 V 9
Low-level output voltage B to A VOL 0.55 V B to A, IOL = 24 mA, VCCA = 3 V 9
Low-level output voltage A to B VOL 0.2 V A to B, IOL = 100 µA, VCCB = 4.5 V to 5.5 V 9
Low-level output voltage A to B VOL 0.55 V A to B, IOL = 24 mA, VCCB = 4.5 V to 5.5 V 9
Control input current II -5 5 µA Control inputs, VI = VCCA/VCCB or GND, VCCA = 3.6 V, VCCB = 5.5 V 9
Off-state output current IOZ -10 10 µA A or B port, VO = VCCA/VCCB or GND, VCCA = 3.6 V, VCCB = 5.5 V 9
Supply current ICC 40 µA VI = VCCA/VCCB or GND, IO = 0, VCCA = 3.6 V, VCCB = 5.5 V 9
Supply current increase per TTL input ΔICC 750 µA One input at VCCA/VCCB, 0.6 V, others at VCCA/VCCB or GND, VCCA = 3 V to 3.6 V, VCCB = 4.5 V to 5.5 V 9
High-level output voltage B to A VOH 1.7 V B to A, IOH = -8 mA, VCCA = 2.3 V, VCCB = 3 V to 3.6 V 10
High-level output voltage B to A VOH 1.8 V B to A, IOH = -12 mA, VCCA = 2.7 V, VCCB = 3 V to 3.6 V 10
High-level output voltage A to B VOH 2.2 V A to B, IOH = -18 mA, VCCA = 2.3 V to 2.7 V, VCCB = 3 V 10
Low-level output voltage B to A VOL 0.2 V B to A, IOL = 100 µA, VCCA = 2.3 V to 2.7 V, VCCB = 3 V to 3.6 V 10
Low-level output voltage B to A VOL 0.6 V B to A, IOL = 12 mA, VCCA = 2.3 V, VCCB = 3 V to 3.6 V 10
Low-level output voltage A to B VOL 0.2 V A to B, IOL = 100 µA, VCCA = 2.3 V to 2.7 V, VCCB = 3 V to 3.6 V 10
Low-level output voltage A to B VOL 0.55 V A to B, IOL = 18 mA, VCCA = 2.3 V, VCCB = 3 V 10
Control input current II -5 5 µA Control inputs, VI = VCCA/VCCB or GND, VCCA = 2.3 V to 2.7 V, VCCB = 3 V to 3.6 V 10
Off-state output current IOZ -10 10 µA A or B port, VO = VCCA/VCCB or GND, VCCA = 2.3 V to 2.7 V, VCCB = 3 V to 3.6 V 10
Supply current ICC 20 µA VI = VCCA/VCCB or GND, IO = 0, VCCA = 2.3 V to 2.7 V, VCCB = 3 V to 3.6 V 10
Supply current increase per TTL input ΔICC 750 µA One input at VCCA/VCCB, 0.6 V, others at VCCA/VCCB or GND, VCCA = 2.3 V to 2.7 V, VCCB = 3 V to 3.6 V 10

CAD (KiCad official)

  • Symbol: SN74ALVC164245DLR
  • Footprint: Package_SO:SSOP-48_7.5x15.9mm_P0.635mm
  • 3D model: SSOP-48-300mil (KiCad packages3D, STEP)
  • 3D model files: sn74alvc164245dlr-etched.step / sn74alvc164245dlr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn74alvc164245dlr.step / sn74alvc164245dlr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (31 pp, sha256 9abb74aef8df1a2f, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF