component
EG7335B
Public Made by Adomby adom
EG Micro LED Drivers, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownEG7335B
EG Micro · LED Drivers · SOP-8
EG7335B from EG Micro, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Supply pin with an operating range of 2.5 V to 5.5 V (3.7 V typical) and an absolute maximum of -0.3 V to 5.7 V. |
| 2 | OPT1 | input | Mode-select input 1, which together with OPT2 selects one of four operating modes and must be tied to VDD or GND. |
| 3 | OPT2 | input | Mode-select input 2, which together with OPT1 selects one of four operating modes and must be tied to VDD or GND. |
| 4 | EN | input | Enable input where low level gives normal operation and it must be tied to VDD or GND; with EN=VDD the shutdown current is below 1 uA. |
| 5 | REXT | input | External resistor pin that sets the LED output current, with the datasheet listing 700 mA at 49 kΩ, 800 mA at 43 kΩ, 900 mA at 38 kΩ and 1400 mA at 24 kΩ. |
| 6 | GND | power_in | Ground pin, which should be connected to a large copper area on the PCB (and to the metal housing where possible) to aid heat dissipation. |
| 7 | GND | power_in | Ground pin, which should be connected to a large copper area on the PCB (and to the metal housing where possible) to aid heat dissipation. |
| 8 | LED | output | Negative terminal connection for the external LED, with an output withstand voltage limit of -0.3 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | EG Micro |
| Package | SOP-8 |
| Category | LED Drivers |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (absolute maximum) | VDD | -0.3 | 5.7 | V | 6 | ||
| LED output pin voltage (absolute maximum) | VLED | -0.3 | 5.5 | V | 6 | ||
| Junction temperature (absolute maximum) | TJ | 150 | ℃ | 6 | |||
| Operating temperature range | TA | -40 | 85 | ℃ | 6 | ||
| Storage temperature (absolute maximum) | Tstr | -65 | 150 | ℃ | 6 | ||
| Supply voltage | VDD | 2.5 | 3.7 | 5.5 | V | 接 LED 灯珠 (LED connected) | 6 |
| Shutdown current | Is | 1 | uA | EN=VDD | 6 | ||
| Output current accuracy | ILED/ILED | 5 | % | VDD(3.4V-4.4V) | 7 | ||
| Quiescent current | Iq | 470 | uA | 第一档 (first mode level) | 7 | ||
| Output current (EG7335B) | ILED | 700 | mA | 串 LED 灯珠,REXT=49K (series LED) | 7 | ||
| Output current (EG7335B) | ILED | 800 | mA | 串 LED 灯珠,REXT=43K (series LED) | 7 | ||
| Output current (EG7335B) | ILED | 900 | mA | 串 LED 灯珠,REXT=38K (series LED) | 7 | ||
| Output current (EG7335B) | ILED | 1400 | mA | 串 LED 灯珠,REXT=24K (series LED) | 7 | ||
| Dropout voltage | VDO | 100 | mV | 7 | |||
| Over-temperature protection threshold | OTP | 120 | ℃ | 7 | |||
| Undervoltage protection threshold | UVP | 2.5 | V | 不接 LED 灯珠 (no LED connected) | 7 |
CAD (KiCad official)
- Symbol:
EG7335B - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
eg7335b-etched.step/eg7335b-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);eg7335b.step/eg7335b.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: EG Micro datasheet (8 pp, sha256
bdd9fec4f174c88d, retrieved 2026-10-18, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).