Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TPS22953DSQR

Texas Instruments · Power Distribution Switches · WSON-10-EP(2x2)

TPS22953DSQR from Texas Instruments, in a WSON-10-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN input Switch input; bypass to GND with ceramic capacitor.
2 IN input Switch input; bypass to GND with ceramic capacitor.
3 BIAS power_in Bias and power supply pin for the device operating range 2.5V to 5.7V.
4 EN input Active-high switch enable/disable and input UVLO pin; configure with external resistor divider and do not leave floating.
5 GND power_in Device ground.
6 CT output Slew rate control pin; add ceramic capacitor from CT to GND to control VOUT rise time and limit inrush current (25V minimum rated capacitor).
7 PG tri_state Open-drain power good output that pulls low when EN or SNS voltage falls below their respective VIL threshold.
8 SNS input Sense pin for voltage monitoring; configure with external resistor divider and do not leave floating.
9 OUT output Switch output.
10 OUT output Switch output.
11 PAD power_in Exposed thermal pad; tie to GND for thermal and mechanical performance.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package WSON-10-EP(2x2)
Category Power Management (PMIC)
Pins 11

CAD (KiCad official)

  • Symbol: TPS22953DSQR
  • Footprint: Package_DFN_QFN:Texas_DSQ0010A_WSON-10-1EP_2x2mm_P0.4mm_EP0.9x1.5mm
  • 3D model: WSON-10-EP(2x2) (KiCad packages3D, STEP)
  • 3D model files: tps22953dsqr-etched.step / tps22953dsqr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tps22953dsqr.step / tps22953dsqr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (47 pp, sha256 1604bced1d3c2178, retrieved 2026-09-23, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF