3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSTM6315MDW13F
STMicroelectronics · Supervisor And Reset ICs · SOT-143-4
STM6315MDW13F from STMicroelectronics, in a SOT-143-4. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VSS | power_in | Ground reference for the device. |
| 2 | RST | output | Active-low open drain reset output that needs an external pull-up resistor to any supply up to 6V, and is guaranteed valid down to VCC = 1.0V. |
| 3 | MR | input | Manual reset input that asserts RST when taken low, with an internal 63kΩ (typ) pull-up so it can be left open if unused. |
| 4 | VCC | power_in | Supply voltage, operating range 1.0 to 5.5V (absolute maximum 7.0V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SOT-143-4 |
| Category | Power Management (PMIC) |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC operating voltage | VCC | 1 | 5.5 | V | 14 | ||
| ICC VCC supply current | ICC | 2 | 12 | µA | VCC = 5.5V, no load, TA = -40 to +85°C | 14 | |
| ICC VCC supply current | ICC | 15 | µA | VCC = 5.5V, no load, TA = -40 to +125°C | 14 | ||
| ICC VCC supply current | ICC | 1.5 | 10 | µA | VCC = 3.6V, no load, TA = -40 to +85°C | 14 | |
| ICC VCC supply current | ICC | 12 | µA | VCC = 3.6V, no load, TA = -40 to +125°C | 14 | ||
| RST output voltage (VOL) | VOL | 0.4 | V | VCC > 4.25V, ISINK = 3.2mA | 14 | ||
| RST output voltage (VOL) | VOL | 0.3 | V | VCC > 2.5V, ISINK = 1.2mA | 14 | ||
| RST output open drain leakage current | 1 | µA | VCC > VRST, RST not asserted | 14 | |||
| Reset threshold tolerance (VRST) | VRST | -1.8 | 1.8 | % | VCC falling; TA = 25°C | 14 | |
| Reset threshold tolerance (VRST) | VRST | -2.5 | 2.5 | % | VCC falling; TA = -40 to 85°C | 14 | |
| Reset threshold tolerance (VRST) | VRST | -3.5 | 3.5 | % | VCC falling; TA = -40 to 125°C | 14 | |
| Reset threshold, nominal (M variant) | VRST | 4.38 | V | 18 | |||
| Reset threshold temperature coefficient | 60 | ppm/°C | 14 | ||||
| VCC-to-RST delay | tRD | 35 | µs | VCC falling from (VRST + 100mV) to (VRST, 200mV) at 1mV/µs | 14 | ||
| RST pulse width (trec), D variant | trec | 140 | 210 | 280 | ms | TA = -40 to +85°C | 14 |
| RST pulse width (trec), D variant | trec | 112 | 336 | ms | TA = -40 to +125°C | 14 | |
| MR low input threshold (VIL) | VIL | 0.8 | V | VRST > 4.0V | 15 | ||
| MR high input threshold (VIH) | VIH | 2.4 | V | VRST > 4.0V | 15 | ||
| MR input pulse width | 1 | µs | 15 | ||||
| MR glitch rejection | 100 | ns | 15 | ||||
| MR-to-RST delay | 500 | ns | 15 | ||||
| MR pull-up resistance | 32 | 63 | 100 | kΩ | 15 | ||
| Ambient operating temperature | TA | -40 | 125 | °C | 13 | ||
| Storage temperature (VCC off) | TSTG | -55 | 150 | °C | VCC off | 12 | |
| Lead solder temperature | TSLD | 260 | °C | for 10 seconds | 12 | ||
| Input or output voltage | VIO | -0.3 | V | upper limit printed as VCC + 0.3 V | 12 | ||
| Supply voltage | VCC | -0.3 | 7 | V | 12 | ||
| Output current | IO | 20 | mA | 12 | |||
| Power dissipation | PD | 320 | mW | 12 |
CAD (KiCad official)
- Symbol:
STM6315MDW13F - Footprint:
Package_TO_SOT_SMD:SOT-143 - 3D model: SOT-143-4 (KiCad packages3D, STEP)
- 3D model files:
stm6315mdw13f-etched.step/stm6315mdw13f-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stm6315mdw13f.step/stm6315mdw13f.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (21 pp, sha256
059408cf2a388c0c, retrieved 2026-11-10, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).