Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MAX6070AAUT50+T

Maxim Integrated · Voltage References · SOT-23-6

MAX6070AAUT50+T from Maxim Integrated, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 FILTER passive Filter input; connect a 0.1µF capacitor from FILTER to ground for high-frequency bypass, or leave unconnected if not used.
2 GND power_in Ground.
3 EN input Active-high enable; drive high to enable the device and low to disable it (quiescent current below 1µA in shutdown).
4 IN power_in Supply input; absolute maximum -0.3V to +6V with respect to ground.
5 OUTS input Voltage reference sense output; connect to OUTF at the point where voltage accuracy is needed.
6 OUTF power_out Voltage reference force output; short to OUTS as close as possible to the load and bypass with a 0.1µF to 10µF capacitor to GND.

Key specifications

Parameter Value
Manufacturer Maxim Integrated
Package SOT-23-6
Category Power Supply Chip
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage Accuracy (MAX6070A) -0.04 0.04 % MAX6070A/MAX6071A, TA = +25°C 11
Output Voltage Temperature Drift TCVOUT 1.5 6 ppm/°C MAX6070A/MAX6071A 11
Line Regulation 200 400 µV/V Over specified VIN range, TA = +25°C 11
Line Regulation (over temperature) 500 µV/V Over specified VIN range, TA = TMIN to TMAX 11
Load Regulation, sink 160 275 µV/mA 0mA < IOUT < 10mA, sink 11
Load Regulation, source 160 275 µV/mA 0mA < IOUT < 10mA, source 11
Dropout Voltage 60 150 mV IOUT = 10mA, TA = TMIN to TMAX (Note 5) 11
Output Current IOUT -10 10 mA 11
Supply Voltage VIN 5.2 5.5 V Guaranteed by line regulation 11
Quiescent Supply Current IIN 160 250 µA TA = +25°C 11
Quiescent Supply Current (over temperature) IIN 330 µA TA = TMIN to TMAX 11
Shutdown Supply Current ISD 6 µA 11
Enable Input Current IEN -1 1 µA 11
Capacitive-Load Stability Range 0.1 10 µF IOUT ≤ 10mA 11
Short-Circuit Current, sourcing to ground ISC 25 mA Sourcing to ground 11
Short-Circuit Current, sinking from VIN ISC 25 mA Sinking from VIN 11
Long-Term Stability 35 ppm 1000 hours at TA = +25°C 11
Thermal Hysteresis 85 ppm Note 4 11
1/f Noise Voltage eOUT 9 µVP-P 0.1Hz to 10Hz, COUT = 0.1µF 11
Thermal Noise Voltage (MAX6070) eOUT 12 µVRMS MAX6070 thermal noise, 10Hz to 10kHz, COUT = 0.1µF, CFILTER = 0.1µF 11
Ripple Rejection 74 dB Frequency = 60Hz 11
Turn-On Settling Time (MAX6070) tR 10 ms Settling to 0.01%, COUT = 0.1µF, MAX6070, CFILTER = 0.1µF 11
Enable Settling Time (MAX6070) tEN 10 ms Settling to 0.01%, COUT = 0.1µF, MAX6070, CFILTER = 0.1µF 11
Operating Temperature Range -40 125 °C 2
OUTF to GNDS, GNDF, GND -0.3 6 V -0.3V to the lower of (VIN + 0.3V), +6V 2
OUTS to GNDS, GNDF, GND -0.3 6 V 2
IN to GNDS, GNDF, GND -0.3 6 V 2
EN to GNDS, GNDF, GND -0.3 6 V 2
FILTER to GND -0.3 6 V -0.3V to the lower of (VIN + 0.3V), +6V 2
GNDS to GNDF -0.3 0.3 V 2
Continuous Power Dissipation, SOT23 347.8 mW TA = +70°C, derate 4.3mW/°C above +70°C 2
Junction Temperature 150 °C 2
Storage Temperature Range -65 150 °C 2
Soldering Temperature (reflow) 260 °C 2
Lead Temperature (soldering, 10s) 300 °C 2
Thermal Resistance Junction to Ambient, SOT23 θJA 230 °C/W Multi-layer board, 6 SOT23 2
Thermal Resistance Junction to Case, SOT23 θJC 76 °C/W Multi-layer board, 6 SOT23 2

CAD (KiCad official)

  • Symbol: MAX6070AAUT50+T
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: max6070aaut50-t-etched.step / max6070aaut50-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max6070aaut50-t.step / max6070aaut50-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Maxim Integrated datasheet (26 pp, sha256 5b48e6a8cb45c5c4, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF