Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

STC15W4K32S4-30I-LQFP32

STC Micro · Microcontroller Units (MCUs/MPUs/SOCs) · LQFP-32(7x7)

STC15W4K32S4-30I-LQFP32 from STC Micro, in a LQFP-32(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 P1.0/RxD2/CCP1/ADC0 bidirectional Standard quasi-bidirectional I/O (PORT1[0]) that can also serve as ADC input channel 0, CCP1 capture/PWM output, or UART2 receive (RxD2); the port drives up to 20 mA and the whole chip must not exceed 90 mA for 32-pin packages.
2 P1.1/TxD2/CCP0/ADC1 bidirectional Standard quasi-bidirectional I/O (PORT1[1]) that can also serve as ADC input channel 1, CCP0 capture/PWM output, or UART2 transmit (TxD2); the port drives up to 20 mA.
3 P1.2/CMPO/ECI/SS/ADC2 bidirectional Standard I/O (PORT1[2]) that can also serve as ADC input channel 2, SPI slave select SS, CCP/PCA external counter input ECI, or comparator output CMPO.
4 P1.3/ADC3/MOSI bidirectional Standard I/O (PORT1[3]) that can also serve as ADC input channel 3 or SPI master-out/slave-in MOSI.
5 P1.4/MISO/ADC4 bidirectional Standard I/O (PORT1[4]) that can also serve as ADC input channel 4 or SPI master-in/slave-out MISO.
6 P1.5/SCLK/ADC5 bidirectional Standard I/O (PORT1[5]) that can also serve as ADC input channel 5 or SPI serial clock SCLK.
7 P1.6/PWM6/SysClkO_2/XTAL2/RxD_3/ADC6 bidirectional Standard I/O (PORT1[6]) that can also serve as ADC input channel 6, UART1 receive (RxD_3), system clock output SysClkO_2, crystal amplifier output XTAL2, or PWM6; PWM6 pins default to high-impedance input after power-on and must be set to another mode before use, and must not be high-impedance in power-down mode.
8 P1.7/PWM7/XTAL1/TxD_3/ADC7 bidirectional Standard I/O (PORT1[7]) that can also serve as ADC input channel 7, UART1 transmit (TxD_3), crystal amplifier input XTAL1 (external clock input when no crystal is used), or PWM7; PWM7 pins default to high-impedance input after power-on and must be set to another mode before use.
9 P5.4/RST/SysClkO/SS_3/CMP- bidirectional Standard I/O (PORT5[4]) that can also serve as the active-high reset input RST, system clock output SysClkO (SysClk/1, /2, /4 or /16), SPI slave select SS_3, or comparator negative input CMP- (must be set to high-impedance input when used as CMP-).
10 Vcc power_in Positive power supply; the series operates from 2.5 V to 5.5 V.
11 P5.5/CMP+ bidirectional Standard I/O (PORT5[5]) that can also serve as comparator positive input CMP+ (must be set to high-impedance input when used as CMP+).
12 Gnd power_in Power supply ground.
13 P3.0/RxD/INT4/T2CLKO bidirectional Standard I/O (PORT3[0]) that can also serve as UART1 receive (RxD), external interrupt INT4 (falling edge only, can wake power-down mode), or T2 clock output T2CLKO.
14 P3.1/TxD/T2 bidirectional Standard I/O (PORT3[1]) that can also serve as UART1 transmit (TxD) or external input of Timer/Counter 2 (T2).
15 P3.2/INT0 bidirectional Standard I/O (PORT3[2]) that can also serve as external interrupt 0; it is rising- or falling-edge triggered depending on IT0 and can wake power-down mode.
16 P3.3/INT1 bidirectional Standard I/O (PORT3[3]) that can also serve as external interrupt 1; it is rising- or falling-edge triggered depending on IT1 and can wake power-down mode.
17 P3.4/T0/T1CLKO/ECI_2 bidirectional Standard I/O (PORT3[4]) that can also serve as external input of Timer/Counter 0 (T0), Timer 1 clock output T1CLKO, or CCP/PCA external counter input ECI_2.
18 P3.5/T1/T0CLKO/CCP0_2 bidirectional Standard I/O (PORT3[5]) that can also serve as external input of Timer/Counter 1 (T1), Timer 0 clock output T0CLKO, or CCP0 channel CCP0_2.
19 P3.6/INT2/RxD_2/CCP1_2 bidirectional Standard I/O (PORT3[6]) that can also serve as external interrupt INT2 (falling edge only, can wake power-down mode), UART receive RxD_2, or CCP1_2.
20 P3.7/INT3/TxD_2/PWM2 bidirectional Standard I/O (PORT3[7]) that can also serve as external interrupt INT3 (falling edge only, can wake power-down mode), UART transmit TxD_2, or PWM2; the PWM2 pin defaults to high-impedance input after power-on and must be set to another mode before use.
21 P2.0/A8/RSTOUT_LOW bidirectional Standard I/O (PORT2[0]) that can also serve as address bus bit A8 or RSTOUT_LOW, which outputs low after power-on and during reset and can be set high or low by software.
22 P2.1/A9/SCLK_2/PWM3 bidirectional Standard I/O (PORT2[1]) that can also serve as address bus bit A9, SPI clock SCLK_2, or PWM3; the PWM3 pin defaults to high-impedance input after power-on and must be set to another mode before use.
23 P2.2/A10/MISO_2/PWM4 bidirectional Standard I/O (PORT2[2]) that can also serve as address bus bit A10, SPI master-in/slave-out MISO_2, or PWM4; the PWM4 pin defaults to high-impedance input after power-on and must be set to another mode before use.
24 P2.3/A11/MOSI_2/PWM5 bidirectional Standard I/O (PORT2[3]) that can also serve as address bus bit A11, SPI master-out/slave-in MOSI_2, or PWM5; the PWM5 pin defaults to high-impedance input after power-on and must be set to another mode before use.
25 P2.4/A12/ECI_3/SS_2/PWMFLT bidirectional Standard I/O (PORT2[4]) that can also serve as address bus bit A12, CCP/PCA external counter input ECI_3, SPI slave select SS_2, or PWM fault-stop control input PWMFLT.
26 P2.5/A13/CCP0_3 bidirectional Standard I/O (PORT2[5]) that can also serve as address bus bit A13 or CCP0 channel CCP0_3 (capture, high-speed output and PWM).
27 P2.6/A14/CCP1_3 bidirectional Standard I/O (PORT2[6]) that can also serve as address bus bit A14 or CCP1 channel CCP1_3 (capture, high-speed output and PWM).
28 P2.7/A15/PWM2_2 bidirectional Standard I/O (PORT2[7]) that can also serve as address bus bit A15 or PWM2 channel PWM2_2; the pin defaults to high-impedance input after power-on and must be set to another mode before use.
29 P0.0/AD0/RxD3 bidirectional Standard I/O (PORT0[0]) that can also serve as address/data bus bit AD0 or UART3 receive (RxD3).
30 P0.1/AD1/TxD3 bidirectional Standard I/O (PORT0[1]) that can also serve as address/data bus bit AD1 or UART3 transmit (TxD3).
31 P0.2/AD2/RxD4 bidirectional Standard I/O (PORT0[2]) that can also serve as address/data bus bit AD2 or UART4 receive (RxD4).
32 P0.3/AD3/TxD4 bidirectional Standard I/O (PORT0[3]) that can also serve as address/data bus bit AD3 or UART4 transmit (TxD4).

Key specifications

Parameter Value
Manufacturer STC Micro
Package LQFP-32(7x7)
Category Embedded Processors & Controllers
Pins 32

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Storage temperature TST -55 125 ℃ 1184
Operating temperature (I) TA -40 85 ℃ Grade (I), matches the -30I suffix 1184
Voltage on any pin -0.3 V Maximum printed as VCC + 0.3 1184

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing PC Accumulator contents and the contents of a sixteen-bit base register, which may be either the Data Pointer or the PC. In the latter case, the PC is incremented to the address of the following 441

CAD (KiCad official)

  • Symbol: STC15W4K32S4-30I-LQFP32
  • Footprint: Package_QFP:LQFP-32_7x7mm_P0.8mm
  • 3D model: LQFP-32(7x7) (KiCad packages3D, STEP)
  • 3D model files: stc15w4k32s4-30i-lqfp32-etched.step / stc15w4k32s4-30i-lqfp32-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stc15w4k32s4-30i-lqfp32.step / stc15w4k32s4-30i-lqfp32.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STC Micro datasheet (1219 pp, sha256 cc8c299c891646e0, retrieved 2026-11-17, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF