3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownPIC18F65K40T-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · TQFP-64(10x10)
PIC18F65K40T-I from Microchip Tech, in a TQFP-64(10x10). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RE1 | bidirectional | PORTE bit 1 I/O; ANE1; IOCE1; RX3/DT3 (EUSART3, PPS input) (Table 1 p.7) |
| 2 | RE0 | bidirectional | PORTE bit 0 I/O; ANE0; IOCE0; CK3 (EUSART3, PPS input) (Table 1 p.7) |
| 3 | RG0 | bidirectional | PORTG bit 0 I/O; ANG0 (Table 1 p.8) |
| 4 | RG1 | bidirectional | PORTG bit 1 I/O; ANG1; CK2 (EUSART2, PPS input) (Table 1 p.8) |
| 5 | RG2 | bidirectional | PORTG bit 2 I/O; ANG2; C3IN0+; RX2/DT2 (EUSART2, PPS input) (Table 1 p.8) |
| 6 | RG3 | bidirectional | PORTG bit 3 I/O; ANG3; C3IN0-; CCP4 (PPS input) (Table 1 p.8) |
| 7 | VPP/~{MCLR}/RG5 | input | Programming voltage / master clear (reset) input; RG5 general purpose input; IOCG5 (Table 1 p.8) |
| 8 | RG4 | bidirectional | PORTG bit 4 I/O; ANG4; C3IN1-; T5G/T7CKI (PPS input); CCP5 (PPS input) (Table 1 p.8) |
| 9 | VSS | power_in | Ground reference (Table 1 p.8) |
| 10 | VDD | power_in | Positive supply (Table 1 p.8) |
| 11 | RF7 | bidirectional | PORTF bit 7 I/O; ANF7; C2IN3-/C1IN3-/C3IN3-; ~{SS1} (MSSP1, PPS input) (Table 1 p.8) |
| 12 | RF6 | bidirectional | PORTF bit 6 I/O; ANF6; C1IN0+ (Table 1 p.8) |
| 13 | RF5 | bidirectional | PORTF bit 5 I/O; ANF5; DAC1OUT1; C1IN1-/C2IN1- (Table 1 p.8) |
| 14 | RF4 | bidirectional | PORTF bit 4 I/O; ANF4; C2IN0+ (Table 1 p.8) |
| 15 | RF3 | bidirectional | PORTF bit 3 I/O; ANF3; C1IN2-/C2IN2-/C3IN2- (Table 1 p.8) |
| 16 | RF2 | bidirectional | PORTF bit 2 I/O; ANF2 (Table 1 p.8) |
| 17 | RF1 | bidirectional | PORTF bit 1 I/O; ANF1 (Table 1 p.8) |
| 18 | RF0 | bidirectional | PORTF bit 0 I/O; ANF0; C1IN0-/C2IN0- (Table 1 p.8) |
| 19 | RG7 | bidirectional | PORTG bit 7 I/O; ANG7; SMT2SIG1 (PPS input) (Table 1 p.8) |
| 20 | RG6 | bidirectional | PORTG bit 6 I/O; ANG6; SMT2WIN1 (PPS input) (Table 1 p.8) |
| 21 | RA3 | bidirectional | PORTA bit 3 I/O; ANA3; Vref+ (ADC and DAC positive reference) (Table 1 p.6) |
| 22 | RA2 | bidirectional | PORTA bit 2 I/O; ANA2; Vref- (ADC and DAC negative reference); C1IN1+/C2IN1+/C3IN1+ (Table 1 p.6) |
| 23 | RA1 | bidirectional | PORTA bit 1 I/O; ANA1; T2IN (PPS input) (Table 1 p.6) |
| 24 | RA0 | bidirectional | PORTA bit 0 I/O; ANA0; C1IN4-/C2IN4-/C3IN4-; T8IN (PPS input) (Table 1 p.6) |
| 25 | RH1 | bidirectional | PORTH bit 1 I/O; ADCACT (PPS input) (Table 1 p.8) |
| 26 | RH0 | bidirectional | PORTH bit 0 general purpose I/O (Table 1 p.8) |
| 27 | RA5 | bidirectional | PORTA bit 5 I/O; ANA5; T3G (PPS input) (Table 1 p.6) |
| 28 | RA4 | bidirectional | PORTA bit 4 I/O; ANA4; T0CKI (PPS input) (Table 1 p.6) |
| 29 | RC1 | bidirectional | PORTC bit 1 I/O; IOCC1; T6IN (PPS input); RX4/DT4 (EUSART4, PPS input); SOSCI secondary oscillator input (Table 1 p.7) |
| 30 | RC0 | bidirectional | PORTC bit 0 I/O; IOCC0; T1CKI (PPS input); CK4 (EUSART4, PPS input); SOSCO secondary oscillator output (Table 1 p.7) |
| 31 | RC6 | bidirectional | PORTC bit 6 I/O; IOCC6; CK1 (EUSART1, PPS input) (Table 1 p.7) |
| 32 | RC7 | bidirectional | PORTC bit 7 I/O; IOCC7; RX1/DT1 (EUSART1, PPS input) (Table 1 p.7) |
| 33 | RC2 | bidirectional | PORTC bit 2 I/O; IOCC2; CWG1IN (PPS input) (Table 1 p.7) |
| 34 | RC3 | bidirectional | PORTC bit 3 I/O; IOCC3; SCL1/SCK1 (MSSP1, I2C levels) (Table 1 p.7) |
| 35 | RC4 | bidirectional | PORTC bit 4 I/O; IOCC4; SDA1/SDI1 (MSSP1, I2C levels) (Table 1 p.7) |
| 36 | RC5 | bidirectional | PORTC bit 5 I/O; IOCC5 (Table 1 p.7) |
| 37 | RB7 | bidirectional | PORTB bit 7 I/O; ANB7; DAC1OUT2; IOCB7; ICSPDAT programming data (Table 1 p.7) |
| 38 | VDD | power_in | Positive supply (Table 1 p.8) |
| 39 | RA7 | bidirectional | PORTA bit 7 I/O; ANA7; OSC1 oscillator input (Table 1 p.6) |
| 40 | RA6 | bidirectional | PORTA bit 6 I/O; ANA6; CLKOUT / OSC2 oscillator output (Table 1 p.6) |
| 41 | VSS | power_in | Ground reference (Table 1 p.8) |
| 42 | RB6 | bidirectional | PORTB bit 6 I/O; ANB6; IOCB6; ICSPCLK programming clock (Table 1 p.7) |
| 43 | RB5 | bidirectional | PORTB bit 5 I/O; ANB5; IOCB5; T1G/T3CKI (PPS input) (Table 1 p.7) |
| 44 | RB4 | bidirectional | PORTB bit 4 I/O; ANB4; IOCB4 (Table 1 p.7) |
| 45 | RB3 | bidirectional | PORTB bit 3 I/O; ANB3; IOCB3; INT3 (PPS input) (Table 1 p.7) |
| 46 | RB2 | bidirectional | PORTB bit 2 I/O; ANB2; IOCB2; INT2 (PPS input) (Table 1 p.7) |
| 47 | RB1 | bidirectional | PORTB bit 1 I/O; ANB1; IOCB1; INT1 (PPS input) (Table 1 p.7) |
| 48 | RB0 | bidirectional | PORTB bit 0 I/O; ANB0; IOCB0; INT0 (PPS input); ZCDIN zero-cross detect input (Table 1 p.7) |
| 49 | RD7 | bidirectional | PORTD bit 7 I/O; AND7; ~{SS2} (MSSP2, PPS input) (Table 1 p.7) |
| 50 | RD6 | bidirectional | PORTD bit 6 I/O; AND6; SCL2/SCK2 (MSSP2, I2C levels) (Table 1 p.7) |
| 51 | RD5 | bidirectional | PORTD bit 5 I/O; AND5; MDSRC (PPS input); SDA2/SDI2 (MSSP2, I2C levels) (Table 1 p.7) |
| 52 | RD4 | bidirectional | PORTD bit 4 I/O; AND4; MDCARH (PPS input) (Table 1 p.7) |
| 53 | RD3 | bidirectional | PORTD bit 3 I/O; AND3; MDCARL (PPS input) (Table 1 p.7) |
| 54 | RD2 | bidirectional | PORTD bit 2 I/O; AND2 (Table 1 p.7) |
| 55 | RD1 | bidirectional | PORTD bit 1 I/O; AND1; T5CKI/T7G (PPS input) (Table 1 p.7) |
| 56 | RH3 | bidirectional | PORTH bit 3 general purpose I/O (Table 1 p.8) |
| 57 | RH2 | bidirectional | PORTH bit 2 general purpose I/O (Table 1 p.8) |
| 58 | RD0 | bidirectional | PORTD bit 0 I/O; AND0 (Table 1 p.7) |
| 59 | RE7 | bidirectional | PORTE bit 7 I/O; ANE7; IOCE7; SMT1SIG1 (PPS input) (Table 1 p.8) |
| 60 | RE6 | bidirectional | PORTE bit 6 I/O; ANE6; IOCE6; CCP3 (PPS input); SMT1WIN1 (PPS input) (Table 1 p.7) |
| 61 | RE5 | bidirectional | PORTE bit 5 I/O; ANE5; IOCE5; CCP1 (PPS input) (Table 1 p.7) |
| 62 | RE4 | bidirectional | PORTE bit 4 I/O; ANE4; IOCE4; T4IN (PPS input); CCP2 (PPS input) (Table 1 p.7) |
| 63 | RE3 | bidirectional | PORTE bit 3 I/O; ANE3; IOCE3; RX5/DT5 (EUSART5, PPS input) (Table 1 p.7) |
| 64 | RE2 | bidirectional | PORTE bit 2 I/O; ANE2; IOCE2; CK5 (EUSART5, PPS input) (Table 1 p.7) |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | TQFP-64(10x10) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 64 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VDD (FOSC ≤ 16 MHz) | VDD | 2.3 | 5.5 | V | FOSC ≤ 16 MHz (PIC18F) | 809 | |
| Supply voltage VDD (FOSC > 16 MHz) | VDD | 2.5 | 5.5 | V | FOSC > 16 MHz (PIC18F) | 809 | |
| Supply voltage VDD (FOSC > 32 MHz) | VDD | 3 | 5.5 | V | FOSC > 32 MHz (PIC18F) | 809 | |
| RAM data retention voltage | VDR | 1.7 | V | Device in SLEEP mode | 809 | ||
| VDD rise rate to ensure internal POR | SVDD | 0.05 | V/ms | BOR or LPBOR disabled | 810 | ||
| IPD base, +85 °C | IPD | 0.4 | 4 | µA | VDD 3.0 V; VREGPM = 1 | 814 | |
| IPD base, +125 °C | IPD | 0.4 | 12 | µA | VDD 3.0 V; VREGPM = 1 | 814 | |
| IPD low-frequency oscillator/WDT, +85 °C | IPD_WDT | 0.6 | 5 | µA | VDD 3.0 V | 814 | |
| IPD low-frequency oscillator/WDT, +125 °C | IPD_WDT | 0.6 | 13 | µA | VDD 3.0 V | 814 | |
| IPD secondary oscillator (SOSC), +85 °C | IPD_SOSC | 0.8 | 8.5 | µA | VDD 3.0 V | 814 | |
| IPD secondary oscillator (SOSC), +125 °C | IPD_SOSC | 0.8 | 15 | µA | VDD 3.0 V | 814 | |
| IPD FVR, +85 °C | IPD_FVR | 32 | 53 | µA | VDD 3.0 V; FVRCON = 0x81 or 0x84 | 814 | |
| IPD FVR, +125 °C | IPD_FVR | 32 | 62 | µA | VDD 3.0 V; FVRCON = 0x81 or 0x84 | 814 | |
| IPD BOR, +85 °C | IPD_BOR | 14 | 19 | µA | VDD 3.0 V | 814 | |
| IPD BOR, +125 °C | IPD_BOR | 14 | 21 | µA | VDD 3.0 V | 814 | |
| IPD LPBOR, +85 °C | IPD_LPBOR | 0.7 | 5 | µA | VDD 3.0 V | 814 | |
| IPD LPBOR, +125 °C | IPD_LPBOR | 0.7 | 13 | µA | VDD 3.0 V | 814 | |
| IPD comparator, +85 °C | IPD_CMP | 31 | 47 | µA | VDD 3.0 V | 814 | |
| IPD comparator, +125 °C | IPD_CMP | 31 | 50 | µA | VDD 3.0 V | 814 | |
| Supply current, XT = 4 MHz | IDDXT4 | 575 | 750 | µA | XT = 4 MHz; 3.0 V | 812 | |
| Supply current, HFINTOSC = 16 MHz | IDDHFO16 | 2.3 | 3.2 | mA | HFINTOSC = 16 MHz; 3.0 V | 812 | |
| Supply current, HFINTOSC = 64 MHz (PLL) | IDDHFOPLL | 8.5 | 12 | mA | HFINTOSC = 64 MHz; 3.0 V | 812 | |
| Supply current, HS+PLL = 64 MHz | IDDHSPLL64 | 8.3 | 11 | mA | HS+PLL = 64 MHz; 3.0 V | 812 | |
| Input low voltage, I/O with TTL buffer | VIL | 0.8 | V | 4.5 V ≤ VDD ≤ 5.5 V | 815 | ||
| Input low voltage, I/O (D301) | VIL | 0.15 | ×VDD | 1.8 V ≤ VDD ≤ 4.5 V; printed as 0.15 VDD | 815 | ||
| Input low voltage, I/O with Schmitt trigger buffer | VIL | 0.2 | ×VDD | 2.0 V ≤ VDD ≤ 5.5 V; printed as 0.2 VDD | 815 | ||
| Input low voltage, I/O with I2C levels | VIL | 0.3 | ×VDD | printed as 0.3 VDD | 815 | ||
| Input low voltage, I/O with SMBus levels | VIL | 0.8 | V | 2.7 V ≤ VDD ≤ 5.5 V | 815 | ||
| Input low voltage, MCLR | VIL | 0.2 | ×VDD | printed as 0.2 VDD | 815 | ||
| Input high voltage, I/O with TTL buffer | VIH | 2 | V | 4.5 V ≤ VDD ≤ 5.5 V | 815 | ||
| Input high voltage, I/O (D321) | VIH | 0.25 | ×VDD | 1.8 V ≤ VDD ≤ 4.5 V; printed as 0.25 VDD + 0.8 V | 815 | ||
| Input high voltage, I/O with Schmitt trigger buffer | VIH | 0.8 | ×VDD | 2.0 V ≤ VDD ≤ 5.5 V; printed as 0.8 VDD | 815 | ||
| Input high voltage, I/O with I2C levels | VIH | 0.7 | ×VDD | printed as 0.7 VDD | 815 | ||
| Input high voltage, I/O with SMBus levels | VIH | 2.1 | V | 2.7 V ≤ VDD ≤ 5.5 V | 815 | ||
| Input high voltage, MCLR | VIH | 0.7 | ×VDD | printed as 0.7 VDD | 815 | ||
| Input leakage current, I/O, 85 °C | IIL | -125 | 5 | 125 | nA | VSS ≤ VPIN ≤ VDD; pin at high-impedance, 85 °C | 815 |
| Input leakage current, I/O, 125 °C | IIL | -1000 | 5 | 1000 | nA | VSS ≤ VPIN ≤ VDD; pin at high-impedance, 125 °C | 815 |
| Input leakage current, MCLR | IIL | -200 | 50 | 200 | nA | VSS ≤ VPIN ≤ VDD; pin at high-impedance, 85 °C | 815 |
| Weak pull-up current | IPUR | 25 | 120 | 200 | µA | VDD = 3.0 V; VPIN = VSS | 815 |
| Output low voltage, I/O | VOL | 0.6 | V | IOL = 10.0 mA; VDD = 3.0 V | 815 | ||
| Output high voltage, I/O | VOH | 0.7 | V | IOH = 6.0 mA; VDD = 3.0 V; printed as VDD − 0.7 V | 816 | ||
| Byte erase and write cycle time | TD_BEW | 4 | 5 | ms | 816 | ||
| Self-timed row erase or write time | TP_REW | 2 | 2.5 | ms | 817 | ||
| Operating ambient temperature, industrial | TA | -40 | 85 | °C | Industrial grade (-I) | 807 | |
| Ambient temperature under bias | TA | -40 | 125 | °C | 806 | ||
| Storage temperature | TSTORE | -65 | 150 | °C | 806 | ||
| Voltage on VDD pin | VDD | -0.3 | 6.5 | V | VSS reference; PIC18F65/66K40 | 806 | |
| Voltage on MCLR pin | VMCLR | -0.3 | 9 | V | VSS reference | 806 | |
| Maximum current on VSS pin | IVSS | 350 | mA | -40 °C ≤ TA ≤ +85 °C | 806 | ||
| Maximum current on VDD pin | IVDD | 350 | mA | -40 °C ≤ TA ≤ +85 °C | 806 | ||
| Maximum current on any standard I/O pin | IIO | -50 | 50 | mA | printed as ±50 mA | 806 | |
| Clamp current IK | IK | -20 | 20 | mA | VPIN < 0 or VPIN > VDD; printed as ±20 mA | 806 | |
| Total power dissipation | PD | 800 | mW | 806 | |||
| Thermal resistance, junction to ambient, 64-pin TQFP | θJA | 59 | °C/W | 64-pin TQFP package | 817 | ||
| Instruction period | TCY | 62.5 | ns | OS22; TCY = 1/FCY | 819 | ||
| System clock frequency | FOSC | 64 | MHz | Note 2, Note 3 | 819 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PPS | body RxyPPS | 356 |
CAD (KiCad official)
- Symbol:
PIC18F65K40T-I - Footprint:
Package_QFP:TQFP-64_10x10mm_P0.5mm - 3D model: TQFP-64(10x10) (KiCad packages3D, STEP)
- 3D model files:
pic18f65k40t-i-pt-etched.step/pic18f65k40t-i-pt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic18f65k40t-i-pt.step/pic18f65k40t-i-pt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (872 pp, sha256
a9bbf3977177cb83, retrieved 2026-11-20) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).