component
AP2114H-1.8TRG1
Public Made by Adomby adom
Diodes Incorporated Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-223. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownAP2114H-1.8TRG1
Diodes Incorporated · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-223
AP2114H-1.8TRG1 from Diodes Incorporated, in a SOT-223. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference pin for the regulator; the datasheet gives no separate current or voltage limit for this pin. |
| 2 | VOUT | power_out | Regulated output of 1.8V (fixed version), guaranteed to ±1.5% accuracy with a minimum output current of 1A. |
| 3 | VIN | power_in | Input voltage pin, with recommended supply range 2.5V to 6.0V and absolute maximum rating of 6.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-223 |
| Category | Power Management (PMIC) |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Accuracy | -1.5 | 1.5 | % | 1 | |||
| Output Voltage | VOUT | 1.8 | V | VIN =2.8V, 1mA ≤ IOUT ≤ 30mA | 10 | ||
| Load Regulation | ΔVOUT/VOUT ΔIOUT | 0.2 | 1 | %/A | VIN=2.8V, 1mA ≤ IOUT ≤1A | 10 | |
| Line Regulation | ΔVOUT/VOUT ΔVIN | -0.1 | 0.02 | 0.1 | %/V | 2.8V≤VIN≤6V, IOUT=30mA | 10 |
| Dropout Voltage | VDROP | 500 | 700 | mV | IOUT=1.0A | 10 | |
| Quiescent Current | IQ | 60 | 75 | μA | VIN=2.8V, IOUT=0mA | 10 | |
| Output Voltage Temperature Coefficient | ΔVOUT/VOUT ΔT | -30 | 30 | ppm/°C | IOUT=30mA, TA =-40°C to 85°C | 10 | |
| Standby Current | ISTD | 0.01 | 1 | μA | VIN=2.8V, VEN in OFF mode | 10 | |
| EN Pull Down Resistor | RPD | 3 | MΩ | 10 | |||
| VOUT Discharge Resistor | RDCHG | 60 | Ω | Set EN pin at Low | 10 | ||
| Thermal Shutdown Temperature | TOTSD | 160 | °C | 10 | |||
| Thermal Shutdown Hysteresis | THYOTSD | 25 | °C | 10 | |||
| Thermal Resistance Junction to Case, SOT-223 | θJC | 50.9 | °C/W | Junction to case, SOT-223 | 10 | ||
| Thermal Resistance Junction to Ambient, SOT-223 | θJA | 128 | °C/W | No heatsink, junction to ambient, SOT-223 | 7 | ||
| Supply Voltage | VIN | 2.5 | 6 | V | 7 | ||
| Operating Ambient Temperature Range | TA | -40 | 85 | °C | 7 | ||
| Power Supply Voltage | VIN | 6.5 | V | 7 | |||
| Operating Junction Temperature Range | TJ | 150 | ºC | 7 | |||
| Storage Temperature Range | TSTG | -65 | 150 | ºC | 7 | ||
| Lead Temperature (Soldering, 10sec) | TLEAD | 260 | ºC | Soldering, 10 sec | 7 | ||
| ESD (Machine Model) | 400 | V | Machine model | 7 | |||
| ESD (Human Body Model) | 4000 | V | Human body model | 7 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | Abs | ESD (Human Body Model) 4000 V Note 1: Stresses greater than those listed under “Absolute Maximum Ratings” may cause permanent damage to | 7 |
CAD (KiCad official)
- Symbol:
AP2114H-1.8TRG1 - Footprint:
Package_TO_SOT_SMD:SOT-223-3_TabPin2 - 3D model: SOT-223 (KiCad packages3D, STEP)
- 3D model files:
ap2114h-1-8trg1-etched.step/ap2114h-1-8trg1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ap2114h-1-8trg1.step/ap2114h-1-8trg1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (33 pp, sha256
d20cd46c5f472fe2, retrieved 2026-10-16, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).