component
ISO7721FQDWRQ1
Public Made by Adomby adom
Texas Instruments Digital Isolators, SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownISO7721FQDWRQ1
Texas Instruments · Digital Isolators · SOIC-16
ISO7721FQDWRQ1 from Texas Instruments, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND1 | power_in | Ground connection for VCC1 on the input side; decouple VCC1 to GND1 with 0.1 µF as recommended by the datasheet. |
| 2 | NC | unconnected | Not connected per the DW-16 pin table; no function on this device. |
| 3 | VCC1 | power_in | Input-side supply voltage, recommended 2.25 V to 5.5 V, set independently of VCC2; place a 0.1 µF decoupling capacitor between VCC1 and GND1. |
| 4 | OUTA | output | Channel A output on the input-side reference (reverse-direction channel driven from INA, pin 13); on F-suffix devices it defaults low when the input side is unpowered or INA is open. |
| 5 | INB | input | Channel B logic input referenced to VCCI, with VIH at least 0.7 x VCCI and VIL at most 0.3 x VCCI, supporting up to 100 Mbps. |
| 6 | NC | unconnected | Not connected per the DW-16 pin table; no function on this device. |
| 7 | GND1 | power_in | Ground connection for VCC1 on the input side (second input-side ground pin on the DW-16 package). |
| 8 | NC | unconnected | Not connected per the DW-16 pin table; no function on this device. |
| 9 | GND2 | power_in | Ground connection for VCC2 on the output side; decouple VCC2 to GND2 with 0.1 µF. |
| 10 | NC | unconnected | Not connected per the DW-16 pin table; no function on this device. |
| 11 | NC | unconnected | Not connected per the DW-16 pin table; no function on this device. |
| 12 | OUTB | output | Channel B output referenced to VCCO; VOH is at least VCCO - 0.4 V at 5 V with IOH = -4 mA, and the F-suffix device defaults low when the input is unpowered or open. |
| 13 | INA | input | Channel A logic input (reverse-direction channel) on the output-side reference, with VIH at least 0.7 x VCCI and VIL at most 0.3 x VCCI, supporting up to 100 Mbps. |
| 14 | VCC2 | power_in | Output-side supply voltage, recommended 2.25 V to 5.5 V, set independently of VCC1; place a 0.1 µF decoupling capacitor between VCC2 and GND2. |
| 15 | NC | unconnected | Not connected per the DW-16 pin table; no function on this device. |
| 16 | GND2 | power_in | Ground connection for VCC2 on the output side (second output-side ground pin on the DW-16 package). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-16 |
| Category | Signal Isolation Devices |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
ISO7721FQDWRQ1 - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files:
iso7721fqdwrq1-etched.step/iso7721fqdwrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);iso7721fqdwrq1.step/iso7721fqdwrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (52 pp, sha256
fbb553de6ff2b6fe, retrieved 2026-10-08, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).