component
TSU101ICT
Public Made by Adomby adom
STMicroelectronics Operational Amplifier, SC-70-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTSU101ICT
STMicroelectronics · Operational Amplifier · SC-70-5
TSU101ICT from STMicroelectronics, in a SC-70-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN+ | input | Non-inverting input with rail-to-rail common mode range of (VCC-) - 0.1 V to (VCC+) + 0.1 V and 5 pA max input bias current at 25 °C. |
| 2 | VCC- | power_in | Negative supply voltage, ground in single-supply use; supply range VCC is 1.5 V to 5.5 V. |
| 3 | IN- | input | Inverting input with rail-to-rail common mode range of (VCC-) - 0.1 V to (VCC+) + 0.1 V and 5 pA max input bias current at 25 °C. |
| 4 | OUT | output | Rail-to-rail output stage with 4 mA min sink and source current at 1.8 V, and output swing within 40 mV of the rails at RL = 100 kΩ. |
| 5 | VCC+ | power_in | Positive supply voltage of 1.5 V to 5.5 V (6 V absolute maximum), with a 10 nF decoupling capacitor recommended close to the pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SC-70-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
CAD (KiCad official)
- Symbol:
TSU101ICT - Footprint:
Package_TO_SOT_SMD:SOT-353_SC-70-5 - 3D model: SC-70-5 (KiCad packages3D, STEP)
- 3D model files:
tsu101ict-etched.step/tsu101ict-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tsu101ict.step/tsu101ict.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (33 pp, sha256
07f1bbe8d941a985, retrieved 2026-10-10, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).