component
MCP1319T-29LE
Public Made by Adomby adom
Microchip Tech Monitors & Reset Circuits, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMCP1319T-29LE
Microchip Tech · Monitors & Reset Circuits · SOT-23-5
MCP1319T-29LE from Microchip Tech, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RST | output | Push-pull active-low Reset output that is driven low when VDD falls below the trip point VTRIP, when MR is forced low, and during power-up, and returns high once VDD rises above VTRIP + VHYS and the Reset delay expires. |
| 2 | VSS | power_in | The ground reference for the device. |
| 3 | RST | output | Push-pull active-high Reset output that is driven high when VDD falls below VTRIP, when MR is forced low, and during power-up, and is driven low once VDD rises above VTRIP + VHYS and the Reset delay expires. |
| 4 | MR | input | Active-low Manual Reset input with an internal pull-up resistor that forces both RST/RST outputs active when pulled low by a push-button, and filters noise pulses on the pin. |
| 5 | VDD | power_in | The positive supply for the device, rated for a voltage range of 1.0V to 5.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range | VDD | 1 | 5.5 | V | 3 | ||
| Specified VDD Value to VOUT Low | VDD | 1 | V | IRST = 10 µA, VRST < 0.3V | 3 | ||
| Operating Current IDD (Watchdog Timer Inactive) | IDD | 1 | 2 | µA | Watchdog Timer Inactive | 3 | |
| Operating Current IDD (VDD < VTRIP) | IDD | 1 | 2 | µA | VDD < VTRIP | 3 | |
| Operating Current IDD (Reset Delay Timer Active) | IDD | 5 | 10 | µA | Reset Delay Timer Active | 3 | |
| VDD Trip Point MCP13XX-29 (+25°C) | VTRIP | 2.857 | 2.9 | 2.944 | V | TA = +25°C (Note 1) | 4 |
| VDD Trip Point MCP13XX-29 (-40°C to +125°C) | VTRIP | 2.828 | 2.9 | 2.973 | V | TA = -40°C to +125°C (Note 2) | 4 |
| VDD Trip Point Tempco | TTPCO | -40 | 40 | ppm/°C | 5 | ||
| Threshold Hysteresis MCP13XX-29 (+25°C) | VHYS | 0.029 | 0.174 | V | TA = +25°C (Note 3) | 6 | |
| RST/RST Low-Level Output Voltage | VOL | 0.3 | V | IOL = 50 µA, 1.0V ≤ VDD ≤ 1.5V | 8 | ||
| Input Leakage Current (MR and WDI) | IIL | -1 | 1 | µA | VSS ≤ VPIN ≤ VDD | 8 | |
| Output Pin Capacitive Loading (RST and RST) | CO | 50 | pF | Tester loading to meet the AC timing specifications | 8 | ||
| Reset Delay Time-Out (Standard Time Out) | tRST | 140 | 200 | 280 | ms | Standard Time Out | 9 |
| MR Pulse Width | tMR | 1 | µs | 10 | |||
| Specified Temperature Range | TA | -40 | 125 | °C | Except MCP13XX-25 (or below) | 11 | |
| Thermal Resistance, 5L-SOT-23 | θJA | 220.7 | °C/W | 5L-SOT-23 | 11 | ||
| Supply Voltage (VDD to VSS) | VDD | 7 | V | VDD to VSS | 3 | ||
| Input Current (VDD) | IIN | 10 | mA | 3 | |||
| Output Current (RST) | IOUT | 10 | mA | 3 | |||
| Voltage on all inputs and outputs (lower limit) | -0.6 | V | Except Open-Drain RST (no internal pull-up resistor), w.r.t. VSS; upper limit printed as VDD + 1.0V | 3 | |||
| Ambient Temperature with Power Applied | TA | -40 | 125 | °C | Power applied | 3 | |
| Maximum Junction Temperature with Power Applied | TJ | 150 | °C | Power applied | 3 | ||
| Storage Temperature | TSTG | -65 | 150 | °C | 3 |
CAD (KiCad official)
- Symbol:
MCP1319T-29LE - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
mcp1319t-29le-etched.step/mcp1319t-29le-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mcp1319t-29le.step/mcp1319t-29le.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (54 pp, sha256
f313bca289b277f3, retrieved 2026-10-23, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).