component
M95P32-IXMNT
Public Made by Adomby adom
STMicroelectronics EEPROM, SO-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownM95P32-IXMNT
STMicroelectronics · EEPROM · SO-8
M95P32-IXMNT from STMicroelectronics, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | S | input | Chip select input; device active and selected when driven low, deselected with outputs in high-impedance state when driven high. |
| 2 | Q-DQ1 | output | Serial data output (MISO) in single-output mode with data shifted out on falling clock edge; becomes DQ1 output in dual and quad modes. |
| 3 | W-DQ2 | bidirectional | Write protect input controlling block protection bits status during write operations; becomes DQ2 output in quad-output read mode. |
| 4 | VSS | power_in | Ground reference and signal return for all signals including VCC supply voltage. |
| 5 | D-DQ0 | bidirectional | Serial data input (MOSI) for instructions and data with values latched on rising clock edge; becomes DQ0 output in dual and quad read modes. |
| 6 | C | input | Serial clock input with maximum frequency of 80 MHz synchronizing instruction and data latching on rising edge and output on falling edge. |
| 7 | HOLD-DQ3 | bidirectional | Hold input to pause all serial communications without device deselection; becomes DQ3 output in quad-output read mode after address bytes. |
| 8 | VCC | power_in | Device core power supply with operating range 1.6 to 3.6 V for industrial temperature grade M95P32-I. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Package | SO-8 |
| Category | Memory |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
M95P32-IXMNT - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
m95p32-ixmnt-etched.step/m95p32-ixmnt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);m95p32-ixmnt.step/m95p32-ixmnt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STMicroelectronics datasheet (71 pp, sha256
f3a57cf824644632, retrieved 2026-09-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).