component
DAC5578SPWR
Public Made by Adomby adom
Texas Instruments Digital To Analog Converters (DAC), TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownDAC5578SPWR
Texas Instruments · Digital To Analog Converters (DAC) · TSSOP-16
DAC5578SPWR from Texas Instruments, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | LDAC | input | Load DAC input, negative-edge triggered for asynchronous updates or tie to GND for synchronous operation. |
| 2 | ADDR0 | input | I2C address select input, configure via AVDD, GND, or leave floating. |
| 3 | AVDD | power_in | Analog power supply input, 2.7V to 5.5V. |
| 4 | VOUTA | output | Analog output from DAC channel A, 0V to AVDD. |
| 5 | VOUTC | output | Analog output from DAC channel C, 0V to AVDD. |
| 6 | VOUTE | output | Analog output from DAC channel E, 0V to AVDD. |
| 7 | VOUTG | output | Analog output from DAC channel G, 0V to AVDD. |
| 8 | VREFIN | input | Positive reference input for DAC output scaling, 0V to 5V. |
| 9 | CLR | input | Asynchronous clear input, active low to set all DAC outputs to configured code. |
| 10 | VOUTH | output | Analog output from DAC channel H, 0V to AVDD. |
| 11 | VOUTF | output | Analog output from DAC channel F, 0V to AVDD. |
| 12 | VOUTD | output | Analog output from DAC channel D, 0V to AVDD. |
| 13 | VOUTB | output | Analog output from DAC channel B, 0V to AVDD. |
| 14 | GND | power_in | Ground reference for all on-device circuitry. |
| 15 | SDA | bidirectional | Bidirectional open-drain I2C serial data line requiring external pull-up resistor. |
| 16 | SCL | input | I2C serial clock input, Schmitt-trigger logic, maximum 3.4MHz. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-16 |
| Category | Data Acquisition |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
DAC5578SPWR - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
dac5578spwr-etched.step/dac5578spwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);dac5578spwr.step/dac5578spwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (60 pp, sha256
384236e44db678a7, retrieved 2026-09-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).