Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

AD9201ARSZ

Analog Devices · Pre-ordered Chips · SSOP-28-208mil

AD9201ARSZ from Analog Devices, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DVSS power_in Digital ground.
2 DVDD power_in Digital supply for the output drivers, operable from 2.7 V to 5.5 V independent of the analog supply.
3 D0 tri_state Bit 0 (LSB) of the multiplexed 10-bit digital output, high-impedance when CHIP-SELECT is high.
4 D1 tri_state Bit 1 of the multiplexed 10-bit digital output, high-impedance when CHIP-SELECT is high.
5 D2 tri_state Bit 2 of the multiplexed 10-bit digital output, high-impedance when CHIP-SELECT is high.
6 D3 tri_state Bit 3 of the multiplexed 10-bit digital output, high-impedance when CHIP-SELECT is high.
7 D4 tri_state Bit 4 of the multiplexed 10-bit digital output, high-impedance when CHIP-SELECT is high.
8 D5 tri_state Bit 5 of the multiplexed 10-bit digital output, high-impedance when CHIP-SELECT is high.
9 D6 tri_state Bit 6 of the multiplexed 10-bit digital output, high-impedance when CHIP-SELECT is high.
10 D7 tri_state Bit 7 of the multiplexed 10-bit digital output, high-impedance when CHIP-SELECT is high.
11 D8 tri_state Bit 8 of the multiplexed 10-bit digital output, high-impedance when CHIP-SELECT is high.
12 D9 tri_state Bit 9 (MSB) of the multiplexed 10-bit digital output, high-impedance when CHIP-SELECT is high.
13 SELECT input Output mux select: high outputs I channel, low outputs Q channel.
14 CLOCK input Clock input; both ADCs sample on the rising edge, and the input is limited to AVSS-0.3 V to AVDD+0.3 V.
15 SLEEP input Power-down control: high powers down, low is normal operation.
16 INA-I input I channel analog input A, buffered, with absolute maximum range of AVSS-1.0 V to AVDD+0.3 V.
17 INB-I input I channel analog input B, buffered, with absolute maximum range of AVSS-1.0 V to AVDD+0.3 V.
18 REFT-I passive Top reference decoupling pin for the I channel.
19 REFB-I passive Bottom reference decoupling pin for the I channel.
20 AVSS power_in Analog ground.
21 REFSENSE input Reference select: tie to VREF for 1 V span, AVSS for 2 V span, resistor divider tap for programmable reference, or AVDD for external reference.
22 VREF power_in Internal reference output (or external reference input when REFSENSE is tied to AVDD), range AVSS-0.3 V to AVDD+0.3 V.
23 AVDD power_in Analog supply, operable from 2.7 V to 5.5 V.
24 REFB-Q passive Bottom reference decoupling pin for the Q channel.
25 REFT-Q passive Top reference decoupling pin for the Q channel.
26 INB-Q input Q channel analog input B, buffered, with absolute maximum range of AVSS-1.0 V to AVDD+0.3 V.
27 INA-Q input Q channel analog input A, buffered, with absolute maximum range of AVSS-1.0 V to AVDD+0.3 V.
28 CHIP-SELECT input Output enable: high puts the outputs in high impedance, low is normal operation.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SSOP-28-208mil
Category Interface ICs
Pins 28

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Voltage AVDD AVDD 2.7 3 5.5 V AVDD, DVDD ≤ 2.3 V 2
Operating Voltage DRVDD DRVDD 2.7 3 5.5 V 2
Power Consumption PD 215 245 mW AVDD = DVDD = 3 V 2
Differential Nonlinearity (SE) DNL 0.5 1 LSB REFT = 1 V, REFB = 0 V 2
Integral Nonlinearity (SE) INL 1.5 2.5 LSB 2
Zero-Scale Error, Offset Error EZS 1.5 3.8 % FS 2
Full-Scale Error, Gain Error EFS 3.5 5.4 % FS 2
Power Supply Rejection PSR 0.8 1.3 % FS 2
Signal-to-Noise and Distortion SINAD 55.6 57.3 dB f = 3.58 MHz 2
Signal-to-Noise SNR 55.9 57.8 dB f = 3.58 MHz 2
Total Harmonic Distortion THD -69 -63.3 dB f = 3.58 MHz 2
Spurious Free Dynamic Range SFDR -73 -66 dB f = 3.58 MHz 2
High Input Voltage VIH 2.4 V 3
Low Input Voltage VIL 0.3 V 3
DC Leakage Current IIN 6 µA 3
High Level Output Voltage (DVDD = 3 V) VOH 2.88 V IOH = 50 µA 3
Low Level Output Voltage (DVDD = 3 V) VOL 0.095 V IOL = 1.5 mA 3
High Level Output Voltage (DVDD = 5 V) VOH 4.5 V IOH = 50 µA 3
Low Level Output Voltage (DVDD = 5 V) VOL 0.4 V IOL = 1.5 mA 3
Data Valid Delay tOD 11 ns 3
MUX Select Delay tMD 7 ns 3
Data Enable Delay tED 13 ns CL = 20 pF. Output Level to 90% of Final Value 3
Data High-Z Delay tDHZ 13 ns CL = 20 pF. Output Level to 90% of Final Value 3
Clock Pulsewidth High tCH 22.5 ns 3
Clock Pulsewidth Low tCL 22.5 ns 3
AVDD to AVSS AVDD -0.3 6.5 V With respect to AVSS 4
DVDD to DVSS DVDD -0.3 6.5 V With respect to DVSS 4
AVSS to DVSS AVSS -0.3 0.3 V With respect to DVSS 4
AVDD to DVDD AVDD -6.5 6.5 V With respect to DVDD 4
CLK CLK -0.3 V With respect to AVSS; max AVDD + 0.3 V 4
Digital Outputs -0.3 V With respect to DVSS; max DVDD + 0.3 V 4
AINA, AINB -1 V With respect to AVSS; max AVDD + 0.3 V 4
VREF VREF -0.3 V With respect to AVSS; max AVDD + 0.3 V 4
REFSENSE -0.3 V With respect to AVSS; max AVDD + 0.3 V 4
REFT, REFB -0.3 V With respect to AVSS; max AVDD + 0.3 V 4
Junction Temperature 150 °C 4
Storage Temperature -65 150 °C 4
Lead Temperature 300 °C 10 sec 4
Operating Temperature Range -40 85 °C AD9201ARS 4
Resolution 10 Bits 2
Conversion Rate FS 20 MHz 2
Differential Nonlinearity DNL 0.4 LSB REFT = 1 V, REFB = 0 V 2
Output Voltage Tolerance (1 V Mode) -10 10 mV REFSENSE = VREF 2
Output Voltage Tolerance (2 V Mode) -15 15 mV REFSENSE = GND 2

CAD (KiCad official)

  • Symbol: AD9201ARSZ
  • Footprint: Package_SO:SSOP-28_5.3x10.2mm_P0.65mm
  • 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
  • 3D model files: ad9201arsz-etched.step / ad9201arsz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ad9201arsz.step / ad9201arsz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (20 pp, sha256 7307385eeac3f8a9, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF